Re: [PATCH v3] drm/fb-helper: Detect when lid is closed during initialization

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi

Am 14.06.24 um 15:47 schrieb Mario Limonciello:
On 6/14/2024 03:15, Thomas Zimmermann wrote:
Hi Mario

Am 13.06.24 um 07:17 schrieb Mario Limonciello:
If the lid on a laptop is closed when eDP connectors are populated
then it remains enabled when the initial framebuffer configuration
is built.

When creating the initial framebuffer configuration detect the
lid status and if it's closed disable any eDP connectors.

Also set up a workqueue to monitor for any future lid events.

After reading through this patchset, I think fbdev emulation is not the right place for this code, as lid state is global.

You could put this into drm_client_modeset.c and track lid state per client. drm_fb_helper_lid_work() would call the client's hotplug callback. But preferable, lid state should be tracked per DRM device in struct drm_mode_config and call drm_client_dev_hotplug() on each lid-state event. Thoughts? Best regards Thomas

This is pretty similar to what I first did when moving from ACPI over to generic input switch.

It works for the initial configuration.  But I don't believe it makes sense for the lid switch events because not all DRM clients will "want" to respond to the lid switch events.  By leaving it up to the client for everything except fbdev emulation they can also track the lid switch and decide the policy.


All our current clients do fbdev emulation, possibly others would be the panic screen and a boot-up logo. A panic screen doesn't do actual mode setting, but any other client would most likely want enable and disable the display depending on the lid state. Having this code in the DRM client helpers make perfect sense. But as it's global state, it makes no sense to set this up per client. Hence the suggestion to manage this in per DRM device.

It would also make sense to try to integrate this into the probe helpers. When the lid state changes, the probe helpers would invoke the driver's regular hotplugging code.



I also worry about what happens if the kernel does a hotplug callback on lid events as well at the client choosing to do it. Don't we end up with two modesets?  So then I would think you need a handshake of some sort to decide whether to do it for a given client where fbdev emulation would opt in and then all other clients can choose to opt in or not.


What do you mean by the kernel does a hotplug event and the client does one? There should really only be one place to handle all of this. If we end up with two modesets, we'd get an additional flicker when the lid gets opened.


Best regards
Thomas



Suggested-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
Reported-by: Chris Bainbridge <chris.bainbridge@xxxxxxxxx>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3349
Signed-off-by: Mario Limonciello <mario.limonciello@xxxxxxx>
---
v2->v3:
  * Use input device instead of ACPI device
  * Detect lid open/close events
---
  drivers/gpu/drm/drm_client_modeset.c |  29 ++++++
  drivers/gpu/drm/drm_fb_helper.c      | 132 +++++++++++++++++++++++++++
  include/drm/drm_device.h             |   6 ++
  include/drm/drm_fb_helper.h          |   2 +
  4 files changed, 169 insertions(+)

