[PATCH 5/7] arm64: dts: rockchip: Update powkiddy rk2023 dtsi for RGB10MAX3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Chris Morgan <macromorgan@xxxxxxxxxxx>

Move the vdd_cpu regulator to the device specific dts. This is in
preparation of adding the Powkiddy RGB10MAX3 device, which uses
a different vendor for the CPU regulator at a different i2c address.

Also add an alias to the bluetooth device so that we can change the
compatible string for the RGB10MAX3. This device uses the same pinouts
but a different bluetooth device.

Signed-off-by: Chris Morgan <macromorgan@xxxxxxxxxxx>
---
 .../dts/rockchip/rk3566-powkiddy-rgb30.dts     | 18 ++++++++++++++++++
 .../dts/rockchip/rk3566-powkiddy-rk2023.dts    | 18 ++++++++++++++++++
 .../dts/rockchip/rk3566-powkiddy-rk2023.dtsi   | 18 +-----------------
 3 files changed, 37 insertions(+), 17 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb30.dts b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb30.dts
index 0ac64f043b80..1f567a14ac84 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb30.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb30.dts
@@ -37,3 +37,21 @@ mipi_in_panel: endpoint {
 		};
 	};
 };
+
+&i2c0 {
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1390000>;
+		regulator-name = "vdd_cpu";
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc_sys>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts
index ba32d0793dca..bc9933d9e262 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts
@@ -36,3 +36,21 @@ mipi_in_panel: endpoint {
 		};
 	};
 };
+
+&i2c0 {
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1390000>;
+		regulator-name = "vdd_cpu";
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc_sys>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dtsi
index 0fa8f06f94cd..3ab751a01cb2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dtsi
@@ -614,22 +614,6 @@ rk817_charger: charger {
 			rockchip,sleep-filter-current-microamp = <100000>;
 		};
 	};
-
-	vdd_cpu: regulator@1c {
-		compatible = "tcs,tcs4525";
-		reg = <0x1c>;
-		fcs,suspend-voltage-selector = <1>;
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1390000>;
-		regulator-name = "vdd_cpu";
-		regulator-ramp-delay = <2300>;
-		vin-supply = <&vcc_sys>;
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
 };
 
 &i2c5 {
@@ -805,7 +789,7 @@ &uart1 {
 	uart-has-rtscts;
 	status = "okay";
 
-	bluetooth {
+	bluetooth: bluetooth {
 		compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
 		device-wake-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
 		enable-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
-- 
2.34.1




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux