Hi
Am 23.04.24 um 21:51 schrieb Cary Garrett:
Hello,
An Aspeed VGA monitor, in my case AST 2400, after a suspend/resume
cycle suffers with a "No Signal" state. This is also true of a
IPMI/BMC remote console. To restore the "Signal" state requires
a reboot or the following workaround.
To restore the "Signal" state without rebooting issue the
following commands from a SSH session or serial console
after every suspend/resume cycle:
sudo modprobe -r ast
sudo modprobe ast
This a home media server which is updated infrequently, so
I am unable offer any guidance as to when this issue started
occurring.
Just to clarify, suspend/resume did restore the display in earlier versions?
Best regards
Thomas
Regards, Cary Garrett
Current environment:
uname -a:
Linux xxxxxx-server 6.8.7-arch1-1 #1 SMP PREEMPT_DYNAMIC Wed, 17 Apr 2024 15:20:28 +0000 x86_64
GNU/Linux
modinfo:
filename: /lib/modules/6.8.7-arch1-1/kernel/drivers/gpu/drm/ast/ast.ko.zst
license: GPL and additional rights
description: AST
author: Dave Airlie
firmware: ast_dp501_fw.bin
srcversion: 7E39455BCA2D11E968D8B2B
alias: pci:v00001A03d00002010sv*sd*bc03sc*i*
alias: pci:v00001A03d00002000sv*sd*bc03sc*i*
depends: i2c-algo-bit
retpoline: Y
intree: Y
name: ast
vermagic: 6.8.7-arch1-1 SMP preempt mod_unload
sig_id: PKCS#7
signer: Build time autogenerated kernel key
sig_key: 76:06:C7:84:BC:2F:C6:38:38:61:C1:6F:32:D5:6A:03:88:22:68:1C
sig_hashalgo: sha512
signature: 30:66:02:31:00:AD:83:EB:D2:9B:91:E6:C3:9B:52:89:51:4B:BB:06:
DE:D7:44:A6:6B:07:92:AA:75:2A:0B:20:26:73:58:09:DF:C3:86:C6:
FC:B7:D4:13:5F:5D:35:4D:67:89:73:0E:C2:02:31:00:C3:98:99:67:
B4:74:02:5C:6D:D3:81:13:D4:9F:B4:F4:CF:37:8A:7C:84:8C:73:BF:
DF:4D:D5:34:B0:0A:CE:0E:59:67:28:98:07:BF:D7:FA:68:B3:37:43:
02:1C:59:3E
parm: modeset:Disable/Enable modesetting (int)
lspci:
04:00.0 VGA compatible controller: ASPEED Technology, Inc. ASPEED Graphics Family (rev 30) (prog-if
00 [VGA controller])
DeviceName: Onboard VGA
Subsystem: Super Micro Computer Inc Device 0804
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
<PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at f7000000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at d000 [size=128]
Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/4 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel driver in use: ast
Kernel modules: ast
--
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Frankenstrasse 146, 90461 Nuernberg, Germany
GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman
HRB 36809 (AG Nuernberg)
