[PATCH v5 13/13] drm/mediatek: Add comments for the structures

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add comments for the structures to improve readability.

Signed-off-by: Hsiao Chien Sung <shawn.sung@xxxxxxxxxxxx>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
---
 drivers/gpu/drm/mediatek/mtk_disp_ovl.c     | 21 +++++++++++++-
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c     | 22 ++++++++++++--
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 32 +++++++++++++++++++++
 drivers/gpu/drm/mediatek/mtk_drm_drv.h      | 17 +++++++++++
 drivers/gpu/drm/mediatek/mtk_ethdr.c        | 11 +++++++
 5 files changed, 99 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
index cf35783ad4b02..b92c5c3c590a0 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
@@ -164,6 +164,20 @@ static const u32 mt8195_ovl_crc_ofs[] = {
 	DISP_REG_OVL_CRC,
 };
 
+/**
+ * struct mtk_disp_ovl_data - ovl driver data
+ * @addr: offset of the first layer (layer-0)
+ * @gmc_bits: gmc (gating memory clock) bit masks for adjusting positivity for ovl
+ * @layer_nr: layer numbers that ovl supports
+ * @fmt_rgb565_is_0: whether or not rgb565 is represented as 0
+ * @smi_id_en: determine if smi needs to be enabled
+ * @supports_afbc: determine if ovl supports afbc
+ * @formats: format table that ovl supports
+ * @num_formats: number of formats that ovl supports
+ * @supports_clrfmt_ext: whether the ovl supports clear format (for alpha blend)
+ * @crc_ofs: crc offset table
+ * @crc_cnt: count of crc registers (could be more than one bank)
+ */
 struct mtk_disp_ovl_data {
 	unsigned int addr;
 	unsigned int gmc_bits;
@@ -178,10 +192,15 @@ struct mtk_disp_ovl_data {
 	size_t crc_cnt;
 };
 
-/*
+/**
  * struct mtk_disp_ovl - DISP_OVL driver structure
  * @crtc: associated crtc to report vblank events to
+ * @clk: clock of the ovl
+ * @regs: base address of the ovl register that can be accessed by cpu
+ * @cmdq_reg: register related info for cmdq (subsys, offset ...etc.)
  * @data: platform data
+ * @vblank_cb: callback function when vblank irq happened
+ * @vblank_cb_data: data to the callback function
  * @crc: crc related information
  */
 struct mtk_disp_ovl {
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 6cb1ed419dee7..b4f7b3d3bbeb6 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -28,14 +28,30 @@
  * struct mtk_drm_crtc - MediaTek specific crtc structure.
  * @base: crtc object.
  * @enabled: records whether crtc_enable succeeded
+ * @pending_needs_vblank: determine if we need to handle vblank event
+ * @event: the vblank event to handle
  * @planes: array of 4 drm_plane structures, one for each overlay plane
+ * @layer_nr: layer numbers that the crtc supports
  * @pending_planes: whether any plane has pending changes to be applied
+ * @pending_async_planes: if there is any pending async update
+ * @cmdq_client: a handler to control cmdq (mbox channel, thread ...etc.)
+ * @cmdq_handle: cmdq packet to store the commands
+ * @cmdq_event: cmdq event that the thread is waiting for
+ * @cmdq_vblank_cnt: vblank count that is dedicated for the cmdq thread
+ * @cb_blocking_queue: wait queue to determine if cmdq is blocked
  * @mmsys_dev: pointer to the mmsys device for configuration registers
+ * @dma_dev: pointer to the dma device (usually rdma)
  * @mutex: handle to one of the ten disp_mutex streams
- * @ddp_comp_nr: number of components in ddp_comp
+ * @ddp_comp_nr_ori: number of the components excludes the route (origin)
+ * @max_ddp_comp_nr: maximum number of the components in routes
+ * @ddp_comp_nr: number of the components in the current path
  * @ddp_comp: array of pointers the mtk_ddp_comp structures used by this crtc
- *
- * TODO: Needs update: this header is missing a bunch of member descriptions.
+ * @conn_route_nr: number of the components in route
+ * @conn_routes: route to the connector
+ * @hw_lock: mutex lock to avoid race condition when layer config
+ * @config_updating: determine if the layer configuration is done
+ * @crc_provider: get crc provider of the crtc
+ * @frames: count the frames that are added to crc entry
  */
 struct mtk_drm_crtc {
 	struct drm_crtc			base;
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
index 231017470607e..dcf8466b8f857 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
@@ -48,6 +48,38 @@ enum mtk_ddp_comp_type {
 
