Re: [PATCH v4 1/5] clk: sunxi-ng: common: Support minimum and maximum rate

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Måns,

21.05.2024 15:43:10 Måns Rullgård <mans@xxxxxxxxx>:

> Frank Oltmanns <frank@xxxxxxxxxxxx> writes:
>
>> The Allwinner SoC's typically have an upper and lower limit for their
>> clocks' rates. Up until now, support for that has been implemented
>> separately for each clock type.
>>
>> Implement that functionality in the sunxi-ng's common part making use of
>> the CCF rate liming capabilities, so that it is available for all clock
>> types.
>>
>> Suggested-by: Maxime Ripard <mripard@xxxxxxxxxx>
>> Signed-off-by: Frank Oltmanns <frank@xxxxxxxxxxxx>
>> Cc: stable@xxxxxxxxxxxxxxx
>> ---
>> drivers/clk/sunxi-ng/ccu_common.c | 19 +++++++++++++++++++
>> drivers/clk/sunxi-ng/ccu_common.h |  3 +++
>> 2 files changed, 22 insertions(+)
>
> This just landed in 6.6 stable, and it broke HDMI output on an A20 based
> device, the clocks ending up all wrong as seen in this diff of
> /sys/kernel/debug/clk/clk_summary:
>
> @@ -70,16 +71,14 @@
>            apb1-i2c0                  0       0        0        24000000    0  
>                                                                                
>         pll-gpu                       0       0        0        1200000000  0  
> -       pll-video1                    3       3        1        159000000   0  
> +       pll-video1                    2       2        1        159000000   0  
>            hdmi                       1       1        0        39750000    0  
>                                                                                
>            tcon0-ch1-sclk2            1       1        1        39750000    0  
>               tcon0-ch1-sclk1         1       1        1        39750000    0  
>                                                                                
> -          pll-video1-2x              1       1        0        318000000   0  
> +          pll-video1-2x              0       0        0        318000000   0  
>                                                                                
> -             hdmi-tmds               2       2        0        39750000    0  
> -                hdmi-ddc             1       1        0        1987500     0  
>         pll-periph-base               2       2        0        1200000000  0  
>            mbus                       1       1        0        300000000   0  
>            pll-periph-sata            0       0        0        100000000   0  
> @@ -199,7 +198,7 @@
>                                                                                
>            ace                        0       0        0        384000000   0  
>            ve                         0       0        0        384000000   0  
> -       pll-video0                    4       4        2        297000000   0  
> +       pll-video0                    5       5        2        297000000   0  
>            hdmi1                      0       0        0        297000000   0  
>            tcon1-ch1-sclk2            0       0        0        297000000   0  
>               tcon1-ch1-sclk1         0       0        0        297000000   0  
> @@ -222,8 +221,10 @@
>                                                                                
>            de-be0                     1       1        1        297000000   0  
>                                                                                
> -          pll-video0-2x              0       0        0        594000000   0  
> +          pll-video0-2x              1       1        0        594000000   0  
>                                                                                
> +             hdmi-tmds               2       2        0        594000000   0  
> +                hdmi-ddc             1       1        0        29700000    0  
>         pll-audio-base                0       0        0        1500000     0  
>            pll-audio-8x               0       0        0        3000000     0  
>               i2s2                    0       0        0        3000000     0  
>
> Reverting this commit makes it work again.

Thank you for your detailed report!

I've had a first look at hdmi-tmds and hdmi-ddc, and neither seems to be calling ccu_is_better_rate() in their determine_rate() functions. Their parents have the exact same rates in your diff, so, my current working assumption is that they can't be the cause either.

I'll have a more detailed look over the weekend. Until then, if anyone has some ideas where I should have a look next, please share your thoughts.

Best regards,
  Frank

>
>> diff --git a/drivers/clk/sunxi-ng/ccu_common.c b/drivers/clk/sunxi-ng/ccu_common.c
>> index 8babce55302f..ac0091b4ce24 100644
>> --- a/drivers/clk/sunxi-ng/ccu_common.c
>> +++ b/drivers/clk/sunxi-ng/ccu_common.c
>> @@ -44,6 +44,16 @@ bool ccu_is_better_rate(struct ccu_common *common,
>>             unsigned long current_rate,
>>             unsigned long best_rate)
>> {
>> +   unsigned long min_rate, max_rate;
>> +
>> +   clk_hw_get_rate_range(&common->hw, &min_rate, &max_rate);
>> +
>> +   if (current_rate > max_rate)
>> +       return false;
>> +
>> +   if (current_rate < min_rate)
>> +       return false;
>> +
>>     if (common->features & CCU_FEATURE_CLOSEST_RATE)
>>         return abs(current_rate - target_rate) < abs(best_rate - target_rate);
>>
>> @@ -122,6 +132,7 @@ static int sunxi_ccu_probe(struct sunxi_ccu *ccu, struct device *dev,
>>
>>     for (i = 0; i < desc->hw_clks->num ; i++) {
>>         struct clk_hw *hw = desc->hw_clks->hws[i];
>> +       struct ccu_common *common = hw_to_ccu_common(hw);
>>         const char *name;
>>
>>         if (!hw)
>> @@ -136,6 +147,14 @@ static int sunxi_ccu_probe(struct sunxi_ccu *ccu, struct device *dev,
>>             pr_err("Couldn't register clock %d - %s\n", i, name);
>>             goto err_clk_unreg;
>>         }
>> +
>> +       if (common->max_rate)
>> +           clk_hw_set_rate_range(hw, common->min_rate,
>> +                         common->max_rate);
>> +       else
>> +           WARN(common->min_rate,
>> +                "No max_rate, ignoring min_rate of clock %d - %s\n",
>> +                i, name);
>>     }
>>
>>     ret = of_clk_add_hw_provider(node, of_clk_hw_onecell_get,
>> diff --git a/drivers/clk/sunxi-ng/ccu_common.h b/drivers/clk/sunxi-ng/ccu_common.h
>> index 942a72c09437..329734f8cf42 100644
>> --- a/drivers/clk/sunxi-ng/ccu_common.h
>> +++ b/drivers/clk/sunxi-ng/ccu_common.h
>> @@ -31,6 +31,9 @@ struct ccu_common {
>>     u16     lock_reg;
>>     u32     prediv;
>>
>> +   unsigned long   min_rate;
>> +   unsigned long   max_rate;
>> +
>>     unsigned long   features;
>>     spinlock_t  *lock;
>>     struct clk_hw   hw;
>>
>> --
>>
>> 2.44.0
>>
>
> --
> Måns Rullgård





[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux