Re: [PATCH v2 2/3] drm/panel: sitronix-st7789v: tweak timing for jt240mhqs_hwt_ek_e3 panel

[Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>]

On 5/29/2024 7:42 AM, Gerald Loacker wrote:
> Use the default timing parameters to get a refresh rate of about 60 Hz for
> a clock of 6 MHz.
>
> Fixes: 0fbbe96bfa08 ("drm/panel: sitronix-st7789v: add jasonic jt240mhqs-hwt-ek-e3 support")
> Signed-off-by: Gerald Loacker <gerald.loacker@xxxxxxxxxxxxxx>

Hi Gerald,

Acked-by: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>

Thanks,

Jessica Zhang

> ---
>   drivers/gpu/drm/panel/panel-sitronix-st7789v.c | 6 +++---
>   1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
> index 32e5c0348038..c7e3f1280404 100644
> --- a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
> +++ b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
> @@ -282,9 +282,9 @@ static const struct drm_display_mode et028013dma_mode = {
>   static const struct drm_display_mode jt240mhqs_hwt_ek_e3_mode = {
>   	.clock = 6000,
>   	.hdisplay = 240,
> -	.hsync_start = 240 + 28,
> -	.hsync_end = 240 + 28 + 10,
> -	.htotal = 240 + 28 + 10 + 10,
> +	.hsync_start = 240 + 38,
> +	.hsync_end = 240 + 38 + 10,
> +	.htotal = 240 + 38 + 10 + 10,
>   	.vdisplay = 280,
>   	.vsync_start = 280 + 48,
>   	.vsync_end = 280 + 48 + 4,
>
> --
> 2.37.2