Some bridges have very strict power-up reqirements. In this case, the
Toshiba TC358775. The reset has to be deasserted while *both* the DSI
clock and DSI data lanes are in LP-11 mode. After the reset is relased,
the bridge needs the DSI clock to actually be able to process I2C
access. This access will configure the DSI side of the bridge during
which the DSI data lanes have to be in LP-11 mode. After everything is
configured the video stream can finally be enabled.
This means:
(1) The bridge has to be configured completely in .pre_enable() op
(with the clock turned on and data lanes in LP-11 mode, thus
.pre_enable_prev_first has to be set).
(2) The bridge will enable its output in the .enable() op
(3) There must be some mechanism before (1) where the bridge can
release its reset while the clock lane is still in LP-11 mode.
Unfortunately, (3) is crucial for a correct operation of the bridge.
To satisfy this requriment, introduce a new callback .dsi_lp11_notify()
which will be called by the DSI host driver.
Signed-off-by: Michael Walle <mwalle@xxxxxxxxxx>
---
drivers/gpu/drm/drm_bridge.c | 16 ++++++++++++++++
include/drm/drm_bridge.h | 12 ++++++++++++
2 files changed, 28 insertions(+)
diff --git a/drivers/gpu/drm/drm_bridge.c b/drivers/gpu/drm/drm_bridge.c
index 28abe9aa99ca..98cd6558aecb 100644
--- a/drivers/gpu/drm/drm_bridge.c
+++ b/drivers/gpu/drm/drm_bridge.c
@@ -1339,6 +1339,22 @@ void drm_bridge_hpd_notify(struct drm_bridge *bridge,
}
EXPORT_SYMBOL_GPL(drm_bridge_hpd_notify);
+/**
+ * drm_bridge_dsi_lp11_notify - notify clock/data lanes LP-11 mode
+ * @bridge: bridge control structure
+ *
+ * DSI host drivers shall call this function while the clock and data lanes
+ * are still in LP-11 mode.
+ *
+ * This function shall be called in a context that can sleep.
+ */
+void drm_bridge_dsi_lp11_notify(struct drm_bridge *bridge)
+{
+ if (bridge->funcs->dsi_lp11_notify)
+ bridge->funcs->dsi_lp11_notify(bridge);
+}
+EXPORT_SYMBOL_GPL(drm_bridge_dsi_lp11_notify);
+
#ifdef CONFIG_OF
/**
* of_drm_find_bridge - find the bridge corresponding to the device node in
diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h
index 4baca0d9107b..4ef61274e0a8 100644
--- a/include/drm/drm_bridge.h
+++ b/include/drm/drm_bridge.h
@@ -630,6 +630,17 @@ struct drm_bridge_funcs {
*/
void (*hpd_disable)(struct drm_bridge *bridge);
+ /**
+ * dsi_lp11_notify:
+ *
+ * Will be called by the DSI host driver while both the DSI clock
+ * lane as well as the DSI data lanes are in LP-11 mode. Some bridges
+ * need this state while releasing the reset, for example.
+ * Not all DSI host drivers will support this. Therefore, the DSI
+ * bridge driver must not rely on this op to be called.
+ */
+ void (*dsi_lp11_notify)(struct drm_bridge *bridge);
+
/**
* @debugfs_init:
*
@@ -898,6 +909,7 @@ void drm_bridge_hpd_enable(struct drm_bridge *bridge,
void drm_bridge_hpd_disable(struct drm_bridge *bridge);
void drm_bridge_hpd_notify(struct drm_bridge *bridge,
enum drm_connector_status status);
+void drm_bridge_dsi_lp11_notify(struct drm_bridge *bridge);
#ifdef CONFIG_DRM_PANEL_BRIDGE
bool drm_bridge_is_panel(const struct drm_bridge *bridge);
--
2.39.2
