[PATCH 04/17] backlight: corgi-lcd: Use backlight power constants

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality.

Only change the driver's backlight device, but leave the LCD
device as-is.

Signed-off-by: Thomas Zimmermann <tzimmermann@xxxxxxx>
---
 drivers/video/backlight/corgi_lcd.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/video/backlight/corgi_lcd.c b/drivers/video/backlight/corgi_lcd.c
index aad1680c9075d..b29ee8579b57e 100644
--- a/drivers/video/backlight/corgi_lcd.c
+++ b/drivers/video/backlight/corgi_lcd.c
@@ -526,7 +526,7 @@ static int corgi_lcd_probe(struct spi_device *spi)
 		return PTR_ERR(lcd->bl_dev);
 
 	lcd->bl_dev->props.brightness = pdata->default_intensity;
-	lcd->bl_dev->props.power = FB_BLANK_UNBLANK;
+	lcd->bl_dev->props.power = BL_CORE_UNBLANK;
 
 	ret = setup_gpio_backlight(lcd, pdata);
 	if (ret)
@@ -547,7 +547,7 @@ static void corgi_lcd_remove(struct spi_device *spi)
 {
 	struct corgi_lcd *lcd = spi_get_drvdata(spi);
 
-	lcd->bl_dev->props.power = FB_BLANK_UNBLANK;
+	lcd->bl_dev->props.power = BL_CORE_UNBLANK;
 	lcd->bl_dev->props.brightness = 0;
 	backlight_update_status(lcd->bl_dev);
 	corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_POWERDOWN);
-- 
2.45.2




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux