[PATCH v3 00/24] drm/panel: Remove most store/double-check of prepared/enabled state

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



As talked about in commit d2aacaf07395 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.

This series attempts to do just that. While the original grep, AKA:
  git grep 'if.*>prepared' -- drivers/gpu/drm/panel
  git grep 'if.*>enabled' -- drivers/gpu/drm/panel
...still produces a few hits after my series, they are _mostly_ all
gone. The ones that are left are less trivial to fix.

One of the main reasons that many panels probably needed to store and
double-check their prepared/enabled appears to have been to handle
shutdown and/or remove. Panels drivers often wanted to force the power
off for panels in these cases and this was a good reason for the
double-check.

In response to my V1 series [1] we had much discussion of what to
do. The conclusion was that as long as DRM modeset drivers properly
called drm_atomic_helper_shutdown() that we should be able to remove
the explicit shutdown/remove handling in the panel drivers. Most of
the patches to improve DRM modeset drivers [2] [3] [4] have now
landed.

In contrast to my V1 series, I broke the V2 series up a lot
more. Since a few of the panel drivers in V1 already landed, we had
fewer total drivers and so we could devote a patch to each panel.
Also, since we were now relying on DRM modeset drivers I felt like we
should split the patches for each panel into two: one that's
definitely safe and one that could be reverted if we found a
problematic DRM modeset driver that we couldn't fix.

Many of the patches in the V2 series [5] landed, so this V3 series is
the patches that are left plus one new bonus patch. At this point, we
may want to just land the patches that are left since it seems like
nobody is going to test/review them and they've all been Acked by
Linus and Maxime.

NOTE: this touches _a lot_ of drivers, is repetitive, and is not
really possible to generate automatically. That means it's entirely
possible that my eyes glazed over and I did something wrong. Please
double-check me and don't assume that I got everything perfect, though
I did my best. I have at least confirmed that "allmodconfig" for arm64
doesn't fall on its face with this series. I haven't done a ton of
other testing.

[1] https://lore.kernel.org/r/20230804140605.RFC.4.I930069a32baab6faf46d6b234f89613b5cec0f14@changeid
[2] https://lore.kernel.org/r/20230901234015.566018-1-dianders@xxxxxxxxxxxx
[3] https://lore.kernel.org/r/20230901234202.566951-1-dianders@xxxxxxxxxxxx
[4] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@xxxxxxxxxxxx
[5] https://lore.kernel.org/r/20240503213441.177109-1-dianders@xxxxxxxxxxxx/

Changes in v3:
- drm/panel: Avoid warnings w/ panel-simple/panel-edp at shutdown

Changes in v2:
- Only handle 1 panel per patch.
- Split removal of prepared/enabled from handling of remove/shutdown.

Douglas Anderson (24):
  drm/panel: boe-himax8279d: Stop tracking prepared/enabled
  drm/panel: boe-himax8279d: Don't call unprepare+disable at
    shutdown/remove
  drm/panel: khadas-ts050: Stop tracking prepared/enabled
  drm/panel: khadas-ts050: Don't call unprepare+disable at
    shutdown/remove
  drm/panel: olimex-lcd-olinuxino: Stop tracking prepared/enabled
  drm/panel: olimex-lcd-olinuxino: Don't call unprepare+disable at
    remove
  drm/panel: osd-osd101t2587-53ts: Stop tracking prepared/enabled
  drm/panel: osd-osd101t2587-53ts: Don't call unprepare+disable at
    shutdown/remove
  drm/panel: tdo-tl070wsh30: Stop tracking prepared
  drm/panel: tdo-tl070wsh30: Don't call unprepare+disable at
    shutdown/remove
  drm/panel: jdi-lt070me05000: Stop tracking prepared/enabled
  drm/panel: jdi-lt070me05000: Don't call disable at shutdown/remove
  drm/panel: panasonic-vvx10f034n00: Stop tracking prepared/enabled
  drm/panel: panasonic-vvx10f034n00: Don't call disable at
    shutdown/remove
  drm/panel: seiko-43wvf1g: Stop tracking prepared/enabled
  drm/panel: seiko-43wvf1g: Don't call disable at shutdown/remove
  drm/panel: sharp-lq101r1sx01: Stop tracking prepared/enabled
  drm/panel: sharp-lq101r1sx01: Don't call disable at shutdown/remove
  drm/panel: sharp-ls043t1le01: Stop tracking prepared
  drm/panel: sharp-ls043t1le01: Don't call disable at shutdown/remove
  drm/panel: raydium-rm67191: Stop tracking enabled
  drm/panel: raydium-rm67191: Don't call unprepare+disable at shutdown
  drm/panel: Update TODO list item for cleaning up prepared/enabled
    tracking
  drm/panel: Avoid warnings w/ panel-simple/panel-edp at shutdown

 Documentation/gpu/todo.rst                    |  47 +++---
 drivers/gpu/drm/drm_panel.c                   |  12 ++
 drivers/gpu/drm/panel/panel-boe-himax8279d.c  |  40 -----
 .../gpu/drm/panel/panel-drm-shutdown-check.h  | 151 ++++++++++++++++++
 drivers/gpu/drm/panel/panel-edp.c             |  19 +--
 .../gpu/drm/panel/panel-jdi-lt070me05000.c    |  35 ----
 drivers/gpu/drm/panel/panel-khadas-ts050.c    |  39 -----
 .../drm/panel/panel-olimex-lcd-olinuxino.c    |  44 -----
 .../drm/panel/panel-osd-osd101t2587-53ts.c    |  41 +----
 .../drm/panel/panel-panasonic-vvx10f034n00.c  |  47 +-----
 drivers/gpu/drm/panel/panel-raydium-rm67191.c |  26 ---
 drivers/gpu/drm/panel/panel-seiko-43wvf1g.c   |  49 ------
 .../gpu/drm/panel/panel-sharp-lq101r1sx01.c   |  63 +-------
 .../gpu/drm/panel/panel-sharp-ls043t1le01.c   |  24 ---
 drivers/gpu/drm/panel/panel-simple.c          |  19 +--
 drivers/gpu/drm/panel/panel-tdo-tl070wsh30.c  |  23 ---
 16 files changed, 199 insertions(+), 480 deletions(-)
 create mode 100644 drivers/gpu/drm/panel/panel-drm-shutdown-check.h

-- 
2.45.1.288.g0e0cd299f1-goog




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux