On Fri, May 10, 2024 at 2:56 AM Dmitry Baryshkov
<dmitry.baryshkov@xxxxxxxxxx> wrote:
>
> On Thu, May 09, 2024 at 08:14:07PM +0200, Barnabás Czémán wrote:
> > Move DCS off commands from .unprepare to .disable so that they
> > actually reach the DSI host.
> >
> > Signed-off-by: Barnabás Czémán <trabarni@xxxxxxxxx>
> > ---
> > drivers/gpu/drm/panel/panel-jdi-fhd-r63452.c | 12 ++++++++++--
> > 1 file changed, 10 insertions(+), 2 deletions(-)
>
> I don't think this is correct. If the driver sends enable commands in
> prepare, it should be able to send commands during unprepare too.
>
It cannot send commands in unprepare, there are multiple panel drivers
what do the same.
Every panel drivers which have DCS commands to be sent in unprepare
has similar error messages with mdp5/dpu.
[ 92.322564] panel-td4320-boeplus c994000.dsi.0: sending command
0x28 failed: -22
[ 92.322635] panel-td4320-boeplus c994000.dsi.0: Failed to
un-initialize panel: -22
> >
> > diff --git a/drivers/gpu/drm/panel/panel-jdi-fhd-r63452.c b/drivers/gpu/drm/panel/panel-jdi-fhd-r63452.c
> > index 483dc88d16d8..f7222974d6ed 100644
> > --- a/drivers/gpu/drm/panel/panel-jdi-fhd-r63452.c
> > +++ b/drivers/gpu/drm/panel/panel-jdi-fhd-r63452.c
> > @@ -169,6 +169,15 @@ static int jdi_fhd_r63452_prepare(struct drm_panel *panel)
> > }
> >
> > static int jdi_fhd_r63452_unprepare(struct drm_panel *panel)
> > +{
> > + struct jdi_fhd_r63452 *ctx = to_jdi_fhd_r63452(panel);
> > +
> > + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> > +
> > + return 0;
> > +}
> > +
> > +static int jdi_fhd_r63452_disable(struct drm_panel *panel)
> > {
> > struct jdi_fhd_r63452 *ctx = to_jdi_fhd_r63452(panel);
> > struct device *dev = &ctx->dsi->dev;
> > @@ -178,8 +187,6 @@ static int jdi_fhd_r63452_unprepare(struct drm_panel *panel)
> > if (ret < 0)
> > dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
> >
> > - gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> > -
> > return 0;
> > }
> >
> > @@ -219,6 +226,7 @@ static int jdi_fhd_r63452_get_modes(struct drm_panel *panel,
> > static const struct drm_panel_funcs jdi_fhd_r63452_panel_funcs = {
> > .prepare = jdi_fhd_r63452_prepare,
> > .unprepare = jdi_fhd_r63452_unprepare,
> > + .disable = jdi_fhd_r63452_disable,
> > .get_modes = jdi_fhd_r63452_get_modes,
> > };
> >
> >
> > ---
> > base-commit: 704ba27ac55579704ba1289392448b0c66b56258
> > change-id: 20240509-jdi-use-disable-ee29098d9c81
> >
> > Best regards,
> > --
> > Barnabás Czémán <trabarni@xxxxxxxxx>
> >
>
> --
> With best wishes
> Dmitry
