Re: [PATCH v3 2/3] drm/msm/dpu: split dpu_encoder_wait_for_event into two functions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, 25 Feb 2024 at 21:49, Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx> wrote:
>
>
>
> On 2/25/2024 6:12 AM, Dmitry Baryshkov wrote:
> > Stop multiplexing several events via the dpu_encoder_wait_for_event()
> > function. Split it into two distinct functions two allow separate
> > handling of those events.
> >
>
> I understand the idea but would handling of those events be really distinct?

We are interested in capturing the state after the first
wait_for_commit_done() timeout. The wait_for_tx_complete doesn't need
such handling. Even if we were to handle it in some way, it would be a
different conditional.

Last but not least, I don't like multiplexing just for the sake of it.
There is nearly no common behaviour.

>
> Like if wait_for_commit_done timedout or wait_for_tx_complete timedout,
> the handling will be similar from my PoV.
>
> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> > ---
> >   drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 74 +++++++++++++++++++++--------
> >   drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h | 22 ++-------
> >   drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c     |  2 +-
> >   drivers/gpu/drm/msm/msm_drv.h               | 10 ----
> >   4 files changed, 59 insertions(+), 49 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > index 194dbb08331d..30f349c8a1e5 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > @@ -1282,7 +1282,7 @@ static void dpu_encoder_virt_atomic_disable(struct drm_encoder *drm_enc,
> >       trace_dpu_enc_disable(DRMID(drm_enc));
> >
> >       /* wait for idle */
> > -     dpu_encoder_wait_for_event(drm_enc, MSM_ENC_TX_COMPLETE);
> > +     dpu_encoder_wait_for_tx_complete(drm_enc);
> >
> >       dpu_encoder_resource_control(drm_enc, DPU_ENC_RC_EVENT_PRE_STOP);
> >
> > @@ -2402,10 +2402,23 @@ struct drm_encoder *dpu_encoder_init(struct drm_device *dev,
> >       return &dpu_enc->base;
> >   }
> >
> > -int dpu_encoder_wait_for_event(struct drm_encoder *drm_enc,
> > -     enum msm_event_wait event)
> > +/**
> > + * dpu_encoder_wait_for_commit_done() - Wait for encoder to flush pending state
> > + * @drm_enc: encoder pointer
> > + *
> > + * Wait for hardware to have flushed the current pending frames to hardware at
> > + * a vblank or ctl_start Encoders will map this differently depending on the
> > + * panel type.
> > + *
>
> Missing a '.' between ctl_start and Encoder?

Ack. Also I should drop the leftovers afterwards.

