[PATCH v2] accel/ivpu: Don't enable any tiles by default on VPU40xx

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Andrzej Kacprowski <Andrzej.Kacprowski@xxxxxxxxx>

There is no point in requesting 1 tile on VPU40xx as the FW will
probably need more tiles to run workloads, so it will have to
reconfigure PLL anyway. Don't enable any tiles and allow the FW to
perform initial tile configuration.

This improves NPU boot stability as the tiles are always enabled only
by the FW from the same initial state.

Fixes: 79cdc56c4a54 ("accel/ivpu: Add initial support for VPU 4")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@xxxxxxxxx>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@xxxxxxxxxxxxxxx>
---
 drivers/accel/ivpu/ivpu_hw_40xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/accel/ivpu/ivpu_hw_40xx.c b/drivers/accel/ivpu/ivpu_hw_40xx.c
index 1c995307c113..a1523d0b1ef3 100644
--- a/drivers/accel/ivpu/ivpu_hw_40xx.c
+++ b/drivers/accel/ivpu/ivpu_hw_40xx.c
@@ -24,7 +24,7 @@
 #define SKU_HW_ID_SHIFT              16u
 #define SKU_HW_ID_MASK               0xffff0000u
 
-#define PLL_CONFIG_DEFAULT           0x1
+#define PLL_CONFIG_DEFAULT           0x0
 #define PLL_CDYN_DEFAULT             0x80
 #define PLL_EPP_DEFAULT              0x80
 #define PLL_REF_CLK_FREQ	     (50 * 1000000)
-- 
2.43.0




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux