在 2024/4/10 0:37, T.J. Mercier 写道:
[You don't often get email from tjmercier@xxxxxxxxxx. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
On Tue, Apr 9, 2024 at 12:34 AM Rong Qianfeng <11065417@xxxxxxxx> wrote:
在 2024/4/8 15:58, Christian König 写道:
Am 07.04.24 um 09:50 schrieb Rong Qianfeng:
[SNIP]
Am 13.11.21 um 07:22 schrieb Jianqun Xu:
Add DMA_BUF_IOCTL_SYNC_PARTIAL support for user to sync dma-buf with
offset and len.
You have not given an use case for this so it is a bit hard to
review. And from the existing use cases I don't see why this should
be necessary.
Even worse from the existing backend implementation I don't even see
how drivers should be able to fulfill this semantics.
Please explain further,
Christian.
Here is a practical case:
The user space can allocate a large chunk of dma-buf for
self-management, used as a shared memory pool.
Small dma-buf can be allocated from this shared memory pool and
released back to it after use, thus improving the speed of dma-buf
allocation and release.
Additionally, custom functionalities such as memory statistics and
boundary checking can be implemented in the user space.
Of course, the above-mentioned functionalities require the
implementation of a partial cache sync interface.
Well that is obvious, but where is the code doing that?
You can't send out code without an actual user of it. That will
obviously be rejected.
Regards,
Christian.
In fact, we have already used the user-level dma-buf memory pool in the
camera shooting scenario on the phone.
From the test results, The execution time of the photo shooting
algorithm has been reduced from 3.8s to 3s.
For phones, the (out of tree) Android version of the system heap has a
page pool connected to a shrinker. That allows you to skip page
allocation without fully pinning the memory like you get when
allocating a dma-buf that's way larger than necessary. If it's for a
camera maybe you need physically contiguous memory, but it's also
possible to set that up.
https://android.googlesource.com/kernel/common/+/refs/heads/android14-6.1/drivers/dma-buf/heaps/system_heap.c#377
Thank you for the reminder.
The page pool of the system heap can meet the needs of most scenarios,
but the camera shooting scenario is quite special.
Why the camera shooting scenario needs to have a dma-buf memory pool in
the user-level？
(1) The memory demand is extremely high and time requirements are
stringent.
(2) The memory in the page pool(system heap) is easily reclaimed or used
by other apps.
(3) High concurrent allocation and release (with deferred-free) lead to
high memory usage peaks.
Additionally, after the camera exits, the shared memory pool can be
released, with minimal impact.
Thanks
Rong Qianfeng
To be honest, I didn't understand your concern "...how drivers should be
able to fulfill this semantics." Can you please help explain it in more
detail?
Thanks,
Rong Qianfeng.
Thanks
Rong Qianfeng.
