Re: [PATCH v3 3/4] drm/mipi-dsi: add mipi_dsi_compression_mode_ext()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2024-04-02 02:51:14, Dmitry Baryshkov wrote:
> Add the extended version of mipi_dsi_compression_mode(). It provides
> a way to specify the algorithm and PPS selector.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
>  drivers/gpu/drm/drm_mipi_dsi.c | 33 +++++++++++++++++++++++++++------
>  include/drm/drm_mipi_dsi.h     |  9 +++++++++
>  2 files changed, 36 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_mipi_dsi.c b/drivers/gpu/drm/drm_mipi_dsi.c
> index 9874ff6d4718..0ecbc811eb7a 100644
> --- a/drivers/gpu/drm/drm_mipi_dsi.c
> +++ b/drivers/gpu/drm/drm_mipi_dsi.c
> @@ -645,19 +645,24 @@ int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi,
>  EXPORT_SYMBOL(mipi_dsi_set_maximum_return_packet_size);
>  
>  /**
> - * mipi_dsi_compression_mode() - enable/disable DSC on the peripheral
> + * mipi_dsi_compression_mode_ext() - enable/disable DSC on the peripheral
>   * @dsi: DSI peripheral device
>   * @enable: Whether to enable or disable the DSC
> + * @algo: Selected algorithm
> + * @pps_selector: The PPS selector

Not a big fan of paraphrasing the parameter name, it adds no value.  How about
describing what this parameter means and what it does?:

	PPS table index to use.  Corresponds to a table pre-programmed on the peripheral
	or a table programmed with &drm_dsc_picture_parameter_set.pps_identifier.

(That should be a valid kernel-doc cross-reference to the field)

>   *
> - * Enable or disable Display Stream Compression on the peripheral using the
> - * default Picture Parameter Set and VESA DSC 1.1 algorithm.
> + * Enable or disable Display Stream Compression on the peripheral.
>   *
>   * Return: 0 on success or a negative error code on failure.
>   */
> -int mipi_dsi_compression_mode(struct mipi_dsi_device *dsi, bool enable)
> +int mipi_dsi_compression_mode_ext(struct mipi_dsi_device *dsi, bool enable,
> +				  enum mipi_dsi_compression_algo algo,
> +				  unsigned int pps_selector)
>  {
> -	/* Note: Needs updating for non-default PPS or algorithm */
> -	u8 tx[2] = { enable << 0, 0 };
> +	u8 data = (enable << 0) |
> +		(algo << 1) |
> +		(pps_selector << 4);

Do we need some size validation (if > 3 return -EINVAL)?  FIELD_PREP() might be
too heavy though.

> +	u8 tx[2] = { data, 0 };
>  	struct mipi_dsi_msg msg = {
>  		.channel = dsi->channel,
>  		.type = MIPI_DSI_COMPRESSION_MODE,
> @@ -668,6 +673,22 @@ int mipi_dsi_compression_mode(struct mipi_dsi_device *dsi, bool enable)
>  
>  	return (ret < 0) ? ret : 0;
>  }
> +EXPORT_SYMBOL(mipi_dsi_compression_mode_ext);
> +
> +/**
> + * mipi_dsi_compression_mode() - enable/disable DSC on the peripheral
> + * @dsi: DSI peripheral device
> + * @enable: Whether to enable or disable the DSC
> + *
> + * Enable or disable Display Stream Compression on the peripheral using the
> + * default Picture Parameter Set and VESA DSC 1.1 algorithm.
> + *
> + * Return: 0 on success or a negative error code on failure.
> + */
> +int mipi_dsi_compression_mode(struct mipi_dsi_device *dsi, bool enable)
> +{
> +	return mipi_dsi_compression_mode_ext(dsi, enable, 0, MIPI_DSI_COMPRESSION_DSC);

I hope the compiler complains here that it should be MIPI_DSI_COMPRESSION_DSC,0

(Enum algo first, int pps_selector last)

> +}
>  EXPORT_SYMBOL(mipi_dsi_compression_mode);
>  
>  /**
> diff --git a/include/drm/drm_mipi_dsi.h b/include/drm/drm_mipi_dsi.h
> index 3011d33eccbd..78cb7b688b1d 100644
> --- a/include/drm/drm_mipi_dsi.h
> +++ b/include/drm/drm_mipi_dsi.h
> @@ -226,6 +226,12 @@ static inline int mipi_dsi_pixel_format_to_bpp(enum mipi_dsi_pixel_format fmt)
>  	return -EINVAL;
>  }
>  
> +enum mipi_dsi_compression_algo {
> +	MIPI_DSI_COMPRESSION_DSC = 0,

Add 1.1?  Or does it also allow 1.2 (when the version is also set via PPS)?

> +	MIPI_DSI_COMPRESSION_VENDOR = 3,
> +	/* other two values are reserved, DSI 1.3 */
> +};
> +
>  struct mipi_dsi_device *
>  mipi_dsi_device_register_full(struct mipi_dsi_host *host,
>  			      const struct mipi_dsi_device_info *info);
> @@ -242,6 +248,9 @@ int mipi_dsi_turn_on_peripheral(struct mipi_dsi_device *dsi);
>  int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi,
>  					    u16 value);
>  int mipi_dsi_compression_mode(struct mipi_dsi_device *dsi, bool enable);
> +int mipi_dsi_compression_mode_ext(struct mipi_dsi_device *dsi, bool enable,
> +				  unsigned int pps_selector,
> +				  enum mipi_dsi_compression_algo algo);

Oh, this declaration is inverse from the definition...

- Marijn

>  int mipi_dsi_picture_parameter_set(struct mipi_dsi_device *dsi,
>  				   const struct drm_dsc_picture_parameter_set *pps);
>  
> 
> -- 
> 2.39.2
> 



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux