On Mon, Feb 19, 2024 at 3:00 AM Matt Coster <Matt.Coster@xxxxxxxxxx> wrote:
>
> Hi Adam,
>
> On 18/02/2024 23:26, Adam Ford wrote:
> > On Fri, Feb 16, 2024 at 8:14 AM Maxime Ripard <mripard@xxxxxxxxxx> wrote:
> >>
> >> On Fri, Feb 16, 2024 at 09:13:14AM +0000, Biju Das wrote:
> >>> Hi Maxime Ripard,
> >>>
> >>>> -----Original Message-----
> >>>> From: Maxime Ripard <mripard@xxxxxxxxxx>
> >>>> Sent: Friday, February 16, 2024 9:05 AM
> >>>> Subject: Re: RE: [PATCH v2] drm/imagination: DRM_POWERVR should depend on
> >>>> ARCH_K3
> >>>>
> >>>> On Fri, Feb 16, 2024 at 08:47:46AM +0000, Biju Das wrote:
> >>>>> Hi Adam Ford,
> >>>>>
> >>>>>> -----Original Message-----
> >>>>>> From: Adam Ford <aford173@xxxxxxxxx>
> >>>>>> Sent: Thursday, February 15, 2024 11:36 PM
> >>>>>> Subject: Re: [PATCH v2] drm/imagination: DRM_POWERVR should depend
> >>>>>> on
> >>>>>> ARCH_K3
> >>>>>>
> >>>>>> On Thu, Feb 15, 2024 at 11:22 AM Adam Ford <aford173@xxxxxxxxx> wrote:
> >>>>>>>
> >>>>>>> On Thu, Feb 15, 2024 at 11:10 AM Adam Ford <aford173@xxxxxxxxx>
> >>>> wrote:
> >>>>>>>>
> >>>>>>>> On Thu, Feb 15, 2024 at 10:54 AM Geert Uytterhoeven
> >>>>>>>> <geert@xxxxxxxxxxxxxx> wrote:
> >>>>>>>>>
> >>>>>>>>> Hi Maxime,
> >>>>>>>>>
> >>>>>>>>> On Thu, Feb 15, 2024 at 5:18 PM Maxime Ripard
> >>>>>>>>> <mripard@xxxxxxxxxx>
> >>>>>> wrote:
> >>>>>>>>>> On Thu, Feb 15, 2024 at 01:50:09PM +0100, Geert Uytterhoeven
> >>>>>> wrote:
> >>>>>>>>>>> Using the Imagination Technologies PowerVR Series 6 GPU
> >>>>>>>>>>> requires a proprietary firmware image, which is currently
> >>>>>>>>>>> only available for Texas Instruments K3 AM62x SoCs. Hence
> >>>>>>>>>>> add a dependency on ARCH_K3, to prevent asking the user
> >>>>>>>>>>> about this driver when configuring a kernel without Texas
> >>>>>>>>>>> Instruments K3
> >>>>>> Multicore SoC support.
> >>>>>>>>>>
> >>>>>>>>>> This wasn't making sense the first time you sent it, and now
> >>>>>>>>>> that commit log is just plain wrong. We have firmwares for
> >>>>>>>>>> the G6110, GX6250, GX6650, BXE-4-32, and BXS-4-64 models,
> >>>>>>>>>> which can be found on (at least) Renesas, Mediatek,
> >>>>>>>>>> Rockchip, TI and StarFive, so across three
> >>>>>>>>>
> >>>>>>>>> I am so happy to be proven wrong!
> >>>>>>>>> Yeah, GX6650 is found on e.g. R-Car H3, and GX6250 on e.g.
> >>>>>>>>> R-Car M3-
> >>>>>> W.
> >>>>>>>>>
> >>>>>>>>>> architectures and 5 platforms. In two months.
> >>>>>>>>>
> >>>>>>>>> That sounds like great progress, thanks a lot!
> >>>>>>>>>
> >>>>>>>> Geert,
> >>>>>>>>
> >>>>>>>>> Where can I find these firmwares? Linux-firmware[1] seems to
> >>>>>>>>> lack all but the original K3 AM62x one.
> >>>>>>>>
> >>>>>>>> I think PowerVR has a repo [1], but the last time I checked it,
> >>>>>>>> the BVNC for the firmware didn't match what was necessary for
> >>>>>>>> the GX6250 on the RZ/G2M. I can't remember what the
> >>>>>>>> corresponding R-Car3 model is. I haven't tried recently because
> >>>>>>>> I was told more documentation for firmware porting would be
> >>>>>>>> delayed until everything was pushed into the kernel and Mesa.
> >>>>>>>> Maybe there is a better repo and/or newer firmware somewhere else.
