On Fri, 03 May 2024, FLAVIO SULIGOI wrote: > Hi Lee, > > ... > > > Subject: EXTERNAL: Re: (subset) [PATCH v1 1/1] backlight: mp3309c: fix > > leds flickering in pwm mode > > > > [Use caution with links & attachments] > > > > > > > > On Thu, 02 May 2024, Lee Jones wrote: > > > > > On Wed, 17 Apr 2024 17:31:05 +0200, Flavio Suligoi wrote: > > > > The mp3309 has two configuration registers, named according to their > > > > address (0x00 and 0x01). > > > > In the second register (0x01), the bit DIMS (Dimming Mode Select) > > > > must be always 0 (zero), in both analog (via i2c commands) and pwm > > > > dimming mode. > > > > > > > > In the initial driver version, the DIMS bit was set in pwm mode and > > > > reset in analog mode. > > > > But if the DIMS bit is set in pwm dimming mode and other devices are > > > > connected on the same i2c bus, every i2c commands on the bus > > > > generates a flickering on the LEDs powered by the mp3309c. > > > > > > > > [...] > > > > > > Applied, thanks! > > > > > > [1/1] backlight: mp3309c: fix leds flickering in pwm mode > > > commit: ce60cddc2abf61902dfca71d630624db95315124 > > > > Applied, but in future it's; I2C, PWM and LED, thanks. > > Sorry for my question, but do you mean that I also have to add the I2C, > PWM and LED mailing lists in my messages related to the mp33309c patches? Just use proper capitalisation when you abbreviate the names these subsystems please. -- Lee Jones [李琼斯]
