Hi,
On Thu, May 9, 2024 at 11:05 PM cong yang
<yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
>
> Hi,
>
> Doug Anderson <dianders@xxxxxxxxxxxx> 于2024年5月10日周五 00:49写道：
> >
> > Hi,
> >
> > On Wed, May 8, 2024 at 6:53 PM Cong Yang
> > <yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
> > >
> > > +static int ivo_t109nw41_init(struct hx83102 *ctx)
> > > +{
> > > + struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi };
> > > +
> > > + msleep(60);
> > > +
> > > + hx83102_enable_extended_cmds(&dsi_ctx, true);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETPOWER, 0x2c, 0xed, 0xed, 0x0f, 0xcf, 0x42,
> > > + 0xf5, 0x39, 0x36, 0x36, 0x36, 0x36, 0x32, 0x8b, 0x11, 0x65, 0x00, 0x88,
> > > + 0xfa, 0xff, 0xff, 0x8f, 0xff, 0x08, 0xd6, 0x33);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETDISP, 0x00, 0x47, 0xb0, 0x80, 0x00, 0x12,
> > > + 0x71, 0x3c, 0xa3, 0x22, 0x20, 0x00, 0x00, 0x88, 0x01);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETCYC, 0x35, 0x35, 0x43, 0x43, 0x35, 0x35,
> > > + 0x30, 0x7a, 0x30, 0x7a, 0x01, 0x9d);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETSPCCMD, 0xcd);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETMIPI, 0x84);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETSPCCMD, 0x3f);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETVDC, 0x1b, 0x04);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_UNKNOWN_BE, 0x20);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETPTBA, 0xfc, 0xc4);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETSTBA, 0x34, 0x34, 0x22, 0x11, 0x22, 0xa0,
> > > + 0x31, 0x08, 0xf5, 0x03);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETSPCCMD, 0xcc);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETTCON, 0x80);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETSPCCMD, 0x3f);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETSPCCMD, 0xd3);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETTCON, 0x22);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETSPCCMD, 0x3f);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETSPCCMD, 0xc6);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETRAMDMY, 0x97);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETSPCCMD, 0x3f);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETPWM, 0x00, 0x1e, 0x13, 0x88, 0x01);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETCLOCK, 0x08, 0x13, 0x07, 0x00, 0x0f, 0x34);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETPANEL, 0x02, 0x03, 0x44);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETSPCCMD, 0xc4);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETCASCADE, 0x03);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETSPCCMD, 0x3f);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETPCTRL, 0x07, 0x06, 0x00, 0x02, 0x04, 0x2c,
> > > + 0xff);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETGIP0, 0x06, 0x00, 0x00, 0x00, 0x00, 0x08,
> > > + 0x08, 0x08, 0x08, 0x37, 0x07, 0x64, 0x7c, 0x11, 0x11, 0x03, 0x03, 0x32,
> > > + 0x10, 0x0e, 0x00, 0x0e, 0x32, 0x17, 0x97, 0x07, 0x97, 0x32, 0x00, 0x02,
> > > + 0x00, 0x02, 0x00, 0x00);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETGIP1, 0x25, 0x24, 0x25, 0x24, 0x18, 0x18,
> > > + 0x18, 0x18, 0x07, 0x06, 0x07, 0x06, 0x05, 0x04, 0x05, 0x04, 0x03, 0x02,
> > > + 0x03, 0x02, 0x01, 0x00, 0x01, 0x00, 0x1e, 0x1e, 0x1e, 0x1e, 0x1f, 0x1f,
> > > + 0x1f, 0x1f, 0x21, 0x20, 0x21, 0x20, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
> > > + 0x18, 0x18);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETGIP3, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xa0,
> > > + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xa0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > > + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > > + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETGMA, 0x04, 0x04, 0x06, 0x0a, 0x0a, 0x05,
> > > + 0x12, 0x14, 0x17, 0x13, 0x2c, 0x33, 0x39, 0x4b, 0x4c, 0x56, 0x61, 0x78,
> > > + 0x7a, 0x41, 0x50, 0x68, 0x73, 0x04, 0x04, 0x06, 0x0a, 0x0a, 0x05, 0x12,
> > > + 0x14, 0x17, 0x13, 0x2c, 0x33, 0x39, 0x4b, 0x4c, 0x56, 0x61, 0x78, 0x7a,
> > > + 0x41, 0x50, 0x68, 0x73);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETTP1, 0x07, 0x10, 0x10, 0x1a, 0x26, 0x9e,
> > > + 0x00, 0x4f, 0xa0, 0x14, 0x14, 0x00, 0x00, 0x00, 0x00, 0x12, 0x0a, 0x02,
> > > + 0x02, 0x00, 0x33, 0x02, 0x04, 0x18, 0x01);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x01);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETPOWER, 0x01, 0x7f, 0x11, 0xfd);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETCLOCK, 0x86);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETGIP0, 0x00, 0x00, 0x04, 0x00, 0x00);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETGIP3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > > + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xa0,
> > > + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xa0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > > + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETTP1, 0x02, 0x00, 0x2b, 0x01, 0x7e, 0x0f,
> > > + 0x7e, 0x10, 0xa0, 0x00, 0x00, 0x77, 0x00, 0x00, 0x00);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x02);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETPTBA, 0xf2);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETCLOCK, 0x03, 0x07, 0x00, 0x10, 0x79);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETGIP3, 0xff, 0xff, 0xff, 0xff, 0xfa, 0xa0,
> > > + 0xff, 0xff, 0xff, 0xff, 0xfa, 0xa0);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETTP1, 0xfe, 0x01, 0xfe, 0x01, 0xfe, 0x01,
> > > + 0x00, 0x00, 0x00, 0x23, 0x00, 0x23, 0x81, 0x02, 0x40, 0x00, 0x20, 0x6e,
> > > + 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x03);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETSPCCMD, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xa0,
> > > + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xa0, 0xff, 0xff, 0xff, 0xff, 0xfa, 0xa0,
> > > + 0xff, 0xff, 0xff, 0xff, 0xfa, 0xa0, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xa0,
> > > + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xa0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > > + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETSPCCMD, 0xc6);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETCYC, 0x03, 0xff, 0xf8);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETSPCCMD, 0x3f);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_UNKNOWN_E1, 0x00);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x00);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_UNKNOWN_D2, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETSPCCMD, 0xc4);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETMIPI, 0x96);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETSPCCMD, 0x3f);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x01);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETSPCCMD, 0xc5);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETMIPI, 0x4f);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETSPCCMD, 0x3f);
> > > + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x00);
> > > + if (dsi_ctx.accum_err)
> > > + return dsi_ctx.accum_err;
> >
> > Since this is a new panel you're adding support for and there's no
> > excuse that we don't want to change the old command sequence, it seems
> > like you should add the call to:
> >
> > hx83102_enable_extended_cmds(&dsi_ctx, false);
> >
> > If for some reason that would be a bad idea, let me know.
>
> Confirm with the vendor again , disable extended cmds is prevent the ESD
> mechanism write (currently there is no ESD check mechanism) ic register.
> So it may not have any impact whether add disable extended cmds or not.
> Of course for me, I prefer to upload according to the initial code
> provided by vendor.
>
> If you prefer add it I also can fix in V6.
I'd prefer it be added for any new panels unless a vendor says we
shouldn't. For the old panel I'd be OK w/ keeping it how it was.
-Doug
