Re: [PATCH v6 0/7] Adds support for ConfigFS to VKMS!

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi all,
On Mon, May 13, 2024 at 10:08:38AM +0200, José Expósito wrote:
> On Fri, May 10, 2024 at 06:19:45PM +0200, Louis Chauvet wrote:
> > Le 09/05/24 - 18:18, Jim Shargo a écrit :
> > > Sima--thanks SO MUCH for going through with everything leaving a
> > > detailed review. I am excited to go through your feedback.
> > > 
> > > It makes me extremely happy to see these patches get people excited.
> > > 
> > > They've bounced between a few people, and I recently asked to take
> > > them over again from the folks who were most recently looking at them
> > > but haven't since had capacity to revisit them. I'd love to contribute
> > > more but I am currently pretty swamped and I probably couldn't
> > > realistically make too much headway before the middle of June.
> > > 
> > > José--if you've got capacity and interest, I'd love to see this work
> > > get in! Thanks!! Please let me know your timeline and if you want to
> > > split anything up or have any questions, I'd love to help if possible.
> > > But most important to me is seeing the community benefit from the
> > > feature.
> > > 
> > > And (in case it got lost in the shuffle of all these patches) the IGT
> > > tests really make it much easier to develop this thing. Marius has
> > > posted the most recent patches:
> > > https://lore.kernel.org/igt-dev/?q=configfs
> > > 
> > > Thanks!
> > > -- Jim
> > > 
> > > 
> > > 
> > > On Wed, May 8, 2024 at 2:17 PM José Expósito <jose.exposito89@xxxxxxxxx> wrote:
> > > >
> > > > Hi everyone,
> > > >
> > > > I wasn't aware of these patches, but I'm really glad they are getting
> > > > some attention, thanks a lot for your review Sima.
> > > >
> > > > Given that it's been a while since the patches were emailed, I'm not
> > > > sure if the original authors of the patches could implement your
> > > > comments. If not, I can work on it. Please let me know.
> > > >
> > > > I'm working on a Mutter feature that'd greatly benefit from this uapi
> > > > and I'm sure other compositors would find it useful.
> > > >
> > > > I'll start working on a new version in a few days if nobody else is
> > > > already working on it.
> > > >
> > > > Best wishes,
> > > > José Expósito
> > 
> > Hi all!
> > 
> > Very nice to see other people working on this subject. As the series 
> > seemed inactive, I started two weeks ago to rebase it on top of [1]. I 
> > also started some work to use drmm_* helpers instead of using lists in 
> > vkms. I currently struggle with a deadlock during rmmod.
> > 
> > I need to clean my commits, but I can share a WIP version.
> 
> Hi Louis,
> 
> If you could share a RFC/WIP series it would be awesome!
> 
> Since you are already working on the kernel patches (and I guess IGT?),
> I'll start working on a libdrm high level API to interact with VKMS from
> user-space on top of your patches. I'll share a link as soon as I have a
> draft PR.

Just out of curiosity what API would that be? These should fairly
simple that they can be configured from a shell script 
(mount/mkdir/rm/echo/umount). Believe should be easy enough to test stuff with 
bunch scripts like that.

Perphas landing the I-G-T tests first (assuming we're settled 
on how exactly this would work) might be of greated help to get a green lit 
the kernel driver side? Skip if vkms/configfs/something else that tells
us VKMS doesn't have ConfigFS eneabled, and run it when that is on.

The lastest iteration was shared by Jim at 
https://lore.kernel.org/igt-dev/20230901092819.16924-1-marius.vlad@xxxxxxxxxxxxx/

That way sub-sequent BAT CI would pick up issues, and can also used
independently by Louis. Should also divide the work-load evenly with
Louis focusing on the just the driver. Happy to review and test it.

> 
> > Maybe we can discuss a bit the comment from Daniel (split init between 
> > default/configfs, use or not a real platform device...)
> > 
> > For the split, I think the first solution (struct vkms_config) can be 
> > easier to understand and to implement, for two reasons:
> > - No need to distinguish between the "default" and the "configfs" devices 
> >   in the VKMS "core". All is managed with only one struct vkms_config.
> > - Most of the lifetime issue should be gone. The only thing to 
> >   synchronize is passing this vkms_config from ConfigFS to VKMS.
> 
> I agree, this seems like the easiest solution.
> 
> > The drawback of this is that it can become difficult to do the "runtime" 
> > configuration (today only hotplug, but I plan to add more complex stuff 
> > like DP emulation, EDID selection, MST support...). Those configuration 
> > must be done "at runtime" and will require a strong synchronization with 
> > the vkms "core".
> > 
> > Maybe we can distinguish between the "creation" and the "runtime 
> > configuration", in two different configFS directory? Once a device is 
> > created, it is moved to the "enabled" directory and will have a different 
> > set of attribute (connection status, current EDID...)
> 
> Once the device is enabled (i.e, `echo 1 > /config/vkms/my-device/enabled`),
> would it make sense to use sysfs instead of another configfs directory?
> The advantage is that with sysfs the kernel controls the lifetime of the
> objects and I think it *might* simplify the code, but I'll need to write a
> proof of concept to see if this works.
Can indeed sysfs be used similar to ConfigFS? To me it sounds like sysfs is a
view into a kernel objects, mostly for viewing and slight modifications
but not manipulating, adding/removing, on the fly, various things. Sort
of see it the other way around, device enabled with sysfs but
configuration happens through ConfigFS. At least from a user-space pov.
> 
> > For the platform driver part, it seems logic to me to use a "real" 
> > platform driver and a platform device for each pipeline, but I don't have 
> > the experience to tell if this is a good idea or not.
> 
> I'm afraid I don't know which approach could work better. Trusting Sima and
> Maíra on this one.
> 
> Jose
> 
> > [1]: https://lore.kernel.org/dri-devel/20240409-yuv-v6-0-de1c5728fd70@xxxxxxxxxxx/
> > 
> > Thanks,
> > Louis Chauvet
> > 
> > -- 
> > Louis Chauvet, Bootlin
> > Embedded Linux and Kernel engineering
> > https://bootlin.com

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux