From: Ohad Sharabi <osharabi@xxxxxxxxx>
Firmware files below 1.11 were never released to customers so no need
to support them externally.
Signed-off-by: Ohad Sharabi <osharabi@xxxxxxxxx>
Reviewed-by: Oded Gabbay <ogabbay@xxxxxxxxxx>
Signed-off-by: Oded Gabbay <ogabbay@xxxxxxxxxx>
---
drivers/accel/habanalabs/gaudi2/gaudi2.c | 47 ++----------------------
1 file changed, 3 insertions(+), 44 deletions(-)
diff --git a/drivers/accel/habanalabs/gaudi2/gaudi2.c b/drivers/accel/habanalabs/gaudi2/gaudi2.c
index 5be3432d29b3..c99edbf9f4ca 100644
--- a/drivers/accel/habanalabs/gaudi2/gaudi2.c
+++ b/drivers/accel/habanalabs/gaudi2/gaudi2.c
@@ -6314,26 +6314,6 @@ static void gaudi2_execute_hard_reset(struct hl_device *hdev)
WREG32(mmPSOC_RESET_CONF_SW_ALL_RST, 1);
}
-static int gaudi2_get_soft_rst_done_indication(struct hl_device *hdev, u32 poll_timeout_us)
-{
- int i, rc = 0;
- u32 reg_val;
-
- for (i = 0 ; i < GAUDI2_RESET_POLL_CNT ; i++)
- rc = hl_poll_timeout(
- hdev,
- mmCPU_RST_STATUS_TO_HOST,
- reg_val,
- reg_val == CPU_RST_STATUS_SOFT_RST_DONE,
- 1000,
- poll_timeout_us);
-
- if (rc)
- dev_err(hdev->dev, "Timeout while waiting for FW to complete soft reset (0x%x)\n",
- reg_val);
- return rc;
-}
-
/**
* gaudi2_execute_soft_reset - execute soft reset by driver/FW
*
@@ -6346,23 +6326,8 @@ static int gaudi2_get_soft_rst_done_indication(struct hl_device *hdev, u32 poll_
static int gaudi2_execute_soft_reset(struct hl_device *hdev, bool driver_performs_reset,
u32 poll_timeout_us)
{
- int rc;
-
- if (!driver_performs_reset) {
- if (hl_is_fw_sw_ver_below(hdev, 1, 10)) {
- /* set SP to indicate reset request sent to FW */
- WREG32(mmCPU_RST_STATUS_TO_HOST, CPU_RST_STATUS_NA);
-
- WREG32(mmGIC_HOST_SOFT_RST_IRQ_POLL_REG,
- gaudi2_irq_map_table[GAUDI2_EVENT_CPU_SOFT_RESET].cpu_id);
-
- /* wait for f/w response */
- rc = gaudi2_get_soft_rst_done_indication(hdev, poll_timeout_us);
- } else {
- rc = hl_fw_send_soft_reset(hdev);
- }
- return rc;
- }
+ if (!driver_performs_reset)
+ return hl_fw_send_soft_reset(hdev);
/* Block access to engines, QMANs and SM during reset, these
* RRs will be reconfigured after soft reset.
@@ -8165,13 +8130,7 @@ static void gaudi2_ack_module_razwi_event_handler(struct hl_device *hdev,
}
hbw_rtr_id = gaudi2_tpc_initiator_hbw_rtr_id[module_idx];
-
- if (hl_is_fw_sw_ver_below(hdev, 1, 9) &&
- !hdev->asic_prop.fw_security_enabled &&
- ((module_idx == 0) || (module_idx == 1)))
- lbw_rtr_id = DCORE0_RTR0;
- else
- lbw_rtr_id = gaudi2_tpc_initiator_lbw_rtr_id[module_idx];
+ lbw_rtr_id = gaudi2_tpc_initiator_lbw_rtr_id[module_idx];
break;
case RAZWI_MME:
sprintf(initiator_name, "MME_%u", module_idx);
--
2.34.1
