Re: [PATCH v3 3/4] drm/panel: jd9365da: Support for kd101ne3-40ti MIPI-DSI panel.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jun 14, 2024 at 10:55:09PM GMT, Zhaoxiong Lv wrote:
> The K&d kd101ne3-40ti is a 10.1" WXGA TFT-LCD panel, use
> jd9365da controller,which fits in nicely with the existing
> panel-jadard-jd9365da-h3 driver.Hence,we add a new compatible
> with panel specific config.
> 
> Although they have the same control IC, the two panels are different,
> and the timing will be slightly different, so we added some variables
> in struct jadard_panel_desc to control the timing
> 
> Signed-off-by: Zhaoxiong Lv <lvzhaoxiong@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
> ---
> 
> Chage since V3:
> -  1. Give up creating a new driver and re-add K&d kd101ne3-40ti 
> -     configuration to the panel-jadard-jd9365da-h3.c driver.
> 
> V2:https://lore.kernel.org/all/20240601084528.22502-3-lvzhaoxiong@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/
> 
> Chage since V2:
> 
> -  1. Use the new mipi_dsi_dcs_write_seq_multi() function.
> -  2. Modify Move mipi_dsi_dcs_set_display_off() and mipi_dsi_dcs_enter_sleep_mode() to disable(),
> -  and drop kingdisplay_panel_enter_sleep_mode().
> -  3. If prepare fails, disable GPIO before regulators.
> -  4. This function drm_connector_set_panel_orientation() is no longer used. Delete it.
> -  5. Drop ".shutdown = kingdisplay_panel_shutdown".
> 
> ---
>  .../gpu/drm/panel/panel-jadard-jd9365da-h3.c  | 284 ++++++++++++++++++
>  1 file changed, 284 insertions(+)
> 
> diff --git a/drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c b/drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c
> index b39f01d7002e..f6e130567707 100644
> --- a/drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c
> +++ b/drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c
> @@ -27,6 +27,15 @@ struct jadard_panel_desc {
>  	enum mipi_dsi_pixel_format format;
>  	int (*init)(struct jadard *jadard);
>  	u32 num_init_cmds;
> +	bool lp11_before_reset;
> +	bool power_off_vcioo_before_reset;
> +	unsigned int vcioo_to_lp11_delay;
> +	unsigned int lp11_to_reset_delay;
> +	unsigned int exit_sleep_to_display_on_delay;
> +	unsigned int display_on_delay;
> +	unsigned int backlight_off_to_display_off_delay;
> +	unsigned int display_off_to_enter_sleep_delay;
> +	unsigned int enter_sleep_to_reset_down_delay;
>  };
>  
>  struct jadard {
> @@ -57,10 +66,18 @@ static int jadard_enable(struct drm_panel *panel)
>  	if (err < 0)
>  		DRM_DEV_ERROR(dev, "failed to exit sleep mode ret = %d\n", err);
>  
> +	/* tSLPOUT >= 120ms */

The comments are probably applicable to your panel, but not to the other
panels.

> +	if (jadard->desc->exit_sleep_to_display_on_delay)
> +		msleep(jadard->desc->exit_sleep_to_display_on_delay);

Maybe extend mipi_dsi_msleep to skip slipping if delay is 0 and then use
_multi here too?

> +
>  	err =  mipi_dsi_dcs_set_display_on(dsi);
>  	if (err < 0)
>  		DRM_DEV_ERROR(dev, "failed to set display on ret = %d\n", err);
>  
> +	/* tDISON >= 20ms */
> +	if (jadard->desc->display_on_delay)
> +		msleep(jadard->desc->display_on_delay);
> +
>  	return 0;
>  }
>  
> @@ -70,14 +87,26 @@ static int jadard_disable(struct drm_panel *panel)
>  	struct jadard *jadard = panel_to_jadard(panel);
>  	int ret;
>  
> +	/* tBLOFF:Backlight_to_0x28h >= 100ms */
> +	if (jadard->desc->backlight_off_to_display_off_delay)
> +		msleep(jadard->desc->backlight_off_to_display_off_delay);
> +
>  	ret = mipi_dsi_dcs_set_display_off(jadard->dsi);
>  	if (ret < 0)
>  		DRM_DEV_ERROR(dev, "failed to set display off: %d\n", ret);
>  
> +	/* tDISOFF >= 50ms */
> +	if (jadard->desc->display_off_to_enter_sleep_delay)
> +		msleep(jadard->desc->display_off_to_enter_sleep_delay);
> +
>  	ret = mipi_dsi_dcs_enter_sleep_mode(jadard->dsi);
>  	if (ret < 0)
>  		DRM_DEV_ERROR(dev, "failed to enter sleep mode: %d\n", ret);
>  
> +	/* tSLPIN >= 100ms */
> +	if (jadard->desc->enter_sleep_to_reset_down_delay)
> +		msleep(jadard->desc->enter_sleep_to_reset_down_delay);
> +
>  	return 0;
>  }
>  
> @@ -94,6 +123,21 @@ static int jadard_prepare(struct drm_panel *panel)
>  	if (ret)
>  		return ret;
>  
> +	/* tMIPI_ON >= 0ms */
> +	if (jadard->desc->vcioo_to_lp11_delay)
> +		msleep(jadard->desc->vcioo_to_lp11_delay);
> +
> +	if (jadard->desc->lp11_before_reset) {
> +		ret = mipi_dsi_dcs_nop(jadard->dsi);
> +		if (ret < 0)
> +			goto poweroff;
> +
> +		usleep_range(1000, 2000);
> +	}
> +	/* tRPWIRES >= 5ms */
> +	if (jadard->desc->lp11_to_reset_delay)
> +		msleep(jadard->desc->lp11_to_reset_delay);
> +
>  	gpiod_set_value(jadard->reset, 1);
>  	msleep(5);
>  
> @@ -125,6 +169,12 @@ static int jadard_unprepare(struct drm_panel *panel)
>  	gpiod_set_value(jadard->reset, 1);
>  	msleep(120);
>  
> +	if (jadard->desc->power_off_vcioo_before_reset) {
> +		gpiod_set_value(jadard->reset, 0);

The implemented behaviour contradicts with the name of the flag. If the
flag is set, then reset is down before powering down the vccio supply.

> +
> +		usleep_range(1000, 2000);
> +	}
> +
>  	regulator_disable(jadard->vdd);
>  	regulator_disable(jadard->vccio);
>  
> @@ -586,7 +636,237 @@ static const struct jadard_panel_desc cz101b4001_desc = {
>  	.lanes = 4,
>  	.format = MIPI_DSI_FMT_RGB888,
>  	.init = cz101b4001_init_cmds,
> +};
> +

[skipped]

> +
> +static const struct jadard_panel_desc kingdisplay_kd101ne3_40ti_desc = {
> +	.mode = {
> +		.clock		= 70595,

Please change this to something like:
(800 + 30 + 30 + 30) * (1280 + 30 + 4 + 8) * 60 / 1000

> +
> +		.hdisplay	= 800,
> +		.hsync_start	= 800 + 30,
> +		.hsync_end	= 800 + 30 + 30,
> +		.htotal		= 800 + 30 + 30 + 30,
> +
> +		.vdisplay	= 1280,
> +		.vsync_start	= 1280 + 30,
> +		.vsync_end	= 1280 + 30 + 4,
> +		.vtotal		= 1280 + 30 + 4 + 8,
> +
> +		.width_mm	= 135,
> +		.height_mm	= 216,
> +		.type		= DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
> +	},
> +	.lanes = 4,
> +	.format = MIPI_DSI_FMT_RGB888,
> +	.init = kingdisplay_kd101ne3_init_cmds,
> +	.lp11_before_reset = true,
> +	.power_off_vcioo_before_reset = true,
> +	.vcioo_to_lp11_delay = 5,
> +	.lp11_to_reset_delay = 10,
> +	.exit_sleep_to_display_on_delay = 120,
> +	.display_on_delay = 20,
> +	.backlight_off_to_display_off_delay = 100,
> +	.display_off_to_enter_sleep_delay = 50,
> +	.enter_sleep_to_reset_down_delay = 100,
>  };
>  
>  static int jadard_dsi_probe(struct mipi_dsi_device *dsi)
> @@ -665,6 +945,10 @@ static const struct of_device_id jadard_of_match[] = {
>  		.compatible = "radxa,display-8hd-ad002",
>  		.data = &radxa_display_8hd_ad002_desc
>  	},
> +	{
> +		.compatible = "kingdisplay,kd101ne3-40ti",
> +		.data = &kingdisplay_kd101ne3_40ti_desc
> +	},

Keep it sorted, please.

>  	{ /* sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(of, jadard_of_match);
> -- 
> 2.17.1
> 

-- 
With best wishes
Dmitry



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux