On 08/05/2024 21:53, Lucas De Marchi wrote:
On Wed, May 08, 2024 at 09:23:17AM GMT, Tvrtko Ursulin wrote:On 07/05/2024 22:35, Lucas De Marchi wrote:On Fri, Apr 26, 2024 at 11:47:37AM GMT, Tvrtko Ursulin wrote:On 24/04/2024 00:56, Lucas De Marchi wrote:Print the accumulated runtime for client when printing fdinfo. Each time a query is done it first does 2 things: 1) loop through all the exec queues for the current client and accumulate the runtime, per engine class. CTX_TIMESTAMP is used for that, being read from the context image.2) Read a "GPU timestamp" that can be used for considering "how much GPUtime has passed" and that has the same unit/refclock as the one recording the runtime. RING_TIMESTAMP is used for that via MMIO. Since for all current platforms RING_TIMESTAMP follows the same refclock, just read it once, using any first engine. This is exported to userspace as 2 numbers in fdinfo: drm-cycles-<class>: <RUNTIME> drm-total-cycles-<class>: <TIMESTAMP> Userspace is expected to collect at least 2 samples, which allows to know the client engine busyness as per: RUNTIME1 - RUNTIME0 busyness = --------------------- T1 - T0 Another thing to point out is that it's expected that userspace willread any 2 samples every few seconds. Given the update frequency of thecounters involved and that CTX_TIMESTAMP is 32-bits, the counter foreach exec_queue can wrap around (assuming 100% utilization) after ~200s. The wraparound is not perceived by userspace since it's just accumulatedfor all the exec_queues in a 64-bit counter), but the measurement will not be accurate if the samples are too far apart.This could be mitigated by adding a workqueue to accumulate the countersevery so often, but it's additional complexity for something that is done already by userspace every few seconds in tools like gputop (from igt), htop, nvtop, etc with none of them really defaulting to 1 sample per minute or more. Signed-off-by: Lucas De Marchi <lucas.demarchi@xxxxxxxxx> --- Documentation/gpu/drm-usage-stats.rst | 16 ++- Documentation/gpu/xe/index.rst | 1 + Documentation/gpu/xe/xe-drm-usage-stats.rst | 10 ++drivers/gpu/drm/xe/xe_drm_client.c | 138 +++++++++++++++++++-4 files changed, 162 insertions(+), 3 deletions(-) create mode 100644 Documentation/gpu/xe/xe-drm-usage-stats.rstdiff --git a/Documentation/gpu/drm-usage-stats.rst b/Documentation/gpu/drm-usage-stats.rstindex 6dc299343b48..421766289b78 100644 --- a/Documentation/gpu/drm-usage-stats.rst +++ b/Documentation/gpu/drm-usage-stats.rst@@ -112,6 +112,17 @@ larger value within a reasonable period. Upon observing a value lower than what was previously read, userspace is expected to stay with that larger previousvalue until a monotonic update is seen. +- drm-total-cycles-<keystr>: <uint> + +Engine identifier string must be the same as the one specified in the+drm-cycles-<keystr> tag and shall contain the total number cycles for the given+engine. ++This is a timestamp in GPU unspecified unit that matches the update rate +of drm-cycles-<keystr>. For drivers that implement this interface, the engine +utilization can be calculated entirely on the GPU clock domain, without+considering the CPU sleep time between 2 samples.Two opens. 1)Do we need to explicity document that drm-total-cycles and drm-maxfreq are mutually exclusive?so userspace has a fallback mechanism to calculate utilization depending on what keys are available?No, to document all three at once do not make sense. Or at least are not expected. Or you envisage someone might legitimately emit all three? I don't see what would be the semantics. When we have cycles+maxfreq the latter is in Hz. And when we have cycles+total then it is unitless. All three?I don't follow what you mean here. *cycles* is actually a unit. The engine spent 10 cycles running this context (drm-cycles). In the same period there were 100 cycles available (drm-total-cycles). Current frequency is X MHz. Max frequency is Y MHz. For me all of them make sense if one wants to mix them together. For xe it doesn't make sense because the counter backing drm-cycles and drm-total-cycles is unrelated to the engine frequency. I can add something in the doc that we do not expected to see all of them together until we see a usecase. Each driver may implement a subset.
I still don't quite see how a combination of cycles, total cycles and maxfreq makes sense together. It would require a driver where cycle period is equal to 1 / maxfreq, which also means total-cycles would be equal to maxfreq, making one of them redundant. So both for drivers like xe where cycle period is unrelated to maxfreq (or even the fataly misguided curfreq) it doens't make sense, and for driver like above is not needed. What use case am I missing?
We need to document this properly so userspace knows how to do the right thing depending on what keys they discover.
2) Should drm-total-cycles for now be documents as driver specific?you mean to call it xe-total-cycles?Yes but it is not an ask, just an open.Ok, my opinion is that we shouldn't. Just like we have drm-cycles today implemented by some drivers, but not all. I'd consider the drm-curfreq, not documented in the drm layer as something to be fixed or migrated to a driver-only interface (probably not possible anymore as it'd break the uapi). Problem I see with turning it into xe-total-cycles, is that the moment another driver decide to implement they will either have to use xe- prefix or xe will need to start publishing both keys. As said above, I can document that it's not expected to use both total and maxfreq as it's currently the case.
I see your point. If as an alternative solution we would say it is okay to prefix driver specific keys drm-? It would legitimise panfrost drm-curfreq. Downside would be anyone adding new common keys would have to inspect all driver specific docs, and worse, the actual source since people do forget to document things.
Even having drm-cycles + xe-total-cycles wouldn't be spec compliant. Okay.. drm-total-cycles- sounds like the least bad solution. Luckily it feels a clean concept with some chance of reuse.
Regards, Tvrtko
I have added some more poeple in the cc who were involved with driver fdinfo implementations if they will have an opinion.I would say potentially yes, and promote it to common if more than one driver would use it.For instance I see panfrost has the driver specific drm-curfreq (although isn't documenting it fully in panfrost.rst). And I have to say it is somewhat questionable to expose the current frequency per fdinfo per engine but not my call.aren't all of Documentation/gpu/drm-usage-stats.rst optional that driver may or may not implement? When you say driver-specific I'd think more of the ones not using <drm> as prefix as e.g. amd-*. I think drm-cycles + drm-total-cycles is just an alternative implementation for engine utilization. Like drm-cycles + drm-maxfreq already is an alternative to drm-engine and is not implemented by e.g. amdgpu/i915. I will submit a new version of the entire patch series to get the ball rolling, but let's keep this open for now. <...>+static void show_runtime(struct drm_printer *p, struct drm_file *file)+{ + struct xe_file *xef = file->driver_priv; + struct xe_device *xe = xef->xe; + struct xe_gt *gt; + struct xe_hw_engine *hwe; + struct xe_exec_queue *q;+ unsigned long i, id_hwe, id_gt, capacity[XE_ENGINE_CLASS_MAX] = { };+ u64 gpu_timestamp, engine_mask = 0; + bool gpu_stamp = false; + + xe_pm_runtime_get(xe); + + /* Accumulate all the exec queues from this client */ + mutex_lock(&xef->exec_queue.lock); + xa_for_each(&xef->exec_queue.xa, i, q) + xe_exec_queue_update_runtime(q); + mutex_unlock(&xef->exec_queue.lock); + + + /* Calculate capacity of each engine class */ + BUILD_BUG_ON(ARRAY_SIZE(class_to_mask) != XE_ENGINE_CLASS_MAX); + for_each_gt(gt, xe, id_gt) + engine_mask |= gt->info.engine_mask; + for (i = 0; i < XE_ENGINE_CLASS_MAX; i++) + capacity[i] = hweight64(engine_mask & class_to_mask[i]);FWIW the above two loops are static so could store capacity in struct xe_device.yes, but just creating a cache in xe of something derived from gt is not something to consider lightly. Particularly considering the small number of xe->info.gt_count we have. For something that runs only when someone cat the fdinfo, this doesn't seem terrible.+ + /* + * Iterate over all engines, printing the accumulated + * runtime for this client, per engine class + */ + for_each_gt(gt, xe, id_gt) { + xe_force_wake_get(gt_to_fw(gt), XE_FW_GT); + for_each_hw_engine(hwe, gt, id_hwe) { + const char *class_name; + + if (!capacity[hwe->class]) + continue; + + /*+ * Use any (first) engine to have a timestamp to be used every+ * time + */ + if (!gpu_stamp) { + gpu_timestamp = xe_hw_engine_read_timestamp(hwe); + gpu_stamp = true; + } + + class_name = xe_hw_engine_class_to_str(hwe->class); + + drm_printf(p, "drm-cycles-%s:\t%llu\n", + class_name, xef->runtime[hwe->class]); + drm_printf(p, "drm-total-cycles-%s:\t%llu\n", + class_name, gpu_timestamp); + + if (capacity[hwe->class] > 1) + drm_printf(p, "drm-engine-capacity-%s:\t%lu\n", + class_name, capacity[hwe->class]); + + /* engine class already handled, skip next iterations */ + capacity[hwe->class] = 0; + } + xe_force_wake_put(gt_to_fw(gt), XE_FW_GT); + }More FWIW and AFAICT, could just walk the "list" of classes instead ofxe_force_wake_get() is per gt, so the alternative would be... loopthrough the gts to get all forcewakes, loop through all engine classes, loopagain through all gts to put the forcewake. And we also need to consider that an engine class may not be available in all GTs... example: vcs/vecs in MTL and later, so we need to track it globally across GTs anyway.Forcewake is only needed once for the gpu_timestamp, no? At least I don't see any other potential hardware access in the loop. Hence I thought if you could have a known engine to get the timestamp outside the loop, you could then run a flat loop (over classes) avoiding the per gt fw dance. Your choice ofc.makes sense... I will try this and run some tests. thanks Lucas De Marchi
