Il 15/03/24 08:29, Shuijing Li ha scritto:
This patch correct calculation formula of PHY timing.
Make actual phy timing more accurate.
More accurate in which cases? By how much? On which SoC(s)?
I agree about those changes if those are improving the PHY timing, but
can you please document what's going on?
Thanks,
Angelo
Signed-off-by: Shuijing Li <shuijing.li@xxxxxxxxxxxx>
---
drivers/gpu/drm/mediatek/mtk_dsi.c | 33 +++++++++++++++---------------
1 file changed, 17 insertions(+), 16 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index a2fdfc8ddb15..d1bd7d671880 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -235,22 +235,23 @@ static void mtk_dsi_phy_timconfig(struct mtk_dsi *dsi)
u32 data_rate_mhz = DIV_ROUND_UP(dsi->data_rate, 1000000);
struct mtk_phy_timing *timing = &dsi->phy_timing;
- timing->lpx = (60 * data_rate_mhz / (8 * 1000)) + 1;
- timing->da_hs_prepare = (80 * data_rate_mhz + 4 * 1000) / 8000;
- timing->da_hs_zero = (170 * data_rate_mhz + 10 * 1000) / 8000 + 1 -
- timing->da_hs_prepare;
- timing->da_hs_trail = timing->da_hs_prepare + 1;
-
- timing->ta_go = 4 * timing->lpx - 2;
- timing->ta_sure = timing->lpx + 2;
- timing->ta_get = 4 * timing->lpx;
- timing->da_hs_exit = 2 * timing->lpx + 1;
-
- timing->clk_hs_prepare = 70 * data_rate_mhz / (8 * 1000);
- timing->clk_hs_post = timing->clk_hs_prepare + 8;
- timing->clk_hs_trail = timing->clk_hs_prepare;
- timing->clk_hs_zero = timing->clk_hs_trail * 4;
- timing->clk_hs_exit = 2 * timing->clk_hs_trail;
+ timing->lpx = (80 * data_rate_mhz / (8 * 1000)) + 1;
+ timing->da_hs_prepare = (59 * data_rate_mhz + 4 * 1000) / 8000 + 1;
+ timing->da_hs_zero = (163 * data_rate_mhz + 11 * 1000) / 8000 + 1 -
+ timing->da_hs_prepare;
+ timing->da_hs_trail = (78 * data_rate_mhz + 7 * 1000) / 8000 + 1;
+
+ timing->ta_go = 4 * timing->lpx;
+ timing->ta_sure = 3 * timing->lpx / 2;
+ timing->ta_get = 5 * timing->lpx;
+ timing->da_hs_exit = (118 * data_rate_mhz / (8 * 1000)) + 1;
+
+ timing->clk_hs_prepare = (57 * data_rate_mhz / (8 * 1000)) + 1;
+ timing->clk_hs_post = (65 * data_rate_mhz + 53 * 1000) / 8000 + 1;
+ timing->clk_hs_trail = (78 * data_rate_mhz + 7 * 1000) / 8000 + 1;
+ timing->clk_hs_zero = (330 * data_rate_mhz / (8 * 1000)) + 1 -
+ timing->clk_hs_prepare;
+ timing->clk_hs_exit = (118 * data_rate_mhz / (8 * 1000)) + 1;
timcon0 = timing->lpx | timing->da_hs_prepare << 8 |
timing->da_hs_zero << 16 | timing->da_hs_trail << 24;
