Hi, Jaak,
I'm still here as a boring man. :)
Have you ever tested whether using "fs_initcall(sysfb_init)" works
fine on your machine?
Huacai
On Wed, Jan 24, 2024 at 5:21 AM Jaak Ristioja <jaak@xxxxxxxxxxx> wrote:
>
> Hi,
>
> I apologize for not finding the time to test this earlier.
>
> On 11.12.23 05:08, Huacai Chen wrote:
> > And Jaak, could you please test with the below patch (but keep the
> > original order in Makefile) and then give me the dmesg output?
> >
> > diff --git a/drivers/video/aperture.c b/drivers/video/aperture.c
> > index 561be8feca96..cc2e39fb98f5 100644
> > --- a/drivers/video/aperture.c
> > +++ b/drivers/video/aperture.c
> > @@ -350,21 +350,29 @@ int
> > aperture_remove_conflicting_pci_devices(struct pci_dev *pdev, const
> > char *na
> > resource_size_t base, size;
> > int bar, ret = 0;
> >
> > - if (pdev == vga_default_device())
> > + printk("DEBUG: remove 1\n");
> > +
> > + if (pdev == vga_default_device()) {
> > + printk("DEBUG: primary = true\n");
> > primary = true;
> > + }
> >
> > - if (primary)
> > + if (primary) {
> > + printk("DEBUG: disable sysfb\n");
> > sysfb_disable();
> > + }
> >
> > for (bar = 0; bar < PCI_STD_NUM_BARS; ++bar) {
> > if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM))
> > continue;
> >
> > + printk("DEBUG: remove 2\n");
> > base = pci_resource_start(pdev, bar);
> > size = pci_resource_len(pdev, bar);
> > aperture_detach_devices(base, size);
> > }
> >
> > + printk("DEBUG: remove 3\n");
> > /*
> > * If this is the primary adapter, there could be a VGA device
> > * that consumes the VGA framebuffer I/O range. Remove this
> >
> > [1] https://lore.kernel.org/lkml/170222766284.86103.11020060769330721008@xxxxxxxxxxxxx/T/#u
>
> Copy-pasting this from the e-mail body didn't work well, but I applied
> the changes manually to a 6.5.9 kernel without any of the other patches.
> Here's the relevant dmesg output on the Lenovo L570:
>
> ...
> [ 2.953405] ACPI: bus type drm_connector registered
> [ 2.954014] i915 0000:00:02.0: [drm] VT-d active for gfx access
> [ 2.954018] DEBUG: remove 1
> [ 2.954020] DEBUG: remove 2
> [ 2.954021] DEBUG: remove 2
> [ 2.954023] DEBUG: remove 3
> [ 2.954029] resource: resource sanity check: requesting [mem
> 0x00000000e0000000-0x00000000efffffff], which spans more than BOOTFB
> [mem 0xe0000000-0xe012bfff]
> [ 2.954035] caller i915_ggtt_init_hw+0x88/0x120 mapping multiple BARs
> [ 2.954061] i915 0000:00:02.0: [drm] Using Transparent Hugepages
> [ 2.955103] Loading firmware: i915/kbl_dmc_ver1_04.bin
> [ 2.955384] i915 0000:00:02.0: [drm] Finished loading DMC firmware
> i915/kbl_dmc_ver1_04.bin (v1.4)
> ...
> [ 4.145013] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on
> minor 0
> [ 4.147101] ACPI: video: Video Device [GFX0] (multi-head: yes rom:
> no post: no)
> [ 4.147244] input: Video Bus as
> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
> [ 4.147410] [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 1
> [ 4.147420] usbcore: registered new interface driver udl
> [ 4.147500] [drm] Initialized simpledrm 1.0.0 20200625 for
> simple-framebuffer.0 on minor 2
> [ 4.148643] Console: switching to colour frame buffer device 80x30
> [ 4.153216] simple-framebuffer simple-framebuffer.0: [drm] fb0:
> simpledrmdrmfb frame buffer device
> [ 4.154043] loop: module loaded
> [ 4.156017] ahci 0000:00:17.0: version 3.0
> [ 4.157373] i915 0000:00:02.0: [drm] fb1: i915drmfb frame buffer device
> ...
>
> J
>