 struct mtk_ddp_comp;
 struct cmdq_pkt;
+
+/* struct mtk_ddp_comp_funcs - function pointers of the ddp components
+ * @clk_enable: enable the clocks of the component
+ * @clk_disable: disable the clocks of the component
+ * @config: configure the component
+ * @start: start (enable) the component
+ * @stop: stop (disable) the component
+ * @register_vblank_cb: to register a callback function when vblank irq occurs
+ * @unregister_vblank_cb: to unregister the callback function from the vblank irq
+ * @enable_vblank: enable vblank irq
+ * @disable_vblank: disable vblank irq
+ * @supported_rotations: return rotation capability of the component
+ * @layer_nr: how many layers the component supports
+ * @layer_check: to check if the state of the layer is valid for the component
+ * @layer_config: to configure the component according to the state of the layer
+ * @gamma_set: to set gamma for the component
+ * @bgclr_in_on: turn on background color
+ * @bgclr_in_off: turn off background color
+ * @ctm_set: set color transformation matrix
+ * @dma_dev_get: return the device that uses direct memory access
+ * @get_formats: get the format that is currently in use by the component
+ * @get_num_formats: get number of the formats that the component supports
+ * @connect: connect the sub modules of the component
+ * @disconnect: disconnect the sub modules of the component
+ * @add: add the device to the component (mount them in the mutex)
+ * @remove: remove the device from the component (unmount them from the mutex)
+ * @encoder_index: get the encoder index of the component
+ * @crc: return the start of crc array
+ * @crc_cnt: how many CRCs the component supports
+ * @crc_entry: get the pointer to the crc entry
+ * @crc_read: call this function to read crc from the hardware component
+ */
 struct mtk_ddp_comp_funcs {
 	int (*power_on)(struct device *dev);
 	void (*power_off)(struct device *dev);
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.h b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
index 414764b4546ba..8ee1f36a6c2b8 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
@@ -33,6 +33,23 @@ struct mtk_drm_route {
 	const unsigned int route_ddp;
 };
 
+/**
+ * struct mtk_mmsys_driver_data - capabilities for the mmsys
+ * @main_path: path of the main display
+ * @main_len: length of the main display path
+ * @ext_path: path of the external display
+ * @ext_len: length of the external display path
+ * @third_path: path of the third display
+ * @third_len: length of the third display path
+ * @conn_routes: routing table of all the possible connectors
+ * @conn_routes_num: number of the routing table for the connectors
+ * @shadow_register: whether or not shadow register is enabled
+ * @mmsys_id: multi-media system ID
+ * @mmsys_dev_num: number of devices for in the mmsys as a whole
+ * @max_pitch: maximum pitch in bytes that the mmsys supports
+ * @min_width: minimum fb pixel width on this device
+ * @min_height: minimum fb pixel height on this device
+ */
 struct mtk_mmsys_driver_data {
 	const unsigned int *main_path;
 	unsigned int main_len;
diff --git a/drivers/gpu/drm/mediatek/mtk_ethdr.c b/drivers/gpu/drm/mediatek/mtk_ethdr.c
index 30eb2c3d95c0b..eae72deacfd2c 100644
--- a/drivers/gpu/drm/mediatek/mtk_ethdr.c
+++ b/drivers/gpu/drm/mediatek/mtk_ethdr.c
@@ -82,6 +82,17 @@ struct mtk_ethdr_comp {
 	struct cmdq_client_reg	cmdq_base;
 };
 
+/**
+ * struct mtk_ethdr - ethdr driver data
+ * @ethdr_comp: components of ethdr(mixer)
+ * @ethdr_clk: clocks of ethdr components
+ * @mmsys_dev: mmsys device that ethdr binds to
+ * @vblank_cb: callback function when vblank irq occurs
+ * @vblank_cb_data: data fo vblank callback
+ * @irq: irq that triggers irq handler
+ * @reset_ctl: reset control of ethdr
+ * @crc: crc information
+ */
 struct mtk_ethdr {
 	struct mtk_ethdr_comp	ethdr_comp[ETHDR_ID_MAX];
 	struct clk_bulk_data	ethdr_clk[ETHDR_CLK_NUM];
-- 
2.18.0




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux