Re: [PATCH] drm/msm/adreno: De-spaghettify the use of memory barriers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, May 16, 2024 at 08:15:34AM -0500, Andrew Halaney wrote:
> On Wed, May 15, 2024 at 12:08:49AM GMT, Akhil P Oommen wrote:
> > On Wed, May 08, 2024 at 07:46:31PM +0200, Konrad Dybcio wrote:
> > > Memory barriers help ensure instruction ordering, NOT time and order
> > > of actual write arrival at other observers (e.g. memory-mapped IP).
> > > On architectures employing weak memory ordering, the latter can be a
> > > giant pain point, and it has been as part of this driver.
> > > 
> > > Moreover, the gpu_/gmu_ accessors already use non-relaxed versions of
> > > readl/writel, which include r/w (respectively) barriers.
> > > 
> > > Replace the barriers with a readback that ensures the previous writes
> > > have exited the write buffer (as the CPU must flush the write to the
> > > register it's trying to read back) and subsequently remove the hack
> > > introduced in commit b77532803d11 ("drm/msm/a6xx: Poll for GBIF unhalt
> > > status in hw_init").
> 
> For what its worth, I've been eyeing (but haven't tested) sending some
> patches to clean up dsi_phy_write_udelay/ndelay(). There's no ordering
> guarantee between a writel() and a delay(), so the expected "write then
> delay" sequence might not be happening.. you need to write, read, delay.
> 
> memory-barriers.txt:
> 
> 	5. A readX() by a CPU thread from the peripheral will complete before
> 	   any subsequent delay() loop can begin execution on the same thread.
> 	   This ensures that two MMIO register writes by the CPU to a peripheral
> 	   will arrive at least 1us apart if the first write is immediately read
> 	   back with readX() and udelay(1) is called prior to the second
> 	   writeX():
> 
> 		writel(42, DEVICE_REGISTER_0); // Arrives at the device...
> 		readl(DEVICE_REGISTER_0);
> 		udelay(1);
> 		writel(42, DEVICE_REGISTER_1); // ...at least 1us before this.

Yes, udelay orders only with readl(). I saw a patch from Will Deacon
which fixes this for arm64 few years back:
https://lore.kernel.org/all/1543251228-30001-1-git-send-email-will.deacon@xxxxxxx/T/

But this is needed only when you write io and do cpuside wait , not when
you poll io to check status.

> 
> > > 
> > > Fixes: b77532803d11 ("drm/msm/a6xx: Poll for GBIF unhalt status in hw_init")
> > > Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> > > ---
> > >  drivers/gpu/drm/msm/adreno/a6xx_gmu.c |  5 ++---
> > >  drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 14 ++++----------
> > >  2 files changed, 6 insertions(+), 13 deletions(-)
> > 
> > I prefer this version compared to the v2. A helper routine is
> > unnecessary here because:
> > 1. there are very few scenarios where we have to read back the same
> > register.
> > 2. we may accidently readback a write only register.
> > 
> > > 
> > > diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
> > > index 0e3dfd4c2bc8..4135a53b55a7 100644
> > > --- a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
> > > +++ b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
> > > @@ -466,9 +466,8 @@ static int a6xx_rpmh_start(struct a6xx_gmu *gmu)
> > >  	int ret;
> > >  	u32 val;
> > >  
> > > -	gmu_write(gmu, REG_A6XX_GMU_RSCC_CONTROL_REQ, 1 << 1);
> > > -	/* Wait for the register to finish posting */
> > > -	wmb();
> > > +	gmu_write(gmu, REG_A6XX_GMU_RSCC_CONTROL_REQ, BIT(1));
> > > +	gmu_read(gmu, REG_A6XX_GMU_RSCC_CONTROL_REQ);
> > 
> > This is unnecessary because we are polling on a register on the same port below. But I think we
> > can replace "wmb()" above with "mb()" to avoid reordering between read
> > and write IO instructions.
> 
> If I understand correctly, you don't need any memory barrier.
> writel()/readl()'s are ordered to the same endpoint. That goes for all
> the reordering/barrier comments mentioned below too.
> 
> device-io.rst:
> 
>     The read and write functions are defined to be ordered. That is the
>     compiler is not permitted to reorder the I/O sequence. When the ordering
>     can be compiler optimised, you can use __readb() and friends to
>     indicate the relaxed ordering. Use this with care.
> 
> memory-barriers.txt:
> 
>      (*) readX(), writeX():
> 
> 	    The readX() and writeX() MMIO accessors take a pointer to the
> 	    peripheral being accessed as an __iomem * parameter. For pointers
> 	    mapped with the default I/O attributes (e.g. those returned by
> 	    ioremap()), the ordering guarantees are as follows:
> 
> 	    1. All readX() and writeX() accesses to the same peripheral are ordered
> 	       with respect to each other. This ensures that MMIO register accesses
> 	       by the same CPU thread to a particular device will arrive in program
> 	       order.
> 