>
> > + * MSM_ENC_TX_COMPLETE -  Wait for the hardware to transfer all the pixels to
> > + *                        the panel. Encoders will map this differently
> > + *                        depending on the panel type.
> > + *                        vid mode -> vsync_irq
> > + *                        cmd mode -> pp_done
> > + * Return: 0 on success, -EWOULDBLOCK if already signaled, error otherwise
> > + */
> > +int dpu_encoder_wait_for_commit_done(struct drm_encoder *drm_enc)
> >   {
> > -     int (*fn_wait)(struct dpu_encoder_phys *phys_enc) = NULL;
> >       struct dpu_encoder_virt *dpu_enc = NULL;
> >       int i, ret = 0;
> >
> > @@ -2419,23 +2432,46 @@ int dpu_encoder_wait_for_event(struct drm_encoder *drm_enc,
> >       for (i = 0; i < dpu_enc->num_phys_encs; i++) {
> >               struct dpu_encoder_phys *phys = dpu_enc->phys_encs[i];
> >
> > -             switch (event) {
> > -             case MSM_ENC_COMMIT_DONE:
> > -                     fn_wait = phys->ops.wait_for_commit_done;
> > -                     break;
> > -             case MSM_ENC_TX_COMPLETE:
> > -                     fn_wait = phys->ops.wait_for_tx_complete;
> > -                     break;
> > -             default:
> > -                     DPU_ERROR_ENC(dpu_enc, "unknown wait event %d\n",
> > -                                     event);
> > -                     return -EINVAL;
> > +             if (phys->ops.wait_for_commit_done) {
> > +                     DPU_ATRACE_BEGIN("wait_for_commit_done");
> > +                     ret = phys->ops.wait_for_commit_done(phys);
> > +                     DPU_ATRACE_END("wait_for_commit_done");
> > +                     if (ret)
> > +                             return ret;
> >               }
> > +     }
> > +
> > +     return ret;
> > +}
> > +
> > +/**
> > + * dpu_encoder_wait_for_tx_complete() - Wait for encoder to transfer pixels to panel
> > + * @drm_enc: encoder pointer
> > + *
> > + * Wait for the hardware to transfer all the pixels to the panel. Encoders will
> > + * map this differently depending on the panel type.
> > + *
> > + * Return: 0 on success, -EWOULDBLOCK if already signaled, error otherwise
> > + */
> > +int dpu_encoder_wait_for_tx_complete(struct drm_encoder *drm_enc)
> > +{
> > +     struct dpu_encoder_virt *dpu_enc = NULL;
> > +     int i, ret = 0;
> > +
> > +     if (!drm_enc) {
> > +             DPU_ERROR("invalid encoder\n");
> > +             return -EINVAL;
> > +     }
> > +     dpu_enc = to_dpu_encoder_virt(drm_enc);
> > +     DPU_DEBUG_ENC(dpu_enc, "\n");
> > +
> > +     for (i = 0; i < dpu_enc->num_phys_encs; i++) {
> > +             struct dpu_encoder_phys *phys = dpu_enc->phys_encs[i];
> >
> > -             if (fn_wait) {
> > -                     DPU_ATRACE_BEGIN("wait_for_completion_event");
> > -                     ret = fn_wait(phys);
> > -                     DPU_ATRACE_END("wait_for_completion_event");
> > +             if (phys->ops.wait_for_tx_complete) {
> > +                     DPU_ATRACE_BEGIN("wait_for_tx_complete");
> > +                     ret = phys->ops.wait_for_tx_complete(phys);
> > +                     DPU_ATRACE_END("wait_for_tx_complete");
> >                       if (ret)
> >                               return ret;
> >               }
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
> > index fe6b1d312a74..0c928d1876e4 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
> > @@ -93,25 +93,9 @@ void dpu_encoder_kickoff(struct drm_encoder *encoder);
> >    */
> >   int dpu_encoder_vsync_time(struct drm_encoder *drm_enc, ktime_t *wakeup_time);
> >
> > -/**
> > - * dpu_encoder_wait_for_event - Waits for encoder events
> > - * @encoder: encoder pointer
> > - * @event:      event to wait for
> > - * MSM_ENC_COMMIT_DONE -  Wait for hardware to have flushed the current pending
> > - *                        frames to hardware at a vblank or ctl_start
> > - *                        Encoders will map this differently depending on the
> > - *                        panel type.
> > - *                     vid mode -> vsync_irq
> > - *                        cmd mode -> ctl_start
> > - * MSM_ENC_TX_COMPLETE -  Wait for the hardware to transfer all the pixels to
> > - *                        the panel. Encoders will map this differently
> > - *                        depending on the panel type.
> > - *                        vid mode -> vsync_irq
> > - *                        cmd mode -> pp_done
> > - * Returns: 0 on success, -EWOULDBLOCK if already signaled, error otherwise
> > - */
> > -int dpu_encoder_wait_for_event(struct drm_encoder *drm_encoder,
> > -                                             enum msm_event_wait event);
> > +int dpu_encoder_wait_for_commit_done(struct drm_encoder *drm_encoder);
> > +
> > +int dpu_encoder_wait_for_tx_complete(struct drm_encoder *drm_encoder);
> >
> >   /*
> >    * dpu_encoder_get_intf_mode - get interface mode of the given encoder
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> > index d6412395bacc..26b5e54031d9 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> > @@ -476,7 +476,7 @@ static void dpu_kms_wait_for_commit_done(struct msm_kms *kms,
> >                * mode panels. This may be a no-op for command mode panels.
> >                */
> >               trace_dpu_kms_wait_for_commit_done(DRMID(crtc));
> > -             ret = dpu_encoder_wait_for_event(encoder, MSM_ENC_COMMIT_DONE);
> > +             ret = dpu_encoder_wait_for_commit_done(encoder);
> >               if (ret && ret != -EWOULDBLOCK) {
> >                       DPU_ERROR("wait for commit done returned %d\n", ret);
> >                       break;
> > diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
> > index 762e13e2df74..91cf57f72321 100644
> > --- a/drivers/gpu/drm/msm/msm_drv.h
> > +++ b/drivers/gpu/drm/msm/msm_drv.h
> > @@ -74,16 +74,6 @@ enum msm_dsi_controller {
> >   #define MSM_GPU_MAX_RINGS 4
> >   #define MAX_H_TILES_PER_DISPLAY 2
> >
> > -/**
> > - * enum msm_event_wait - type of HW events to wait for
> > - * @MSM_ENC_COMMIT_DONE - wait for the driver to flush the registers to HW
> > - * @MSM_ENC_TX_COMPLETE - wait for the HW to transfer the frame to panel
> > - */
> > -enum msm_event_wait {
> > -     MSM_ENC_COMMIT_DONE = 0,
> > -     MSM_ENC_TX_COMPLETE,
> > -};
> > -
> >   /**
> >    * struct msm_display_topology - defines a display topology pipeline
> >    * @num_lm:       number of layer mixers used
> >



-- 
With best wishes
Dmitry



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux