From: Jonathan Marek <jonathan@xxxxxxxx> Make it clear why the pkt_per_line value is being "divided by 2". Signed-off-by: Jonathan Marek <jonathan@xxxxxxxx> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> Signed-off-by: Jun Nie <jun.nie@xxxxxxxxxx> --- drivers/gpu/drm/msm/dsi/dsi_host.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c index 7252d36687e6..4768cff08381 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_host.c +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c @@ -885,7 +885,11 @@ static void dsi_update_dsc_timing(struct msm_dsi_host *msm_host, bool is_cmd_mod /* DSI_VIDEO_COMPRESSION_MODE & DSI_COMMAND_COMPRESSION_MODE * registers have similar offsets, so for below common code use * DSI_VIDEO_COMPRESSION_MODE_XXXX for setting bits + * + * pkt_per_line is log2 encoded, >>1 works for supported values (1,2,4) */ + if (pkt_per_line > 4) + drm_warn_once(msm_host->dev, "pkt_per_line too big"); reg |= DSI_VIDEO_COMPRESSION_MODE_CTRL_PKT_PER_LINE(pkt_per_line >> 1); reg |= DSI_VIDEO_COMPRESSION_MODE_CTRL_EOL_BYTE_NUM(eol_byte_num); reg |= DSI_VIDEO_COMPRESSION_MODE_CTRL_EN; -- 2.34.1
