Hi,
On 5/13/24 16:02, Liu Ying wrote:
The connector is created by either this ADV7511 bridge driver or
any DRM device driver/previous bridge driver, so this ADV7511
bridge driver should not let the next bridge driver create connector.
If the next bridge is a HDMI connector, the next bridge driver
would fail to attach bridge from display_connector_attach() without
the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag.
Add that flag to drm_bridge_attach() function call in
adv7511_bridge_attach() to fix the issue.
This fixes the issue where the HDMI connector bridge fails to attach
to the previous ADV7535 bridge on i.MX8MP EVK platform:
[ 2.216442] [drm:drm_bridge_attach] *ERROR* failed to attach bridge /hdmi-connector to encoder None-37: -22
[ 2.220675] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using ADMA
[ 2.226262] [drm:drm_bridge_attach] *ERROR* failed to attach bridge /soc@0/bus@30800000/i2c@30a30000/hdmi@3d to encoder None-37: -22
[ 2.245204] [drm:drm_bridge_attach] *ERROR* failed to attach bridge /soc@0/bus@32c00000/dsi@32e60000 to encoder None-37: -22
[ 2.256445] imx-lcdif 32e80000.display-controller: error -EINVAL: Failed to attach bridge for endpoint0
[ 2.265850] imx-lcdif 32e80000.display-controller: error -EINVAL: Cannot connect bridge
[ 2.274009] imx-lcdif 32e80000.display-controller: probe with driver imx-lcdif failed with error -22
Fixes: 14b3cdbd0e5b ("drm/bridge: adv7511: make it honour next bridge in DT")
Signed-off-by: Liu Ying <victor.liu@xxxxxxx>
---
drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index dd21b81bd28f..66ccb61e2a66 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -953,7 +953,8 @@ static int adv7511_bridge_attach(struct drm_bridge *bridge,
int ret = 0;
if (adv->next_bridge) {
- ret = drm_bridge_attach(bridge->encoder, adv->next_bridge, bridge, flags);
+ ret = drm_bridge_attach(bridge->encoder, adv->next_bridge, bridge,
+ flags | DRM_BRIDGE_ATTACH_NO_CONNECTOR);
As a side note, I think, maybe you could do better in the future.
If we know that the KMS display driver side has the HDMI connector
already created for us, we should pass DRM_BRIDGE_ATTACH_NO_CONNECTOR
from the root KMS driver side. Which is to forbidden all potential
drm bridge drivers to create a connector in the middle.
The KMS display driver side could parse the DT to know if there is
a hdmi connector, or merely just hdmi connector device node, or
something else.
However, other maintainer and/or reviewer's opinion are of cause
more valuable. I send a A-b because I thought the bug is urgency
and it's probably more important to solve this bug first. And
maybe you can Cc: <stable@xxxxxxxxxxxxxxx> if you like.
Thanks.
if (ret)
return ret;
}
--
Best regards
Sui Jingfeng
