Make this driver less DT-dependent by calling the newly created helpers, also switch to use fwnode APIs to acquire additional device properties. No functional changes for DT-based systems. Signed-off-by: Sui Jingfeng <sui.jingfeng@xxxxxxxxx> --- drivers/gpu/drm/bridge/ti-tfp410.c | 41 +++++++++++++++--------------- 1 file changed, 21 insertions(+), 20 deletions(-) diff --git a/drivers/gpu/drm/bridge/ti-tfp410.c b/drivers/gpu/drm/bridge/ti-tfp410.c index c7bef5c23927..58dc7492844f 100644 --- a/drivers/gpu/drm/bridge/ti-tfp410.c +++ b/drivers/gpu/drm/bridge/ti-tfp410.c @@ -266,8 +266,9 @@ static const struct drm_bridge_timings tfp410_default_timings = { static int tfp410_parse_timings(struct tfp410 *dvi, bool i2c) { + struct fwnode_handle *fwnode = dev_fwnode(dvi->dev); struct drm_bridge_timings *timings = &dvi->timings; - struct device_node *ep; + struct fwnode_handle *ep; u32 pclk_sample = 0; u32 bus_width = 24; u32 deskew = 0; @@ -288,14 +289,14 @@ static int tfp410_parse_timings(struct tfp410 *dvi, bool i2c) * and EDGE pins. They are specified in DT through endpoint properties * and vendor-specific properties. */ - ep = of_graph_get_endpoint_by_regs(dvi->dev->of_node, 0, 0); + ep = fwnode_graph_get_endpoint_by_id(fwnode, 0, 0, 0); if (!ep) return -EINVAL; /* Get the sampling edge from the endpoint. */ - of_property_read_u32(ep, "pclk-sample", &pclk_sample); - of_property_read_u32(ep, "bus-width", &bus_width); - of_node_put(ep); + fwnode_property_read_u32(ep, "pclk-sample", &pclk_sample); + fwnode_property_read_u32(ep, "bus-width", &bus_width); + fwnode_handle_put(ep); timings->input_bus_flags = DRM_BUS_FLAG_DE_HIGH; @@ -324,7 +325,7 @@ static int tfp410_parse_timings(struct tfp410 *dvi, bool i2c) } /* Get the setup and hold time from vendor-specific properties. */ - of_property_read_u32(dvi->dev->of_node, "ti,deskew", &deskew); + fwnode_property_read_u32(fwnode, "ti,deskew", &deskew); if (deskew > 7) return -EINVAL; @@ -336,12 +337,12 @@ static int tfp410_parse_timings(struct tfp410 *dvi, bool i2c) static int tfp410_init(struct device *dev, bool i2c) { - struct device_node *node; + struct fwnode_handle *fwnode = dev_fwnode(dev); struct tfp410 *dvi; int ret; - if (!dev->of_node) { - dev_err(dev, "device-tree data is missing\n"); + if (!fwnode) { + dev_err(dev, "firmware data is missing\n"); return -ENXIO; } @@ -352,8 +353,8 @@ static int tfp410_init(struct device *dev, bool i2c) dvi->dev = dev; dev_set_drvdata(dev, dvi); + drm_bridge_set_node(&dvi->bridge, fwnode); dvi->bridge.funcs = &tfp410_bridge_funcs; - dvi->bridge.of_node = dev->of_node; dvi->bridge.timings = &dvi->timings; dvi->bridge.type = DRM_MODE_CONNECTOR_DVID; @@ -362,15 +363,15 @@ static int tfp410_init(struct device *dev, bool i2c) return ret; /* Get the next bridge, connected to port@1. */ - node = of_graph_get_remote_node(dev->of_node, 1, -1); - if (!node) - return -ENODEV; - - dvi->next_bridge = of_drm_find_bridge(node); - of_node_put(node); - - if (!dvi->next_bridge) + dvi->next_bridge = drm_bridge_find_next_bridge_by_fwnode(fwnode, 1); + if (IS_ERR(dvi->next_bridge)) { + ret = PTR_ERR(dvi->next_bridge); + dev_err(dev, "Error in founding the next bridge: %d\n", ret); + return ret; + } else if (!dvi->next_bridge) { + dev_dbg(dev, "Next bridge not found, deferring probe\n"); return -EPROBE_DEFER; + } /* Get the powerdown GPIO. */ dvi->powerdown = devm_gpiod_get_optional(dev, "powerdown", @@ -422,10 +423,10 @@ static struct platform_driver tfp410_platform_driver = { /* There is currently no i2c functionality. */ static int tfp410_i2c_probe(struct i2c_client *client) { + struct fwnode_handle *fwnode = dev_fwnode(&client->dev); int reg; - if (!client->dev.of_node || - of_property_read_u32(client->dev.of_node, "reg", ®)) { + if (!fwnode || fwnode_property_read_u32(fwnode, "reg", ®)) { dev_err(&client->dev, "Can't get i2c reg property from device-tree\n"); return -ENXIO; -- 2.34.1