Re: [PATCH 1/3] drm/panel: ltk500hd1829: make room for more similar panels

[Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>]

On 2/15/2024 1:05 AM, Heiko Stuebner wrote:
> From: Heiko Stuebner <heiko.stuebner@xxxxxxxxx>
>
> There exist more dsi-panels from Leadtek sharing supplies and timings
> with only the panel-mode and init commands differing.
>
> So make room in the driver to also keep variants here instead of
> requiring additional drivers per panel.
>
> Signed-off-by: Heiko Stuebner <heiko.stuebner@xxxxxxxxx>

Hi Heiko,

Reviewed-by: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>

Thanks,

Jessica Zhang

> ---
>   .../drm/panel/panel-leadtek-ltk500hd1829.c    | 73 ++++++++++++-------
>   1 file changed, 47 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/gpu/drm/panel/panel-leadtek-ltk500hd1829.c b/drivers/gpu/drm/panel/panel-leadtek-ltk500hd1829.c
> index 39e408c9f762f..42f4e2584af18 100644
> --- a/drivers/gpu/drm/panel/panel-leadtek-ltk500hd1829.c
> +++ b/drivers/gpu/drm/panel/panel-leadtek-ltk500hd1829.c
> @@ -11,6 +11,7 @@
>   #include <linux/gpio/consumer.h>
>   #include <linux/module.h>
>   #include <linux/of.h>
> +#include <linux/of_device.h>
>   #include <linux/regulator/consumer.h>
>   
>   #include <video/mipi_display.h>
> @@ -21,25 +22,32 @@
>   #include <drm/drm_modes.h>
>   #include <drm/drm_panel.h>
>   
> +struct ltk500hd1829_cmd {
> +	char cmd;
> +	char data;
> +};
> +
> +struct ltk500hd1829_desc {
> +	const struct drm_display_mode *mode;
> +	const struct ltk500hd1829_cmd *init;
> +	unsigned int num_init;
> +};
> +
>   struct ltk500hd1829 {
>   	struct device *dev;
>   	struct drm_panel panel;
>   	struct gpio_desc *reset_gpio;
>   	struct regulator *vcc;
>   	struct regulator *iovcc;
> +	const struct ltk500hd1829_desc *panel_desc;
>   	bool prepared;
>   };
>   
> -struct ltk500hd1829_cmd {
> -	char cmd;
> -	char data;
> -};
> -
>   /*
>    * There is no description in the Reference Manual about these commands.
>    * We received them from the vendor, so just use them as is.
>    */
> -static const struct ltk500hd1829_cmd init_code[] = {
> +static const struct ltk500hd1829_cmd ltk500hd1829_init[] = {
>   	{ 0xE0, 0x00 },
>   	{ 0xE1, 0x93 },
>   	{ 0xE2, 0x65 },
> @@ -260,6 +268,26 @@ static const struct ltk500hd1829_cmd init_code[] = {
>   	{ 0x35, 0x00 },
>   };
>   
> +static const struct drm_display_mode ltk500hd1829_mode = {
> +	.hdisplay	= 720,
> +	.hsync_start	= 720 + 50,
> +	.hsync_end	= 720 + 50 + 50,
> +	.htotal		= 720 + 50 + 50 + 50,
> +	.vdisplay	= 1280,
> +	.vsync_start	= 1280 + 30,
> +	.vsync_end	= 1280 + 30 + 4,
> +	.vtotal		= 1280 + 30 + 4 + 12,
> +	.clock		= 69217,
> +	.width_mm	= 62,
> +	.height_mm	= 110,
> +};
> +
> +static const struct ltk500hd1829_desc ltk500hd1829_data = {
> +	.mode = &ltk500hd1829_mode,
> +	.init = ltk500hd1829_init,
> +	.num_init = ARRAY_SIZE(ltk500hd1829_init),
> +};
> +
>   static inline
>   struct ltk500hd1829 *panel_to_ltk500hd1829(struct drm_panel *panel)
>   {
> @@ -324,8 +352,8 @@ static int ltk500hd1829_prepare(struct drm_panel *panel)
>   	/* tRT: >= 5ms */
>   	usleep_range(5000, 6000);
>   
> -	for (i = 0; i < ARRAY_SIZE(init_code); i++) {
> -		ret = mipi_dsi_generic_write(dsi, &init_code[i],
> +	for (i = 0; i < ctx->panel_desc->num_init; i++) {
> +		ret = mipi_dsi_generic_write(dsi, &ctx->panel_desc->init[i],
>   					     sizeof(struct ltk500hd1829_cmd));
>   		if (ret < 0) {
>   			dev_err(panel->dev, "failed to write init cmds: %d\n", ret);
> @@ -359,31 +387,17 @@ static int ltk500hd1829_prepare(struct drm_panel *panel)
>   	return ret;
>   }
>   
> -static const struct drm_display_mode default_mode = {
> -	.hdisplay	= 720,
> -	.hsync_start	= 720 + 50,
> -	.hsync_end	= 720 + 50 + 50,
> -	.htotal		= 720 + 50 + 50 + 50,
> -	.vdisplay	= 1280,
> -	.vsync_start	= 1280 + 30,
> -	.vsync_end	= 1280 + 30 + 4,
> -	.vtotal		= 1280 + 30 + 4 + 12,
> -	.clock		= 69217,
> -	.width_mm	= 62,
> -	.height_mm	= 110,
> -};
> -
>   static int ltk500hd1829_get_modes(struct drm_panel *panel,
>   				  struct drm_connector *connector)
>   {
>   	struct ltk500hd1829 *ctx = panel_to_ltk500hd1829(panel);
>   	struct drm_display_mode *mode;
>   
> -	mode = drm_mode_duplicate(connector->dev, &default_mode);
> +	mode = drm_mode_duplicate(connector->dev, ctx->panel_desc->mode);
>   	if (!mode) {
>   		dev_err(ctx->dev, "failed to add mode %ux%u@%u\n",
> -			default_mode.hdisplay, default_mode.vdisplay,
> -			drm_mode_vrefresh(&default_mode));
> +			ctx->panel_desc->mode->hdisplay, ctx->panel_desc->mode->vdisplay,
> +			drm_mode_vrefresh(ctx->panel_desc->mode));
>   		return -ENOMEM;
>   	}
>   
> @@ -413,6 +427,10 @@ static int ltk500hd1829_probe(struct mipi_dsi_device *dsi)
>   	if (!ctx)
>   		return -ENOMEM;
>   
> +	ctx->panel_desc = of_device_get_match_data(dev);
> +	if (!ctx->panel_desc)
> +		return -EINVAL;
> +
>   	ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
>   	if (IS_ERR(ctx->reset_gpio)) {
>   		dev_err(dev, "cannot get reset gpio\n");
> @@ -492,7 +510,10 @@ static void ltk500hd1829_remove(struct mipi_dsi_device *dsi)
>   }
>   
>   static const struct of_device_id ltk500hd1829_of_match[] = {
> -	{ .compatible = "leadtek,ltk500hd1829", },
> +	{
> +		.compatible = "leadtek,ltk500hd1829",
> +		.data = &ltk500hd1829_data,
> +	},
>   	{ /* sentinel */ }
>   };
>   MODULE_DEVICE_TABLE(of, ltk500hd1829_of_match);
> --
> 2.39.2