Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> 于2024年4月3日周三 17:41写道：
>
> On Wed, 3 Apr 2024 at 12:11, Jun Nie <jun.nie@xxxxxxxxxx> wrote:
> >
> > Add variable for slice number of a DSC compression bit stream packet.
> > Its value shall be specified in panel driver, or default value can be set
> > in display controller driver if panel driver does not set it.
>
> This is not a part of the standard. Please justify it.
Right, I read the standard but did not find any details of packet description.
Looks like msm silicon support tuning of number of slice packing per downstream
code.
The slice_per_pkt can be set in the downstream msm device tree. And I test the
values 1 and 2 on vtdr6130 panel and both work. So I guess this is related to
performance or something like that. I will have more test with different panel
to check the impact.
drivers/gpu/drm/panel/panel-raydium-rm692e5.c also mentions to pass new value
to slice_per_pkt.
Hi Konrad,
Do you remember why value 2 is TODO for slice_per_pkt for panel rm692e5?
>
> >
> > Signed-off-by: Jun Nie <jun.nie@xxxxxxxxxx>
> > ---
> > include/drm/display/drm_dsc.h | 4 ++++
> > 1 file changed, 4 insertions(+)
> >
> > diff --git a/include/drm/display/drm_dsc.h b/include/drm/display/drm_dsc.h
> > index bc90273d06a6..4fac0a2746ae 100644
> > --- a/include/drm/display/drm_dsc.h
> > +++ b/include/drm/display/drm_dsc.h
> > @@ -82,6 +82,10 @@ struct drm_dsc_config {
> > * @bits_per_component: Bits per component to code (8/10/12)
> > */
> > u8 bits_per_component;
> > + /**
> > + * @slice_per_pkt: slice number per DSC bit stream packet
> > + */
> > + u8 slice_per_pkt;
> > /**
> > * @convert_rgb:
> > * Flag to indicate if RGB - YCoCg conversion is needed
> >
> > --
> > 2.34.1
> >
>
>
> --
> With best wishes
> Dmitry