In arm64, a writel followed by readl translates to roughly the following
sequence: dmb_wmb(), __raw_writel(), __raw_readl(), dmb_rmb(). I am not
sure what is stopping compiler from reordering  __raw_writel() and __raw_readl()
above? I am assuming iomem cookie is ignored during compilation.

Added Will to this thread if he can throw some light on this.

-Akhil

> 
> > 
> > >  
> > >  	ret = gmu_poll_timeout(gmu, REG_A6XX_GMU_RSCC_CONTROL_ACK, val,
> > >  		val & (1 << 1), 100, 10000);
> > > diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> > > index 973872ad0474..0acbc38b8e70 100644
> > > --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> > > +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> > > @@ -1713,22 +1713,16 @@ static int hw_init(struct msm_gpu *gpu)
> > >  	}
> > >  
> > >  	/* Clear GBIF halt in case GX domain was not collapsed */
> > > +	gpu_write(gpu, REG_A6XX_GBIF_HALT, 0);
> > 
> > We need a full barrier here to avoid reordering. Also, lets add a
> > comment about why we are doing this odd looking sequence.
> > 
> > > +	gpu_read(gpu, REG_A6XX_GBIF_HALT);
> > >  	if (adreno_is_a619_holi(adreno_gpu)) {
> > > -		gpu_write(gpu, REG_A6XX_GBIF_HALT, 0);
> > >  		gpu_write(gpu, REG_A6XX_RBBM_GPR0_CNTL, 0);
> > > -		/* Let's make extra sure that the GPU can access the memory.. */
> > > -		mb();
> > 
> > We need a full barrier here.
> > 
> > > +		gpu_read(gpu, REG_A6XX_RBBM_GPR0_CNTL);
> > >  	} else if (a6xx_has_gbif(adreno_gpu)) {
> > > -		gpu_write(gpu, REG_A6XX_GBIF_HALT, 0);
> > >  		gpu_write(gpu, REG_A6XX_RBBM_GBIF_HALT, 0);
> > > -		/* Let's make extra sure that the GPU can access the memory.. */
> > > -		mb();
> > 
> > We need a full barrier here.
> > 
> > > +		gpu_read(gpu, REG_A6XX_RBBM_GBIF_HALT);
> > >  	}
> > >  
> > > -	/* Some GPUs are stubborn and take their sweet time to unhalt GBIF! */
> > > -	if (adreno_is_a7xx(adreno_gpu) && a6xx_has_gbif(adreno_gpu))
> > > -		spin_until(!gpu_read(gpu, REG_A6XX_GBIF_HALT_ACK));
> > > -
> > 
> > Why is this removed?
> > 
> > -Akhil
> > 
> > >  	gpu_write(gpu, REG_A6XX_RBBM_SECVID_TSB_CNTL, 0);
> > >  
> > >  	if (adreno_is_a619_holi(adreno_gpu))
> > > 
> > > ---
> > > base-commit: 93a39e4766083050ca0ecd6a3548093a3b9eb60c
> > > change-id: 20240508-topic-adreno-a2d199cd4152
> > > 
> > > Best regards,
> > > -- 
> > > Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> > > 
> > 
> 



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux