On Sun, May 26, 2024 at 7:06 PM Mikhail Gavrilov <mikhail.v.gavrilov@xxxxxxxxx> wrote: > > Hi, > Day before yesterday I replaced 7900XTX to 6900XT for got clear in > which kernel first time appeared warning message "DMA-API: amdgpu > 0000:0f:00.0: cacheline tracking EEXIST, overlapping mappings aren't > supported". > The kernel 6.3 and older won't boot on a computer with Radeon 7900XTX. > When I booted the system with 6900XT I saw a green flashing bar on top > of the screen when I typed commands in the gnome terminal which was > maximized on full screen. > Demonstration: https://youtu.be/tTvwQ_5pRkk > For reproduction you need Radeon 6900XT GPU connected to 120Hz OLED TV by HDMI. > > I bisected the issue and the first commit which I found was 6d4279cb99ac. > commit 6d4279cb99ac4f51d10409501d29969f687ac8dc (HEAD) > Author: Rodrigo Siqueira <Rodrigo.Siqueira@xxxxxxx> > Date: Tue Mar 26 10:42:05 2024 -0600 > > drm/amd/display: Drop legacy code > > This commit removes code that are not used by display anymore. > > Acked-by: Hamza Mahfooz <hamza.mahfooz@xxxxxxx> > Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@xxxxxxx> > Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx> > > drivers/gpu/drm/amd/display/dc/inc/hw/stream_encoder.h | 4 ---- > drivers/gpu/drm/amd/display/dc/inc/resource.h | 7 ------- > drivers/gpu/drm/amd/display/dc/optc/dcn20/dcn20_optc.c | 10 ---------- > drivers/gpu/drm/amd/display/dc/resource/dcn21/dcn21_resource.c | 33 > +-------------------------------- > 4 files changed, 1 insertion(+), 53 deletions(-) > > Every time after bisecting I usually make sure that I found the right > commit and build the kernel with revert of the bad commit. > But this time I again observed an issue after running a kernel builded > without commit 6d4279cb99ac. > And I decided to find a second bad commit. > The second bad commit has been bc87d666c05. > commit bc87d666c05a13e6d4ae1ddce41fc43d2567b9a2 (HEAD) > Author: Rodrigo Siqueira <Rodrigo.Siqueira@xxxxxxx> > Date: Tue Mar 26 11:55:19 2024 -0600 > > drm/amd/display: Add fallback configuration for set DRR in DCN10 > > Set OTG/OPTC parameters to 0 if something goes wrong on DCN10. > > Acked-by: Hamza Mahfooz <hamza.mahfooz@xxxxxxx> > Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@xxxxxxx> > Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx> > > drivers/gpu/drm/amd/display/dc/optc/dcn10/dcn10_optc.c | 15 ++++++++++++--- > 1 file changed, 12 insertions(+), 3 deletions(-) > > After reverting both these commits on top of 54f71b0369c9 the issue is gone. > > I also attach the build config. > > My hardware specs: https://linux-hardware.org/?probe=f25a873c5e > > Rodrigo or anyone else from the AMD team can you look please. > Did anyone watch? -- Best Regards, Mike Gavrilov.
