Am Mittwoch, 5. Juni 2024, 21:58:23 CEST schrieb Luis de Arquer: > On 6/5/24 16:48, Heiko Stübner wrote: > > Without this change, connecting to a DVI display does not work, and > > reading the EDID ends in the "i2c read error" below. > > I had a lot of problems initially with the vendor driver on my DVI > display, and am aware that several changes were required. > > However, I tested Cristian patch and worked fine. All modes were > apparently detected from the display and they all worked. But maybe I > was just lucky and it was using a somehow cached table, I can't say. > > This is an AOC DVI display from 2011 with a passive adapter. For me it is an LG IPS235. On its native hdmi input I always get regular 1080p output. But on its DVI input I always ran into the i2c read error before adding that change. I guess I should determine which reads actually fail.