diff --git a/drivers/gpu/drm/drm_client_modeset.c b/drivers/gpu/drm/drm_client_modeset.c
index 31af5cf37a09..b8adfe87334b 100644
--- a/drivers/gpu/drm/drm_client_modeset.c
+++ b/drivers/gpu/drm/drm_client_modeset.c
@@ -257,6 +257,34 @@ static void drm_client_connectors_enabled(struct drm_connector **connectors,
          enabled[i] = drm_connector_enabled(connectors[i], false);
  }
+static void drm_client_match_edp_lid(struct drm_device *dev,
+                     struct drm_connector **connectors,
+                     unsigned int connector_count,
+                     bool *enabled)
+{
+    int i;
+
+    for (i = 0; i < connector_count; i++) {
+        struct drm_connector *connector = connectors[i];
+
+        switch (connector->connector_type) {
+        case DRM_MODE_CONNECTOR_LVDS:
+        case DRM_MODE_CONNECTOR_eDP:
+            if (!enabled[i])
+                continue;
+            break;
+        default:
+            continue;
+        }
+
+        if (dev->lid_closed) {
+            drm_dbg_kms(dev, "[CONNECTOR:%d:%s] lid is closed, disabling\n",
+                    connector->base.id, connector->name);
+            enabled[i] = false;
+        }
+    }
+}
+
  static bool drm_client_target_cloned(struct drm_device *dev,
                       struct drm_connector **connectors,
                       unsigned int connector_count,
@@ -844,6 +872,7 @@ int drm_client_modeset_probe(struct drm_client_dev *client, unsigned int width,
          memset(crtcs, 0, connector_count * sizeof(*crtcs));
          memset(offsets, 0, connector_count * sizeof(*offsets));
+        drm_client_match_edp_lid(dev, connectors, connector_count, enabled);           if (!drm_client_target_cloned(dev, connectors, connector_count, modes,
                            offsets, enabled, width, height) &&
              !drm_client_target_preferred(dev, connectors, connector_count, modes, diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index d612133e2cf7..41dd5887599a 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -30,6 +30,8 @@
  #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  #include <linux/console.h>
+#include <linux/input.h>
+#include <linux/mod_devicetable.h>
  #include <linux/pci.h>
  #include <linux/sysrq.h>
  #include <linux/vga_switcheroo.h>
@@ -413,6 +415,128 @@ static void drm_fb_helper_damage_work(struct work_struct *work)
      drm_fb_helper_fb_dirty(helper);
  }
+static void drm_fb_helper_lid_event(struct input_handle *handle, unsigned int type,
+                    unsigned int code, int value)
+{
+    if (type == EV_SW && code == SW_LID) {
+        struct drm_fb_helper *fb_helper = handle->handler->private;
+
+        if (value != fb_helper->dev->lid_closed) {
+            fb_helper->dev->lid_closed = value;
+            queue_work(fb_helper->input_wq, &fb_helper->lid_work);
+        }
+    }
+}
+
+struct drm_fb_lid {
+    struct input_handle handle;
+};
+
+static int drm_fb_helper_lid_connect(struct input_handler *handler,
+                     struct input_dev *dev,
+                     const struct input_device_id *id)
+{
+    struct drm_fb_helper *fb_helper = handler->private;
+    struct drm_fb_lid *lid;
+    char *name;
+    int error;
+
+    lid = kzalloc(sizeof(*lid), GFP_KERNEL);
+    if (!lid)
+        return -ENOMEM;
+
+    name = kasprintf(GFP_KERNEL, "drm-fb-helper-lid-%s", dev_name(&dev->dev));
+    if (!name) {
+        error = -ENOMEM;
+        goto err_free_lid;
+    }
+
+    lid->handle.dev = dev;
+    lid->handle.handler = handler;
+    lid->handle.name = name;
+    lid->handle.private = lid;
+
+    error = input_register_handle(&lid->handle);
+    if (error)
+        goto err_free_name;
+
+    error = input_open_device(&lid->handle);
+    if (error)
+        goto err_unregister_handle;
+
+    fb_helper->dev->lid_closed = dev->sw[SW_LID];
+    drm_dbg_kms(fb_helper->dev, "initial lid state is set to %d\n", fb_helper->dev->lid_closed);
+
+    return 0;
+
+err_unregister_handle:
+    input_unregister_handle(&lid->handle);
+err_free_name:
+    kfree(name);
+err_free_lid:
+    kfree(lid);
+    return error;
+}
+
+static void drm_fb_helper_lid_disconnect(struct input_handle *handle)
+{
+    struct drm_fb_lid *lid = handle->private;
+
+    input_close_device(handle);
+    input_unregister_handle(handle);
+
+    kfree(handle->name);
+    kfree(lid);
+}
+
+static const struct input_device_id drm_fb_helper_lid_ids[] = {
+    {
+        .flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_SWBIT,
+        .evbit = { BIT_MASK(EV_SW) },
+        .swbit = { [BIT_WORD(SW_LID)] = BIT_MASK(SW_LID) },
+    },
+    { },
+};
+
+static struct input_handler drm_fb_helper_lid_handler = {
+    .event =    drm_fb_helper_lid_event,
+    .connect =    drm_fb_helper_lid_connect,
+    .disconnect =    drm_fb_helper_lid_disconnect,
+    .name =        "drm-fb-helper-lid",
+    .id_table =    drm_fb_helper_lid_ids,
+};
+
+static void drm_fb_helper_lid_work(struct work_struct *work)
+{
+    struct drm_fb_helper *fb_helper = container_of(work, struct drm_fb_helper,
+                               lid_work);
+    drm_fb_helper_hotplug_event(fb_helper);
+}
+
+static int drm_fb_helper_create_lid_handler(struct drm_fb_helper *fb_helper)
+{
+    int ret = 0;
+
+    if (fb_helper->deferred_setup)
+        return 0;
+
+    fb_helper->input_wq = create_singlethread_workqueue("drm-fb-lid");
+    if (fb_helper->input_wq == NULL)
+        return -ENOMEM;
+
+    drm_fb_helper_lid_handler.private = fb_helper;
+    ret = input_register_handler(&drm_fb_helper_lid_handler);
+    if (ret)
+        goto remove_wq;
+
+    return 0;
+
+remove_wq:
+    destroy_workqueue(fb_helper->input_wq);
+    fb_helper->input_wq = NULL;
+    return ret;
+}
+
  /**
   * drm_fb_helper_prepare - setup a drm_fb_helper structure
   * @dev: DRM device
@@ -445,6 +569,7 @@ void drm_fb_helper_prepare(struct drm_device *dev, struct drm_fb_helper *helper,
      spin_lock_init(&helper->damage_lock);
      INIT_WORK(&helper->resume_work, drm_fb_helper_resume_worker);
      INIT_WORK(&helper->damage_work, drm_fb_helper_damage_work);
+    INIT_WORK(&helper->lid_work, drm_fb_helper_lid_work);
      helper->damage_clip.x1 = helper->damage_clip.y1 = ~0;
      mutex_init(&helper->lock);
      helper->funcs = funcs;
@@ -593,6 +718,9 @@ void drm_fb_helper_fini(struct drm_fb_helper *fb_helper)
      if (!drm_fbdev_emulation)
          return;
+    input_unregister_handler(&drm_fb_helper_lid_handler);
+    destroy_workqueue(fb_helper->input_wq);
+
      cancel_work_sync(&fb_helper->resume_work);
      cancel_work_sync(&fb_helper->damage_work);
@@ -1842,6 +1970,10 @@ __drm_fb_helper_initial_config_and_unlock(struct drm_fb_helper *fb_helper)
      width = dev->mode_config.max_width;
      height = dev->mode_config.max_height;
+    ret = drm_fb_helper_create_lid_handler(fb_helper);
+    if (ret)
+        return ret;
+
      drm_client_modeset_probe(&fb_helper->client, width, height);
      ret = drm_fb_helper_single_fb_probe(fb_helper);
      if (ret < 0) {
diff --git a/include/drm/drm_device.h b/include/drm/drm_device.h
index 63767cf24371..619af597784c 100644
--- a/include/drm/drm_device.h
+++ b/include/drm/drm_device.h
@@ -316,6 +316,12 @@ struct drm_device {
       * Root directory for debugfs files.
       */
      struct dentry *debugfs_root;
+
+    /**
+     * @lid_closed: Flag to tell the lid switch state
+     */
+    bool lid_closed;
+
  };
  #endif
diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h
index 375737fd6c36..7fb36c10299d 100644
--- a/include/drm/drm_fb_helper.h
+++ b/include/drm/drm_fb_helper.h
@@ -143,6 +143,8 @@ struct drm_fb_helper {
      spinlock_t damage_lock;
      struct work_struct damage_work;
      struct work_struct resume_work;
+    struct work_struct lid_work;
+    struct workqueue_struct *input_wq;
      /**
       * @lock:



--
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Frankenstrasse 146, 90461 Nuernberg, Germany
GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman
HRB 36809 (AG Nuernberg)




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux