Re: [PATCH v3 1/7] dt-bindings: display: panel: Add himax hx83102 panel bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Conor Dooley <conor@xxxxxxxxxx> 于2024年4月27日周六 01:06写道:
>
> On Thu, Apr 25, 2024 at 02:03:24PM +0800, cong yang wrote:
> > Conor Dooley <conor@xxxxxxxxxx> 于2024年4月25日周四 00:55写道:
> > > On Wed, Apr 24, 2024 at 10:30:04AM +0800, Cong Yang wrote:
>
> > > > +++ b/Documentation/devicetree/bindings/display/panel/himax,hx83102.yaml
> > >
> > > Filename matching a compatible please. What you've done here makes it
> > > seem like there's a fallback compatible missing, given this looks like
> > > the LCD panel controller and the starry compatible below is an LCD panel.
> >
> > So change the filename to starry,himax83102-j02.yaml?
>
> IDK chief, are you missing a fallback or not?

Ohn, I see.  Like this. Thanks.

properties:
  compatible:
    items:
      - enum:
          - starry,himax83102-j02
      - const: himax,hx83102

>
> >
> > >
> > > > @@ -0,0 +1,73 @@
> > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > > +%YAML 1.2
> > > > +---
> > > > +$id: http://devicetree.org/schemas/display/panel/himax,hx83102.yaml#
> > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > > +
> > > > +title: Himax HX83102 MIPI-DSI LCD panel controller
>
> Because the title here makes it seem like there should be.
>
> > > > +maintainers:
> > > > +  - Cong Yang <yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
> > > > +
> > > > +allOf:
> > > > +  - $ref: panel-common.yaml#
> > > > +
> > > > +properties:
> > > > +  compatible:
> > > > +    enum:
> > > > +        # STARRY himax83102-j02 10.51" WUXGA TFT LCD panel
> > > > +      - starry,himax83102-j02
> > > > +
> > > > +  reg:
> > > > +    description: the virtual channel number of a DSI peripheral
> > > > +
> > > > +  enable-gpios:
> > > > +    description: a GPIO spec for the enable pin
> > > > +
> > > > +  pp1800-supply:
> > > > +    description: core voltage supply
> > > > +
> > > > +  avdd-supply:
> > > > +    description: phandle of the regulator that provides positive voltage
> > > > +
> > > > +  avee-supply:
> > > > +    description: phandle of the regulator that provides negative voltage
> > > > +
> > > > +  backlight:
> > > > +    description: phandle of the backlight device attached to the panel
> > >
> > > I'm not sure why this was given a description when port or rotation
> > > was not.
> >
> > So change it to backlight: true ?
>
> Sure? It is just a repeat of something already described in
> panel-common.




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux