Re: [PATCH v2 2/3] dt-bindings: arm: mediatek: mmsys: Add OF graph support for board path

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Il 07/05/24 08:59, CK Hu (胡俊光) ha scritto:
On Thu, 2024-05-02 at 10:50 +0200, AngeloGioacchino Del Regno wrote:
Il 25/04/24 04:23, CK Hu (胡俊光) ha scritto:
Hi, Angelo:

On Tue, 2024-04-09 at 14:02 +0200, AngeloGioacchino Del Regno
wrote:
Document OF graph on MMSYS/VDOSYS: this supports up to three DDP
paths
per HW instance (so potentially up to six displays for multi-vdo
SoCs).

The MMSYS or VDOSYS is always the first component in the DDP
pipeline,
so it only supports an output port with multiple endpoints -
where
each
endpoint defines the starting point for one of the (currently
three)
possible hardware paths.

Signed-off-by: AngeloGioacchino Del Regno <
angelogioacchino.delregno@xxxxxxxxxxxxx>
---
   .../bindings/arm/mediatek/mediatek,mmsys.yaml | 23
+++++++++++++++++++
   1 file changed, 23 insertions(+)

diff --git
a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.y
aml
b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.y
aml
index b3c6888c1457..4e9acd966aa5 100644
---
a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.y
aml
+++
b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.y
aml
@@ -93,6 +93,29 @@ properties:
     '#reset-cells':
       const: 1
+ port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      Output port node. This port connects the MMSYS/VDOSYS
output
to
+      the first component of one display pipeline, for example
one
of
+      the available OVL or RDMA blocks.
+      Some MediaTek SoCs support up to three display outputs per
MMSYS.
+    properties:
+      endpoint@0:
+        $ref: /schemas/graph.yaml#/properties/endpoint
+        description: Output to the primary display pipeline
+
+      endpoint@1:
+        $ref: /schemas/graph.yaml#/properties/endpoint
+        description: Output to the secondary display pipeline
+
+      endpoint@2:
+        $ref: /schemas/graph.yaml#/properties/endpoint
+        description: Output to the tertiary display pipeline
+
+    required:
+      - endpoint@0
+

mmsys/vdosys does not output data to the first component of display
pipeline, so this connection looks 'virtual'. Shall we add
something
virtual in device tree? You add this in order to decide which
pipeline
is 1st, 2nd, 3rd, but for device it don't care which one is first.
In
computer, software could change which display is the primary
display.
I'm not sure it's good to decide display order in device tree?


Devicetree describes hardware, so nothing virtual can be present -
and in any case,
the primary/secondary/tertiary pipeline is in relation to MM/VDO SYS,
not referred
to software.

Better explaining, the primary pipeline is not necessarily the
primary display in
DRM terms: that's a concept that is completely detached from the
scope of this
series and this graph - and it's something that shall be managed
solely by the
driver (mediatek-drm in this case).

Coming back to the connection looking, but *not* being virtual: the
sense here is
that the MM/VDOSYS blocks are used in the display pipeline to
"stitch" together
the various display pipeline hardware blocks, or, said differently,
setting up the
routing between all of those (P.S.: mmsys_mtxxxx_routing_table!)
through the VDO
Input Selection (VDOx_SEL_IN) or Output Selection (VDOx_SEL_OUT) and
with the
assistance of the VDO Multiple Output Mask (VDOx_MOUT) for the
multiple outputs
usecase, both of which, are described by this graph.

I agree this part, but this is related to display device OF graph.
These display device would output video data from one device and input
to another video device. These video device would not input or output
video data to mmsys/vdosys.


This means that the VDOSYS is really the "master" of the display
pipeline since
everything gets enabled, mixed and matched from there - and that's in
the sense
of hardware operation, so we are *really* (and not virtually!)
flipping switches.

I agree mmsys/vdosys is master of video pipeline, so let's define what
the port in mmsys/vdosys is. If the port means the master relationship,
mmsys/vdosys should output port to every display device. Or use a
simply way to show the master relation ship

mmsys-subdev = <&ovl0, &rdma0, &color0, ...>, <&ovl1, &rdma1, &color1,
...>;


There's no need to list all of the VDO0/VDO1/mmsys devices in one big array
property, because the actual possible devices can be defined:
  1. In the bindings; and
  2. In the actual OF graph that we write for each SoC+board combination.

A graph cannot contain a connection to a device that cannot be connected to
the previous, so, your "mmsys-subdev" list can be retrieved by looking at the
graph:
 - Start from VDO0/1 or MMSYS
 - Walk through (visually, even) OUTPUT ports
   - VDO0 (read output ep) -> ovl0 (read output ep) -> rdma0 (read output ep) ->
     color0 (...) -> etc
 - Nothing more - it's all defined there.


Another problem is how to group display device? If two pipeline could
be route to the same display interface, such as

rdma0 -> dsi
rdma1 -> dsi

Would this be single group?

There are multiple ways of doing this, but one that comes to my mind right now and
that looks clean as well is the following:

ovl0@ef01 {
   .....
  ports {
    port@0 {
      reg = <0>;
      ovl0_in: endpoint {
        remote-endpoint = <&vdosys0_out>;
      };
    };

    port@1 {
      reg = <1>;
      ovl0_out0: endpoint@0 {
        remote-endpoint = <&rdma0_in>;
      };
      ovl0_out1: endpoint@1 {
        remote-endpoint = <&rdma1_in>;
      };
    };
  };
};

rdma0@1234 {
   .....
  ports {
    port@0 {
      reg = <0>;
      rdma0_in: endpoint {
        remote-endpoint = <&ovl0_out0>; /* assuming ovl0 outputs to rdma0...*/
      };
    };
    port@1 {
      reg = <1>;
      rdma0_out: endpoint@1 {
        remote-endpoint = <&dsi_dual_intf0_in>;
      };
    };
  };
};


rdma1@5678 {
   .....
  ports {
    port@0 {
      reg = <0>;
      rdma1_in: endpoint {
        /* assuming ovl0 outputs to rdma1 as well... can be something else. */
        remote-endpoint = <&ovl0_out1>;
      };
    };
    port@1 {
      reg = <1>;
      rdma1_out: endpoint {
        remote-endpoint = <&dsi_dual_intf1_in>;
      };
    };
  };
};


dsi@9abcd {
   .....
  ports {
    port@0 {
      reg = <0>;
      /* Where endpoint@0 could be always DSI LEFT CTRL */
      dsi_dual_intf0_in: endpoint@0 {
        remote-endpoint = <&rdma0_out>;
      };
      /* ...and @1 could be always DSI RIGHT CTRL */
      dsi_dual_intf1_in: endpoint@1 {
        remote-endpoint = <&rdma1_out>;
      };
    };

    port@1 {
      reg = <1>;
      dsi0_out: endpoint {
        remote-endpoint = <&dsi_panel_in>;
      };
    };
  };
};

...for a dual-dsi panel, it'd be a similar graph.

Cheers,
Angelo


mmsys-subdev = <&rdma0, &rdma1, &dsi>;

Or two group?

mmsys-subdev = <&rdma0, &dsi>, <&rdma1, &dsi>;

I think we should clearly define this.

Regards,
CK



Cheers,
Angelo

Regards,
CK


   required:
     - compatible
     - reg








[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux