The mipi_dsi_dcs_nop() function returns an error but we weren't checking it in hx83102_prepare(). Add a check. This is highly unlikely to matter in practice. If the NOP failed then likely later MIPI commands would fail too. Found by code inspection. Fixes: 0ef94554dc40 ("drm/panel: himax-hx83102: Break out as separate driver") Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx> --- drivers/gpu/drm/panel/panel-himax-hx83102.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/panel/panel-himax-hx83102.c b/drivers/gpu/drm/panel/panel-himax-hx83102.c index 4ac7f9d8b232..1ba623e41924 100644 --- a/drivers/gpu/drm/panel/panel-himax-hx83102.c +++ b/drivers/gpu/drm/panel/panel-himax-hx83102.c @@ -547,7 +547,11 @@ static int hx83102_prepare(struct drm_panel *panel) usleep_range(10000, 11000); - mipi_dsi_dcs_nop(ctx->dsi); + ret = mipi_dsi_dcs_nop(ctx->dsi); + if (ret < 0) { + dev_err(dev, "Failed to send NOP: %d\n", ret); + goto poweroff; + } usleep_range(1000, 2000); gpiod_set_value(ctx->enable_gpio, 1); -- 2.45.0.rc1.225.g2a3ae87e7f-goog