Re: [PATCH v10 1/6] dmaengine: Add API function dmaengine_prep_peripheral_dma_vec()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 05-06-24, 13:08, Paul Cercueil wrote:
> This function can be used to initiate a scatter-gather DMA transfer,
> where the address and size of each segment is located in one entry of
> the dma_vec array.
> 
> The major difference with dmaengine_prep_slave_sg() is that it supports
> specifying the lengths of each DMA transfer; as trying to override the
> length of the transfer with dmaengine_prep_slave_sg() is a very tedious
> process. The introduction of a new API function is also justified by the
> fact that scatterlists are on their way out.
> 
> Note that dmaengine_prep_interleaved_dma() is not helpful either in that
> case, as it assumes that the address of each segment will be higher than
> the one of the previous segment, which we just cannot guarantee in case
> of a scatter-gather transfer.

This looks good to me, but is missing Documentation changes for this
API, pls add that

> 
> Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> Signed-off-by: Nuno Sa <nuno.sa@xxxxxxxxxx>
> 
> ---
> v3: New patch
> 
> v5: Replace with function dmaengine_prep_slave_dma_vec(), and struct
>     'dma_vec'.
>     Note that at some point we will need to support cyclic transfers
>     using dmaengine_prep_slave_dma_vec(). Maybe with a new "flags"
>     parameter to the function?
> 
> v7:
>   - Renamed *device_prep_slave_dma_vec() -> device_prep_peripheral_dma_vec();
>   - Added a new flag parameter to the function as agreed between Paul
>     and Vinod. I renamed the first parameter to prep_flags as it's supposed to
>     be used (I think) with enum dma_ctrl_flags. I'm not really sure how that API
>     can grow but I was thinking in just having a bool cyclic parameter (as the
>     first intention of the flags is to support cyclic transfers) but ended up
>     "respecting" the previously agreed approach.
> 
> v10:
>   - Add kernel doc to dmaengine_prep_peripheral_dma_vec()
>   - Remove extra flags parameter
> ---
>  include/linux/dmaengine.h | 33 +++++++++++++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
> 
> diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
> index 752dbde4cec1..9fc03068cabc 100644
> --- a/include/linux/dmaengine.h
> +++ b/include/linux/dmaengine.h
> @@ -160,6 +160,16 @@ struct dma_interleaved_template {
>  	struct data_chunk sgl[];
>  };
>  
> +/**
> + * struct dma_vec - DMA vector
> + * @addr: Bus address of the start of the vector
> + * @len: Length in bytes of the DMA vector
> + */
> +struct dma_vec {
> +	dma_addr_t addr;
> +	size_t len;
> +};
> +
>  /**
>   * enum dma_ctrl_flags - DMA flags to augment operation preparation,
>   *  control completion, and communicate status.
> @@ -910,6 +920,10 @@ struct dma_device {
>  	struct dma_async_tx_descriptor *(*device_prep_dma_interrupt)(
>  		struct dma_chan *chan, unsigned long flags);
>  
> +	struct dma_async_tx_descriptor *(*device_prep_peripheral_dma_vec)(
> +		struct dma_chan *chan, const struct dma_vec *vecs,
> +		size_t nents, enum dma_transfer_direction direction,
> +		unsigned long flags);
>  	struct dma_async_tx_descriptor *(*device_prep_slave_sg)(
>  		struct dma_chan *chan, struct scatterlist *sgl,
>  		unsigned int sg_len, enum dma_transfer_direction direction,
> @@ -973,6 +987,25 @@ static inline struct dma_async_tx_descriptor *dmaengine_prep_slave_single(
>  						  dir, flags, NULL);
>  }
>  
> +/**
> + * dmaengine_prep_peripheral_dma_vec() - Prepare a DMA scatter-gather descriptor
> + * @chan: The channel to be used for this descriptor
> + * @vecs: The array of DMA vectors that should be transferred
> + * @nents: The number of DMA vectors in the array
> + * @dir: Specifies the direction of the data transfer
> + * @flags: DMA engine flags
> + */
> +static inline struct dma_async_tx_descriptor *dmaengine_prep_peripheral_dma_vec(
> +	struct dma_chan *chan, const struct dma_vec *vecs, size_t nents,
> +	enum dma_transfer_direction dir, unsigned long flags)
> +{
> +	if (!chan || !chan->device || !chan->device->device_prep_peripheral_dma_vec)
> +		return NULL;
> +
> +	return chan->device->device_prep_peripheral_dma_vec(chan, vecs, nents,
> +							    dir, flags);
> +}
> +
>  static inline struct dma_async_tx_descriptor *dmaengine_prep_slave_sg(
>  	struct dma_chan *chan, struct scatterlist *sgl,	unsigned int sg_len,
>  	enum dma_transfer_direction dir, unsigned long flags)
> -- 
> 2.43.0

-- 
~Vinod



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux