On Thu, 22 Feb 2024 at 01:19, Bjorn Andersson <quic_bjorande@xxxxxxxxxxx> wrote:
>
> With the ADSP remoteproc loaded pmic_glink can be introduced and wired
> up to provide role and orientation switching signals.
>
> Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 48 +++++++++++++++++++++++++++-
> 1 file changed, 47 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> index ab498494caea..079bf43b14cc 100644
> --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> @@ -121,6 +121,41 @@ debug_vm_mem: debug-vm@d0600000 {
> };
> };
>
> + pmic-glink {
> + compatible = "qcom,qcm6490-pmic-glink", "qcom,pmic-glink";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + connector@0 {
> + compatible = "usb-c-connector";
> + reg = <0>;
> + power-role = "dual";
> + data-role = "dual";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + pmic_glink_hs_in: endpoint {
> + remote-endpoint = <&usb_1_dwc3_hs>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + pmic_glink_ss_in: endpoint {
> + remote-endpoint = <&usb_1_dwc3_ss>;
This should be connected to the QMP PHY rather than to the USB host.
Also it might be better to squash this patch with the patch 8. Or at
least to get redriver into the picture in this patch (and keep only
display-related parts in that patch).
> + };
> + };
> + };
> + };
> + };
> +
> vph_pwr: vph-pwr-regulator {
> compatible = "regulator-fixed";
> regulator-name = "vph_pwr";
> @@ -476,7 +511,16 @@ &usb_1 {
> };
>
> &usb_1_dwc3 {
> - dr_mode = "peripheral";
> + dr_mode = "otg";
> + usb-role-switch;
> +};
> +
> +&usb_1_dwc3_hs {
> + remote-endpoint = <&pmic_glink_hs_in>;
> +};
> +
> +&usb_1_dwc3_ss {
> + remote-endpoint = <&pmic_glink_ss_in>;
> };
>
> &usb_1_hsphy {
> @@ -491,6 +535,8 @@ &usb_1_qmpphy {
> vdda-phy-supply = <&vreg_l6b_1p2>;
> vdda-pll-supply = <&vreg_l1b_0p912>;
>
> + orientation-switch;
> +
> status = "okay";
> };
>
>
> --
> 2.25.1
>
--
With best wishes
Dmitry