> >>>>>>>>
> >>>>>>> I should have doubled checked the repo contents before I sent my
> >>>>>>> last e-mail , but it appears the firmware [2] for the RZ/G2M,
> >>>>>>> might be present now. I don't know if there are driver updates
> >>>>>>> necessary. I checked my e-mails, but I didn't see any
> >>>>>>> notification, or I would have tried it earlier. Either way, thank
> >>>>>>> you Frank for adding it. I'll try to test when I have some time.
> >>>>>>>
> >>>>>>
> >>>>>> I don't have the proper version of Mesa setup yet, but for what it's
> >>>>>> worth, the firmware loads without error, and it doesn't hang.
> >>>>>
> >>>>> Based on [1] and [2],
> >>>>>
> >>>>> kmscube should work on R-Car as it works on RZ/G2L with panfrost as
> >>>>> earlier version of RZ/G2L which uses drm based on RCar-Du, later changed
> >>>> to rzg2l-du.
> >>>>
> >>>> IIRC, the mesa support isn't there yet for kmscube to start.
> >>>
> >>> What about glmark2? I tested glmark2 as well.
> >>
> >> It's not really a matter of kmscube itself, but the interaction with the
> >> compositor entirely. You can run a headless vulkan rendering, but an
> >> application that renders to a window won't work.
> >
> > I have made a little progress. I have Ubuntu running on an RZ/G2M
> > (Rogue GX6250) with a device tree configuring the GPU and the GPU
> > loads with firmware.
> >
> > powervr fd000000.gpu: [drm] loaded firmware powervr/rogue_4.45.2.58_v1.fw
> > powervr fd000000.gpu: [drm] FW version v1.0 (build 6513336 OS)
> > [drm] Initialized powervr 1.0.0 20230904 for fd000000.gpu on minor 0
> >
> > drmdevice lists card0 and renderD128
> > --- Checking the number of DRM device available ---
> > --- Devices reported 2 ---
> > --- Retrieving devices information (PCI device revision is ignored) ---
> > device[0]
> > +-> available_nodes 0x05
> > +-> nodes
> > | +-> nodes[0] /dev/dri/card0
> > | +-> nodes[2] /dev/dri/renderD128
> > +-> bustype 0002
> > | +-> platform
> > | +-> fullname /soc/gpu@fd000000
> > +-> deviceinfo
> > +-> platform
> > +-> compatible
> > renesas,r8a774a1-gpu
> > img,img-axe
> >
> > There is more to this dump, but it seems to repeat. I wanted to show
> > that it seems like it's trying to work.
> >
> > I think I need to modify the powervr code in mesa to recognize the
> > renesas,r8a774a1-gpu and associate it with the rcar-du, but I am not
> > sure, and I am hoping someone might be able to provide some guidance,
> > since I think I am missing something somewhere. I modified
> > pvr_device.c in the mesa driver to attempt do this:
> >
> > /* This is the list of supported DRM render/display driver configs. */
> > static const struct pvr_drm_device_config pvr_drm_configs[] = {
> > DEF_CONFIG("mediatek,mt8173-gpu", "mediatek-drm"),
> > DEF_CONFIG("ti,am62-gpu", "ti,am625-dss"),
> > DEF_CONFIG("renesas,r8a774a1-gpu", "rcar-du"),
> > };
> >
> > When I run modetest -M rcar-du, I can see the encoders and connectors
> > and I can display test patterns, so the rcar-du is working.
> >
> > I built Mesa 24.0.1 with the following options:
> >
> > meson setup builddir -Dvulkan-drivers=imagination-experimental
> > -Dimagination-srv=true -Dtools=all -Dgallium-drivers=zink,kmsro,swrast
> >
> > I have tried to set PVR_I_WANT_A_BROKEN_VULKAN_DRIVER=1 the Mesa
> > documentation for the powerVR, and I have exported the variable for
> > VK_ICD_FILENAMES to point to the powervr json file.
> >
> > when I try to run glmark2-drm, I was expecting the GL reddered to be
> > the powervr, but it keeps using the
> > GL_RENDERER: llvmpipe (LLVM 15.0.7, 128 bits)
> >
> > I realize this driver is still in its infancy, but I was hoping
> > someone could give me some guidance to let me know if the work to do
> > is on the Mesa side or the rcar-du driver side, or something else.
> >
> > I rebuilt both libdrm and mesa. While I don't get any errors, I also
> > don't get the hardware acceleration I was hoping for.
> >
> > I even tried PVR_I_WANT_A_BROKEN_VULKAN_DRIVER=1
> > MESA_LOADER_DRIVER_OVERRIDE=zink MESA_DEBUG=contect glmark2-drm
> >
> > ...but it only renders with llvmpipe
> >
> > glmark2 2023.01
> > =======================================================
> > OpenGL Information
> > GL_VENDOR: Mesa
> > GL_RENDERER: llvmpipe (LLVM 15.0.7, 128 bits)
> > GL_VERSION: 4.5 (Compatibility Profile) Mesa 24.0.1
> > Surface Config: buf=32 r=8 g=8 b=8 a=8 depth=32 stencil=0 samples=0
> > Surface Size: 3840x2160 fullscreen
> >
> >
> > I am not as familiar with the Mesa side, but if I can get this working
> > to a point where something is rendered, even if it's not 100%
> > compliant, I'd like to push patches to the kernel and/or Mesa if
> > necessary.
