On Mon, 20 May 2024 at 14:11, Sui Jingfeng <sui.jingfeng@xxxxxxxxx> wrote:
>
> Hi,
>
> On 5/20/24 06:11, Dmitry Baryshkov wrote:
> > On Thu, May 16, 2024 at 06:10:06PM +0800, Liu Ying wrote:
> >> Commit f3d9683346d6 ("drm/bridge: adv7511: Allow IRQ to share GPIO pins")
> >> fails to consider the case where adv7511->i2c_main->irq is zero, i.e.,
> >> no interrupt requested at all.
> >>
> >> Without interrupt, adv7511_wait_for_edid() could return -EIO sometimes,
> >> because it polls adv7511->edid_read flag by calling adv7511_irq_process()
> >> a few times, but adv7511_irq_process() happens to refuse to handle
> >> interrupt by returning -ENODATA. Hence, EDID retrieval fails randomly.
> >>
> >> Fix the issue by checking adv7511->i2c_main->irq before exiting interrupt
> >> handling from adv7511_irq_process().
> >>
> >> Fixes: f3d9683346d6 ("drm/bridge: adv7511: Allow IRQ to share GPIO pins")
> >> Signed-off-by: Liu Ying <victor.liu@xxxxxxx>
> >> ---
> >> drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 3 ++-
> >> 1 file changed, 2 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> >> index 6089b0bb9321..2074fa3c1b7b 100644
> >> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> >> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> >> @@ -479,7 +479,8 @@ static int adv7511_irq_process(struct adv7511 *adv7511, bool process_hpd)
> >> return ret;
> >>
> >> /* If there is no IRQ to handle, exit indicating no IRQ data */
> >> - if (!(irq0 & (ADV7511_INT0_HPD | ADV7511_INT0_EDID_READY)) &&
> >> + if (adv7511->i2c_main->irq &&
> >> + !(irq0 & (ADV7511_INT0_HPD | ADV7511_INT0_EDID_READY)) &&
> >> !(irq1 & ADV7511_INT1_DDC_ERROR))
> >> return -ENODATA;
> >
> > I think it might be better to handle -ENODATA in adv7511_wait_for_edid()
> > instead. WDYT?
> >
>
> I think this is may deserve another patch.
My point is that the IRQ handler is fine to remove -ENODATA here,
there is no pending IRQ that can be handled. So instead of continuing
the execution when we know that IRQ bits are not set, it's better to
ignore -ENODATA in the calling code and go on with msleep().
--
With best wishes
Dmitry
