On Mon, May 27, 2024 at 12:54 PM Fei Shao <fshao@xxxxxxxxxxxx> wrote:
>
> On Mon, May 27, 2024 at 12:38 PM Chen-Yu Tsai <wens@xxxxxxxxxx> wrote:
> >
> > On Mon, May 27, 2024 at 12:34 PM Fei Shao <fshao@xxxxxxxxxxxx> wrote:
> > >
> > > Hi Shawn,
> > >
> > > On Thu, May 2, 2024 at 6:39 PM Shawn Sung <shawn.sung@xxxxxxxxxxxx> wrote:
> > > >
> > > > From: Hsiao Chien Sung <shawn.sung@xxxxxxxxxxxx>
> > > >
> > > > Set DRM mode configs limitation according to the hardware capabilities
> > > > and pass the IGT checks as below:
> > > >
> > > > - The test "graphics.IgtKms.kms_plane" requires a frame buffer with
> > > > width of 4512 pixels (> 4096).
> > > > - The test "graphics.IgtKms.kms_cursor_crc" checks if the cursor size is
> > > > defined, and run the test with cursor size from 1x1 to 512x512.
> > > >
> > > > Please notice that the test conditions may change as IGT is updated.
> > > >
> > > > Signed-off-by: Hsiao Chien Sung <shawn.sung@xxxxxxxxxxxx>
> > > > ---
> > > > drivers/gpu/drm/mediatek/mtk_drm_drv.c | 22 ++++++++++++++++++++++
> > > > drivers/gpu/drm/mediatek/mtk_drm_drv.h | 4 ++++
> > > > 2 files changed, 26 insertions(+)
> > > >
> > > > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> > > > index 8e047043202b4..c9cad3a827376 100644
> > > > --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> > > > +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> > > > @@ -294,6 +294,9 @@ static const struct mtk_mmsys_driver_data mt8188_vdosys0_driver_data = {
> > > > .conn_routes = mt8188_mtk_ddp_main_routes,
> > > > .num_conn_routes = ARRAY_SIZE(mt8188_mtk_ddp_main_routes),
> > > > .mmsys_dev_num = 2,
> > > > + .max_width = 8191,
> > > > + .min_width = 1,
> > > > + .min_height = 1,
> > > > };
> > > >
> > > > static const struct mtk_mmsys_driver_data mt8192_mmsys_driver_data = {
> > > > @@ -308,6 +311,9 @@ static const struct mtk_mmsys_driver_data mt8195_vdosys0_driver_data = {
> > > > .main_path = mt8195_mtk_ddp_main,
> > > > .main_len = ARRAY_SIZE(mt8195_mtk_ddp_main),
> > > > .mmsys_dev_num = 2,
> > > > + .max_width = 8191,
> > > > + .min_width = 1,
> > > > + .min_height = 1,
> > > > };
> > > >
> > > > static const struct mtk_mmsys_driver_data mt8195_vdosys1_driver_data = {
> > > > @@ -315,6 +321,9 @@ static const struct mtk_mmsys_driver_data mt8195_vdosys1_driver_data = {
> > > > .ext_len = ARRAY_SIZE(mt8195_mtk_ddp_ext),
> > > > .mmsys_id = 1,
> > > > .mmsys_dev_num = 2,
> > > > + .max_width = 8191,
> > > > + .min_width = 2, /* 2-pixel align when ethdr is bypassed */
> > > > + .min_height = 1,
> > > > };
> > > >
> > > > static const struct of_device_id mtk_drm_of_ids[] = {
> > > > @@ -493,6 +502,15 @@ static int mtk_drm_kms_init(struct drm_device *drm)
> > > > for (j = 0; j < private->data->mmsys_dev_num; j++) {
> > > > priv_n = private->all_drm_private[j];
> > > >
> > > > + if (priv_n->data->max_width)
> > > > + drm->mode_config.max_width = priv_n->data->max_width;
> > > > +
> > > > + if (priv_n->data->min_width)
> > > > + drm->mode_config.min_width = priv_n->data->min_width;
> > > > +
> > > > + if (priv_n->data->min_height)
> > > > + drm->mode_config.min_height = priv_n->data->min_height;
> > > > +
> > > > if (i == CRTC_MAIN && priv_n->data->main_len) {
> > > > ret = mtk_crtc_create(drm, priv_n->data->main_path,
> > > > priv_n->data->main_len, j,
> > > > @@ -520,6 +538,10 @@ static int mtk_drm_kms_init(struct drm_device *drm)
> > > > }
> > > > }
> > > >
> > > > + /* IGT will check if the cursor size is configured */
> > > > + drm->mode_config.cursor_width = drm->mode_config.max_width;
> > > > + drm->mode_config.cursor_height = drm->mode_config.max_height;
> > >
> > > I think you shouldn't set the cursor size to the maximum plane size.
> > > As you mentioned in the commit message, IGT tests the cursor sizes
> > > from 1x1 to 512x512, so just setting them to 512 (with a macro) should
> > > be enough.
> > >
> > > Currently this tells the userspace "the supported cursor plane size is
> > > up to 4096x8191" on MT8195 and MT8188.
> > > That means the userspace may allocate a buffer with 4096*8191*4 ~=
> > > 128MB for the cursor plane in the worst case, and most of the buffer
> > > will be wasted.
> > > Note that the default value for DRM_CAP_CURSOR_WIDTH is 64.
> > >
> > > In practice, when applying this on the MT8188 Chromebook, I see the
> > > userspace allocates two 64MB buffers for the cursor plane.
> > > But if I limit the cursor size to 512, the userspace only allocates
> > > two 1MB buffers i.e. 126MB is optimized for the DMA buffer allocation.
> >
> > That seems more like an issue of ChromeOS not doing the most optimal
> > thing though?
>
> I agree that we need to fix this on the ChromeOS side too, but I still
> think the driver doesn't need to set the capabilities like this
> because a full-screen size cursor is not practical anyway.
> The default cursor plane size is just 64x64.
Seems like a better solution was merged:
https://patchwork.freedesktop.org/patch/583298/
ChenYu
> Regard,
> Fei
>
>
>
> >
> > > Regards,
> > > Fei
> > >
> > >
> > > >
> > > > +
> > > > /* Use OVL device for all DMA memory allocations */
> > > > crtc = drm_crtc_from_index(drm, 0);
> > > > if (crtc)
> > > > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.h b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
> > > > index 78d698ede1bf8..6cfa790e8df5c 100644
> > > > --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.h
> > > > +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
> > > > @@ -46,6 +46,10 @@ struct mtk_mmsys_driver_data {
> > > > bool shadow_register;
> > > > unsigned int mmsys_id;
> > > > unsigned int mmsys_dev_num;
> > > > +
> > > > + int max_width;
> > > > + int min_width;
> > > > + int min_height;
> > > > };
> > > >
> > > > struct mtk_drm_private {
> > > > --
> > > > 2.18.0
> > > >