> >
> > adam
> >
> >
> >
> >
> >>
> >> Maxime
>
> I suggest you try running Vulkan demos (we use Sascha Willems’ [1])
> instead of GL at this stage. Support for Zink is currently under heavy
> development so you may have trouble differentiating between issues with
> your kernel changes and the incompleteness in Mesa.
I hacked the look-up-tables in the Mesa PowerVR driver to match the
values of the other GX6250. I know there must be some minor
differences, but I don't know what they are right now.
I also had to tweak src/imagination/vulkan/pvr_device.c again to the
following:
DEF_CONFIG("renesas,r8a774a1-gpu", "renesas,du-r8a774a1"),
I am not positive that is the correct thing to do, but with that, I
can now run vulkaninfo.
I know that it's not fully Vulkan compliant yet, but it appears there
is some progress:
Layers: count = 2
=================
VK_LAYER_MESA_device_select (Linux device selection layer) Vulkan
version 1.3.211, layer version 1:
Layer Extensions: count = 0
Devices: count = 2
GPU id = 0 (Imagination PowerVR Rogue GX6250)
Layer-Device Extensions: count = 0
GPU id = 1 (llvmpipe (LLVM 15.0.7, 128 bits))
Layer-Device Extensions: count = 0
VK_LAYER_MESA_overlay (Mesa Overlay layer) Vulkan version 1.3.211,
layer version 1:
Layer Extensions: count = 0
Devices: count = 2
GPU id = 0 (Imagination PowerVR Rogue GX6250)
Layer-Device Extensions: count = 0
GPU id = 1 (llvmpipe (LLVM 15.0.7, 128 bits))
Layer-Device Extensions: count = 0
I then tried to redndr with vkgears, but it didn't redner. When I run
vkgears, I get the following:
LAYER: Searching for layer manifest files
LAYER: In following locations:
LAYER: /home/aford/.config/vulkan/implicit_layer.d
LAYER: /etc/xdg/xdg-ubuntu/vulkan/implicit_layer.d
LAYER: /etc/xdg/vulkan/implicit_layer.d
LAYER: /etc/vulkan/implicit_layer.d
LAYER: /home/aford/.local/share/vulkan/implicit_layer.d
LAYER: /usr/share/ubuntu/vulkan/implicit_layer.d
LAYER: /usr/share/gnome/vulkan/implicit_layer.d
LAYER: /usr/local/share/vulkan/implicit_layer.d
LAYER: /usr/share/vulkan/implicit_layer.d
LAYER: /var/lib/snapd/desktop/vulkan/implicit_layer.d
LAYER: Found the following files:
LAYER:
/usr/share/vulkan/implicit_layer.d/VkLayer_MESA_device_select.json
LAYER: Searching for layer manifest files
LAYER: In following locations:
LAYER: /home/aford/.config/vulkan/explicit_layer.d
LAYER: /etc/xdg/xdg-ubuntu/vulkan/explicit_layer.d
LAYER: /etc/xdg/vulkan/explicit_layer.d
LAYER: /etc/vulkan/explicit_layer.d
LAYER: /home/aford/.local/share/vulkan/explicit_layer.d
LAYER: /usr/share/ubuntu/vulkan/explicit_layer.d
LAYER: /usr/share/gnome/vulkan/explicit_layer.d
LAYER: /usr/local/share/vulkan/explicit_layer.d
LAYER: /usr/share/vulkan/explicit_layer.d
LAYER: /var/lib/snapd/desktop/vulkan/explicit_layer.d
LAYER: Found the following files:
LAYER:
/usr/share/vulkan/explicit_layer.d/VkLayer_MESA_overlay.json
ERROR: loader_validate_instance_extensions: Instance
extension VK_KHR_wayland_surface not supported by available ICDs or
enabled layers.
Failed to create Vulkan instance.
I have tried running in X.org mode instead of Wayland, but I get a
different set of errors:
[ 11102.013] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 11102.014] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 11102.014] compiled for 1.21.1.7, module version = 0.0.2
[ 11102.014] ABI class: X.Org Video Driver, version 25.2
[ 11102.015] (II) FBDEV(0): using default device
[ 11102.016] (II) modeset(G0): using drv /dev/dri/card1
[ 11102.016] (EE)
Fatal server error:
or all framebuffer devices
[ 11102.016] (EE)
[ 11102.017] (EE)
Please consult the The X.Org Foundation support at http://wiki.x.org for help.
I think I am close.
adam
>
> Matt
>
> [1]: https://github.com/SaschaWillems/Vulkan
