Re: [PATCH v4 05/13] drm/msm/dpu: move scaling limitations out of the hw_catalog

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 31 May 2024 at 04:02, Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx> wrote:
>
>
>
> On 3/13/2024 5:02 PM, Dmitry Baryshkov wrote:
> > Max upscale / downscale factors are constant between platforms. In
> > preparation to adding support for virtual planes and allocating SSPP
> > blocks on demand move max scaling factors out of the HW catalog and
> > handle them in the dpu_plane directly. If any of the scaling blocks gets
> > different limitations, this will have to be handled separately, after
> > the plane refactoring.
> >
> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> > ---
> >   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 12 ------------
> >   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h |  4 ----
> >   drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c      | 16 +++++++++++++---
> >   3 files changed, 13 insertions(+), 19 deletions(-)
> >
>
> <Snip>
>
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> > index 70d6a8989e1a..6360052523b5 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> > @@ -785,12 +785,15 @@ static int dpu_plane_atomic_check_pipe(struct dpu_plane *pdpu,
> >       return 0;
> >   }
> >
> > +#define MAX_UPSCALE_RATIO    20
> > +#define MAX_DOWNSCALE_RATIO  4
> > +
> >   static int dpu_plane_atomic_check(struct drm_plane *plane,
> >                                 struct drm_atomic_state *state)
> >   {
> >       struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state,
> >                                                                                plane);
> > -     int ret = 0, min_scale;
> > +     int ret = 0, min_scale, max_scale;
> >       struct dpu_plane *pdpu = to_dpu_plane(plane);
> >       struct dpu_kms *kms = _dpu_plane_get_kms(&pdpu->base);
> >       u64 max_mdp_clk_rate = kms->perf.max_core_clk_rate;
> > @@ -822,10 +825,17 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
> >       pipe_hw_caps = pipe->sspp->cap;
> >       sblk = pipe->sspp->cap->sblk;
> >
> > -     min_scale = FRAC_16_16(1, sblk->maxupscale);
> > +     if (sblk->scaler_blk.len) {
> > +             min_scale = FRAC_16_16(1, MAX_UPSCALE_RATIO);
> > +             max_scale = MAX_DOWNSCALE_RATIO << 16;
> > +     } else {
> > +             min_scale = 1 << 16;
> > +             max_scale = 1 << 16;
>
> You can use DRM_PLANE_NO_SCALING instead.

Ack

>
> > +     }
> > +
> >       ret = drm_atomic_helper_check_plane_state(new_plane_state, crtc_state,
> >                                                 min_scale,
> > -                                               sblk->maxdwnscale << 16,
> > +                                               max_scale,
> >                                                 true, true);
>
> I am missing something here.
>
> As per the documentation of this API, min and max are the scaling limits
> of both directions and not max_upscale and max_downscale.
>
> **
> 837  * drm_atomic_helper_check_plane_state() - Check plane state for
> validity
> 838  * @plane_state: plane state to check
> 839  * @crtc_state: CRTC state to check
> 840  * @min_scale: minimum @src:@dest scaling factor in 16.16 fixed point
> 841  * @max_scale: maximum @src:@dest scaling factor in 16.16 fixed point
> 842  * @can_position: is it legal to position the plane such that it
>
>
> But this change is passing max_upscale and max_downscale as the min and
> max resp. Isnt that wrong?

First of all, please notice that I'm not changing the values that are
passed to the function. What was being passed beforehand gets passed
after this commit. I just moved it out of the catalog.

Second, if we take a look at drm_calc_scale(), we can see that it
calculates src / dst and checks that it is within the min_scale and
max_scale boundaries, just like documented.
In our case, the boundaries are (I'm omitting 16.16 math):
- upscale 20 times. dst = 20 * src, scale = src/dst = 1/20
- downscale 4 times. dst = 1/4 * src, scale = src/dst = 4

So, from the point of view of drm_calc_scale(), the min_scale is
1/MAX_UPSCALE, max_scale = MAX_DOWNSCALE and the values the code is
passing are correct.

>
>
> >       if (ret) {
> >               DPU_DEBUG_PLANE(pdpu, "Check plane state failed (%d)\n", ret);



-- 
With best wishes
Dmitry



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux