On Fri, Feb 16, 2024 at 3:05 AM Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx> wrote: > > Hi all, > > Am Samstag, 3. Februar 2024, 17:52:49 CET schrieb Adam Ford: > > From: Lucas Stach <l.stach@xxxxxxxxxxxxxx> > > > > The HDMI TX controller on the i.MX8MP SoC is a Synopsys designware IP > > core with a little bit of SoC integration around it. > > > > Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx> > > Signed-off-by: Adam Ford <aford173@xxxxxxxxx> > > > > --- > > V3: Change name and location to better idenfity as a bridge and > > HDMI 2.0a transmitter > > > > Fix typos and feedback from Rob and added ports. > > --- > > .../display/bridge/fsl,imx8mp-hdmi-tx.yaml | 102 ++++++++++++++++++ > > 1 file changed, 102 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml > > > > diff --git > > a/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml > > b/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml > > new file mode 100644 > > index 000000000000..3791c9f4ebab > > --- /dev/null > > +++ > > b/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml > > @@ -0,0 +1,102 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/display/bridge/fsl,imx8mp-hdmi-tx.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Freescale i.MX8MP DWC HDMI TX Encoder > > + > > +maintainers: > > + - Lucas Stach <l.stach@xxxxxxxxxxxxxx> > > + > > +description: > > + The i.MX8MP HDMI transmitter is a Synopsys DesignWare > > + HDMI 2.0a TX controller IP. > > + > > +allOf: > > + - $ref: /schemas/display/bridge/synopsys,dw-hdmi.yaml# > > + > > +properties: > > + compatible: > > + enum: > > + - fsl,imx8mp-hdmi-tx > > + > > + reg-io-width: > > + const: 1 > > + > > + clocks: > > + maxItems: 4 > > + > > + clock-names: > > + items: > > + - const: iahb > > + - const: isfr > > + - const: cec > > + - const: pix > > + > > + power-domains: > > + maxItems: 1 > > + > > + ports: > > + $ref: /schemas/graph.yaml#/properties/ports > > + > > + properties: > > + port@0: > > + $ref: /schemas/graph.yaml#/properties/port > > + description: Parallel RGB input port > > + > > + port@1: > > + $ref: /schemas/graph.yaml#/properties/port > > + description: HDMI output port > > + > > + required: > > + - port@0 > > + - port@1 > > Is this really correct that port@1 is required? AFAICS this host already > supports HPD and DDC by itself, so there is no need for a dedicated HDMI > connector. > With the current state of the drivers this output port is completely ignored > anyway. Yet it works for a lot of people. One of the feedback responses Lucas got was that it was missing the reference to the HDMI connector, so I added it as a response to that feedback. I have tried device trees with and without it, and it doesn't impact anything, but It seems like there may be a requirement for it. adam > > Best regards, > Alexander > > > + > > +required: > > + - compatible > > + - reg > > + - clocks > > + - clock-names > > + - interrupts > > + - power-domains > > + - ports > > + > > +unevaluatedProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/clock/imx8mp-clock.h> > > + #include <dt-bindings/interrupt-controller/irq.h> > > + #include <dt-bindings/power/imx8mp-power.h> > > + > > + hdmi@32fd8000 { > > + compatible = "fsl,imx8mp-hdmi-tx"; > > + reg = <0x32fd8000 0x7eff>; > > + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&clk IMX8MP_CLK_HDMI_APB>, > > + <&clk IMX8MP_CLK_HDMI_REF_266M>, > > + <&clk IMX8MP_CLK_32K>, > > + <&hdmi_tx_phy>; > > + clock-names = "iahb", "isfr", "cec", "pix"; > > + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX>; > > + reg-io-width = <1>; > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + port@0 { > > + reg = <0>; > > + > > + hdmi_tx_from_pvi: endpoint { > > + remote-endpoint = <&pvi_to_hdmi_tx>; > > + }; > > + }; > > + > > + port@1 { > > + reg = <1>; > > + hdmi_tx_out: endpoint { > > + remote-endpoint = <&hdmi0_con>; > > + }; > > + }; > > + }; > > + }; > > > -- > TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany > Amtsgericht München, HRB 105018 > Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider > http://www.tq-group.com/ > >
