Re: [PATCH 11/12] drm/client: Streamline mode selection debugs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi

Am 04.04.24 um 22:33 schrieb Ville Syrjala:
From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>

Get rid of all the redundant debugs and just wait until the end
to print which mode (and of which type) we picked.

Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
---
  drivers/gpu/drm/drm_client_modeset.c | 65 +++++++++++++---------------
  1 file changed, 31 insertions(+), 34 deletions(-)

diff --git a/drivers/gpu/drm/drm_client_modeset.c b/drivers/gpu/drm/drm_client_modeset.c
index 415d1799337b..ad88c11037d8 100644
--- a/drivers/gpu/drm/drm_client_modeset.c
+++ b/drivers/gpu/drm/drm_client_modeset.c
@@ -408,6 +408,8 @@ static bool drm_client_target_preferred(struct drm_device *dev,
retry:
  	for (i = 0; i < connector_count; i++) {
+		const char *mode_type;
+
  		connector = connectors[i];
if (conn_configured & BIT_ULL(i))
@@ -440,20 +442,20 @@ static bool drm_client_target_preferred(struct drm_device *dev,
  			drm_client_get_tile_offsets(dev, connectors, connector_count, modes, offsets, i,
  						    connector->tile_h_loc, connector->tile_v_loc);
  		}
-		drm_dbg_kms(dev, "looking for cmdline mode on [CONNECTOR:%d:%s]\n",
-			    connector->base.id, connector->name);
- /* got for command line mode first */
+		mode_type = "cmdline";
  		modes[i] = drm_connector_pick_cmdline_mode(connector);
+
  		if (!modes[i]) {
-			drm_dbg_kms(dev, "looking for preferred mode on [CONNECTOR:%d:%s] (tile group: %d)\n",
-				    connector->base.id, connector->name,
-				    connector->tile_group ? connector->tile_group->id : 0);
+			mode_type = "preferred";
  			modes[i] = drm_connector_preferred_mode(connector, width, height);
  		}
-		/* No preferred modes, pick one off the list */
-		if (!modes[i])
+
+		if (!modes[i]) {
+			mode_type = "first";
  			modes[i] = drm_connector_first_mode(connector);
+		}
+
  		/*
  		 * In case of tiled mode if all tiles not present fallback to
  		 * first available non tiled mode.
@@ -468,16 +470,20 @@ static bool drm_client_target_preferred(struct drm_device *dev,
  			    (connector->tile_h_loc == 0 &&
  			     connector->tile_v_loc == 0 &&
  			     !drm_connector_get_tiled_mode(connector))) {
-				drm_dbg_kms(dev, "Falling back to non tiled mode on [CONNECTOR:%d:%s]\n",
-					    connector->base.id, connector->name);
+				mode_type = "non tiled";
  				modes[i] = drm_connector_fallback_non_tiled_mode(connector);
  			} else {
+				mode_type = "tiled";
  				modes[i] = drm_connector_get_tiled_mode(connector);
  			}
  		}
- drm_dbg_kms(dev, "found mode %s\n",
-			    modes[i] ? modes[i]->name : "none");
+		if (!modes[i])
+			mode_type = "no";
+
+		drm_dbg_kms(dev, "[CONNECTOR:%d:%s] found %s mode: %s\n",
+			    connector->base.id, connector->name,
+			    mode_type, modes[i] ? modes[i]->name : "none");

Instead of tracking the whole mode_type thing, maybe just do

if (!modes[i])
    drm_dbg_kms(dev, "[CONNECTOR:%d:%s] found mode: " DRM_MODE_FMT, DRM_MODE_ARG(modes[i]) );

to print the full mode.

If no mode has been found, the code will later print a warning anyway.

Best regards
Thomas

  		conn_configured |= BIT_ULL(i);
  	}
@@ -624,6 +630,7 @@ static bool drm_client_firmware_config(struct drm_client_dev *client,
  		struct drm_connector *connector;
  		struct drm_encoder *encoder;
  		struct drm_crtc *new_crtc;
+		const char *mode_type;
connector = connectors[i]; @@ -673,29 +680,22 @@ static bool drm_client_firmware_config(struct drm_client_dev *client,
  		 */
  		for (j = 0; j < count; j++) {
  			if (crtcs[j] == new_crtc) {
-				drm_dbg_kms(dev, "fallback: cloned configuration\n");
+				drm_dbg_kms(dev, "[CONNECTOR:%d:%s] fallback: cloned configuration\n",
+					    connector->base.id, connector->name);
  				goto bail;
  			}
  		}
- drm_dbg_kms(dev, "looking for cmdline mode on [CONNECTOR:%d:%s]\n",
-			    connector->base.id, connector->name);
-
-		/* go for command line mode first */
+		mode_type = "cmdline";
  		modes[i] = drm_connector_pick_cmdline_mode(connector);
- /* try for preferred next */
  		if (!modes[i]) {
-			drm_dbg_kms(dev, "looking for preferred mode on [CONNECTOR:%d:%s] (tiled? %s)\n",
-				    connector->base.id, connector->name,
-				    str_yes_no(connector->has_tile));
+			mode_type = "preferred";
  			modes[i] = drm_connector_preferred_mode(connector, width, height);
  		}
- /* No preferred mode marked by the EDID? Are there any modes? */
-		if (!modes[i] && !list_empty(&connector->modes)) {
-			drm_dbg_kms(dev, "using first mode listed on [CONNECTOR:%d:%s]\n",
-				    connector->base.id, connector->name);
+		if (!modes[i]) {
+			mode_type = "first";
  			modes[i] = drm_connector_first_mode(connector);
  		}
@@ -706,28 +706,25 @@ static bool drm_client_firmware_config(struct drm_client_dev *client,
  			 * is dodgy. Switch to crtc->state->mode, after taking
  			 * care of the resulting locking/lifetime issues.
  			 */
-			drm_dbg_kms(dev, "looking for current mode on [CONNECTOR:%d:%s]\n",
-				    connector->base.id, connector->name);
+			mode_type = "current";
  			modes[i] = &connector->state->crtc->mode;
  		}
+
  		/*
  		 * In case of tiled modes, if all tiles are not present
  		 * then fallback to a non tiled mode.
  		 */
  		if (connector->has_tile &&
  		    num_tiled_conns < connector->num_h_tile * connector->num_v_tile) {
-			drm_dbg_kms(dev, "Falling back to non tiled mode on [CONNECTOR:%d:%s]\n",
-				    connector->base.id, connector->name);
+			mode_type = "non tiled";
  			modes[i] = drm_connector_fallback_non_tiled_mode(connector);
  		}
  		crtcs[i] = new_crtc;
- drm_dbg_kms(dev, "[CONNECTOR:%d:%s] on [CRTC:%d:%s]: %dx%d%s\n",
+		drm_dbg_kms(dev, "[CONNECTOR::%d:%s] on [CRTC:%d:%s] using %s mode: %s\n",
  			    connector->base.id, connector->name,
-			    connector->state->crtc->base.id,
-			    connector->state->crtc->name,
-			    modes[i]->hdisplay, modes[i]->vdisplay,
-			    modes[i]->flags & DRM_MODE_FLAG_INTERLACE ? "i" : "");
+			    new_crtc->base.id, new_crtc->name,
+			    mode_type, modes[i]->name);
fallback = false;
  		conn_configured |= BIT(i);

--
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Frankenstrasse 146, 90461 Nuernberg, Germany
GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman
HRB 36809 (AG Nuernberg)




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux