The LOGINIT, LOGINTR, LOGRM, and LOGPMU buffers are circular buffers that have printf-like logs from GSP-RM and PMU encoded in them. LOGINIT, LOGINTR, and LOGRM are allocated by Nouveau and their DMA addresses are passed to GSP-RM during initialization. The buffers are required for GSP-RM to initialize properly. LOGPMU is also allocated by Nouveau, but its contents are updated when Nouveau receives an NV_VGPU_MSG_EVENT_UCODE_LIBOS_PRINT RPC from GSP-RM. Nouveau then copies the RPC to the buffer. The messages are encoded as an array of variable-length structures that contain the parameters to an NV_PRINTF call. The format string and parameter count are stored in a special ELF image that contains only logging strings. This image is not currently shipped with the Nvidia driver. There are two methods to extract the logs. OpenRM tries to load the logging ELF, and if present, parses the log buffers in real time and outputs the strings to the kernel console. Alternatively, and this is the method used by this patch, the buffers can be exposed to user space, and a user-space tool (along with the logging ELF image) can parse the buffer and dump the logs. This method has the advantage that it allows the buffers to be parsed even when the logging ELF file is not available to the user. However, it has the disadvantage the debubfs entries need to remain until the driver is unloaded. The buffers are exposed via debugfs. The debugfs entries must be created before GSP-RM is started, to ensure that they are available during GSP-RM initialization. If GSP-RM fails to initialize, then Nouveau immediately shuts down the GSP interface. This would normally also deallocate the logging buffers, thereby preventing the user from capturing the debug logs. To avoid this, the keep-gsp-logging command line parameter can be specified. This parmater is marked as *unsafe* (thereby taining the kernel) because the DMA buffer and debugfs entries are never deallocated, even if the driver unloads. This gives the user the time to capture the logs, but it also means that resources can only be recovered by a reboot. An end-user can capture the logs using the following commands: cp /sys/kernel/debug/dri/<path>/loginit loginit cp /sys/kernel/debug/dri/<path>/logrm logrm cp /sys/kernel/debug/dri/<path>/logintr logintr cp /sys/kernel/debug/dri/<path>/logpmu logpmu where <path> is the PCI ID of the GPU (e.g. 0000:65:00.0). If keep-gsp-logging is specified, then the <path> is the same but with -debug appended (e.g. 0000:65:00.0-debug). Since LOGPMU is not needed for normal GSP-RM operation, it is only created if debugfs is available. Otherwise, the NV_VGPU_MSG_EVENT_UCODE_LIBOS_PRINT RPCs are ignored. Signed-off-by: Timur Tabi <ttabi@xxxxxxxxxx> --- v3: reworked r535_gsp_libos_debugfs_init, rebased for drm-next .../gpu/drm/nouveau/include/nvkm/subdev/gsp.h | 12 + .../gpu/drm/nouveau/nvkm/subdev/gsp/r535.c | 215 +++++++++++++++++- 2 files changed, 223 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/nouveau/include/nvkm/subdev/gsp.h b/drivers/gpu/drm/nouveau/include/nvkm/subdev/gsp.h index 3fbc57b16a05..2ee44bdf8be7 100644 --- a/drivers/gpu/drm/nouveau/include/nvkm/subdev/gsp.h +++ b/drivers/gpu/drm/nouveau/include/nvkm/subdev/gsp.h @@ -5,6 +5,8 @@ #include <core/falcon.h> #include <core/firmware.h> +#include <linux/debugfs.h> + #define GSP_PAGE_SHIFT 12 #define GSP_PAGE_SIZE BIT(GSP_PAGE_SHIFT) @@ -217,6 +219,16 @@ struct nvkm_gsp { /* The size of the registry RPC */ size_t registry_rpc_size; + + /* + * Logging buffers in debugfs. The wrapper objects need to remain + * in memory until the dentry is deleted. + */ + struct debugfs_blob_wrapper blob_init; + struct debugfs_blob_wrapper blob_intr; + struct debugfs_blob_wrapper blob_rm; + struct debugfs_blob_wrapper blob_pmu; + struct dentry *debugfs_logging_dir; }; static inline bool diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c b/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c index 86b62c7e1229..56209bf81360 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c @@ -26,6 +26,7 @@ #include <subdev/vfn.h> #include <engine/fifo/chan.h> #include <engine/sec2.h> +#include <drm/drm_device.h> #include <nvfw/fw.h> @@ -1979,6 +1980,196 @@ r535_gsp_rmargs_init(struct nvkm_gsp *gsp, bool resume) return 0; } +#define NV_GSP_MSG_EVENT_UCODE_LIBOS_CLASS_PMU 0xf3d722 + +/** + * r535_gsp_msg_libos_print - capture log message from the PMU + * @priv: gsp pointer + * @fn: function number (ignored) + * @repv: pointer to libos print RPC + * @repc: message size + * + * See _kgspRpcUcodeLibosPrint + */ +static int r535_gsp_msg_libos_print(void *priv, u32 fn, void *repv, u32 repc) +{ + struct nvkm_gsp *gsp = priv; + struct nvkm_subdev *subdev = &gsp->subdev; + struct { + u32 ucodeEngDesc; + u32 libosPrintBufSize; + u8 libosPrintBuf[]; + } *rpc = repv; + unsigned int class = rpc->ucodeEngDesc >> 8; + + nvkm_debug(subdev, "received libos print from class 0x%x for %u bytes\n", + class, rpc->libosPrintBufSize); + + if (class != NV_GSP_MSG_EVENT_UCODE_LIBOS_CLASS_PMU) { + nvkm_warn(subdev, + "received libos print from unknown class 0x%x\n", + class); + return -ENOMSG; + } + if (rpc->libosPrintBufSize > GSP_PAGE_SIZE) { + nvkm_error(subdev, "libos print is too large (%u bytes)\n", + rpc->libosPrintBufSize); + return -E2BIG; + + } + memcpy(gsp->blob_pmu.data, rpc->libosPrintBuf, rpc->libosPrintBufSize); + + return 0; +} + +/* + * If GSP-RM load fails, then the GSP nvkm object will be deleted, the + * logging debugfs entries will be deleted, and it will not be possible to + * debug the load failure. The keep_gsp_logging parameter tells Nouveau + * not to free these resources, even if the driver is unloading. In this + * case, the only recovery is a reboot. + */ +static bool keep_gsp_logging; +module_param_unsafe(keep_gsp_logging, bool, 0444); +MODULE_PARM_DESC(keep_gsp_logging, + "Do not remove the GSP-RM logging debugfs entries upon exit"); + +/** + * r535_gsp_libos_debugfs_init - create logging debugfs entries + * @gsp: gsp pointer + * + * Create the debugfs entries. This exposes the log buffers to + * userspace so that an external tool can parse it. + * + * The 'logpmu' contains exception dumps from the PMU. It is written via an + * RPC sent from GSP-RM and must be only 4KB. We create it here because it's + * only useful if there is a debugfs entry to expose it. If we get the PMU + * logging RPC and there is no debugfs entry, the RPC is just ignored. + * + * The blob_init, blob_rm, and blob_pmu objects can't be transient + * because debugfs_create_blob doesn't copy them. + * + * NOTE: OpenRM loads the logging elf image and prints the log messages + * in real-time. We may add that capability in the future, but that + * requires loading an ELF images that are not distributed with the driver, + * and adding the parsing code to Nouveau. + * + * Ideally, this should be part of nouveau_debugfs_init(), but that function + * is called too late. We really want to create these debugfs entries before + * r535_gsp_booter_load() is called, so that if GSP-RM fails to initialize, + * there could still be a log to capture. + * + * If the unsafe command line pararameter 'keep-gsp-logging' is specified, + * then the logging buffer and debugfs entries will be retained when the + * driver shuts down. This is necessary to debug initialization failures, + * because otherwise the buffers will disappear before the logs can be + * captured. + */ +static void r535_gsp_libos_debugfs_init(struct nvkm_gsp *gsp) +{ + struct dentry *dir_init, *dir_intr, *dir_rm, *dir_pmu; + struct dentry *root, *dir; + struct device *dev = gsp->subdev.device->dev; + + /* + * Under normal circumstances, we add our debugfs entries to the dentry + * created by the DRM layer when the driver registered. However, this + * dentry and everything in it is deleted if GSP fails to initialize. + * + * If keep-gsp-logging is specified, then a different top-entry dentry + * is created and that is used. This dentry is never deleted, even if + * the driver exits. + */ + if (keep_gsp_logging) { + char temp[64]; + + /* Find the 'dri' root debugfs entry. Every GPU has a dentry under it */ + root = debugfs_lookup("dri", NULL); + if (IS_ERR(root)) { + /* No debugfs, or no root dentry for DRM */ + return; + } + + scnprintf(temp, sizeof(temp), "%s-debug", dev_name(dev)); + dir = debugfs_create_dir(temp, root); + dput(root); + if (IS_ERR(dir)) { + nvkm_error(&gsp->subdev, + "failed to create %s debugfs entry\n", temp); + return; + } + + gsp->debugfs_logging_dir = dir; + } else { + /* Each GPU has a subdir based on its device name, so find it */ + struct drm_device *drm_dev = dev_get_drvdata(dev); + + if (!drm_dev || !drm_dev->debugfs_root) { + nvkm_error(&gsp->subdev, "could not find debugfs path\n"); + return; + } + + dir = drm_dev->debugfs_root; + } + + gsp->blob_init.data = gsp->loginit.data; + gsp->blob_init.size = gsp->loginit.size; + gsp->blob_intr.data = gsp->logintr.data; + gsp->blob_intr.size = gsp->logintr.size; + gsp->blob_rm.data = gsp->logrm.data; + gsp->blob_rm.size = gsp->logrm.size; + + /* + * Since the PMU buffer is copied from an RPC, it doesn't need to be + * a DMA buffer. + */ + gsp->blob_pmu.size = GSP_PAGE_SIZE; + gsp->blob_pmu.data = kzalloc(gsp->blob_pmu.size, GFP_KERNEL); + if (!gsp->blob_pmu.data) + goto error; + + dir_init = debugfs_create_blob("loginit", 0444, dir, &gsp->blob_init); + if (IS_ERR(dir_init)) { + nvkm_error(&gsp->subdev, "failed to create loginit debugfs entry\n"); + goto error; + } + + dir_intr = debugfs_create_blob("logintr", 0444, dir, &gsp->blob_intr); + if (IS_ERR(dir_intr)) { + nvkm_error(&gsp->subdev, "failed to create logintr debugfs entry\n"); + goto error; + } + + dir_rm = debugfs_create_blob("logrm", 0444, dir, &gsp->blob_rm); + if (IS_ERR(dir_rm)) { + nvkm_error(&gsp->subdev, "failed to create logrm debugfs entry\n"); + goto error; + } + + dir_pmu = debugfs_create_blob("logpmu", 0444, dir, &gsp->blob_pmu); + if (IS_ERR(dir_pmu)) { + nvkm_error(&gsp->subdev, "failed to create logpmu debugfs entry\n"); + goto error; + } + + i_size_write(d_inode(dir_init), gsp->blob_init.size); + i_size_write(d_inode(dir_intr), gsp->blob_intr.size); + i_size_write(d_inode(dir_rm), gsp->blob_rm.size); + i_size_write(d_inode(dir_pmu), gsp->blob_pmu.size); + + r535_gsp_msg_ntfy_add(gsp, 0x0000100C, r535_gsp_msg_libos_print, gsp); + + nvkm_debug(&gsp->subdev, "created debugfs GSP-RM logging entries\n"); + return; + +error: + debugfs_remove(gsp->debugfs_logging_dir); + gsp->debugfs_logging_dir = NULL; + + kfree(gsp->blob_pmu.data); + gsp->blob_pmu.data = NULL; +} + static inline u64 r535_gsp_libos_id8(const char *name) { @@ -2029,7 +2220,11 @@ static void create_pte_array(u64 *ptes, dma_addr_t addr, size_t size) * written to directly by GSP-RM and can be any multiple of GSP_PAGE_SIZE. * * The physical address map for the log buffer is stored in the buffer - * itself, starting with offset 1. Offset 0 contains the "put" pointer. + * itself, starting with offset 1. Offset 0 contains the "put" pointer (pp). + * Initially, pp is equal to 0. If the buffer has valid logging data in it, + * then pp points to index into the buffer where the next logging entry will + * be written. Therefore, the logging data is valid if: + * 1 <= pp < sizeof(buffer)/sizeof(u64) * * The GSP only understands 4K pages (GSP_PAGE_SIZE), so even if the kernel is * configured for a larger page size (e.g. 64K pages), we need to give @@ -2100,6 +2295,9 @@ r535_gsp_libos_init(struct nvkm_gsp *gsp) args[3].size = gsp->rmargs.size; args[3].kind = LIBOS_MEMORY_REGION_CONTIGUOUS; args[3].loc = LIBOS_MEMORY_REGION_LOC_SYSMEM; + + r535_gsp_libos_debugfs_init(gsp); + return 0; } @@ -2404,9 +2602,18 @@ r535_gsp_dtor(struct nvkm_gsp *gsp) r535_gsp_dtor_fws(gsp); nvkm_gsp_mem_dtor(gsp, &gsp->shm.mem); - nvkm_gsp_mem_dtor(gsp, &gsp->loginit); - nvkm_gsp_mem_dtor(gsp, &gsp->logintr); - nvkm_gsp_mem_dtor(gsp, &gsp->logrm); + + if (keep_gsp_logging && gsp->debugfs_logging_dir) + nvkm_warn(&gsp->subdev, + "GSP-RM logging buffers retained, reboot required to recover\n"); + else { + kfree(gsp->blob_pmu.data); + gsp->blob_pmu.data = NULL; + + nvkm_gsp_mem_dtor(gsp, &gsp->loginit); + nvkm_gsp_mem_dtor(gsp, &gsp->logintr); + nvkm_gsp_mem_dtor(gsp, &gsp->logrm); + } } int -- 2.34.1