From: Chris Morgan <macromorgan@xxxxxxxxxxx>
Add support for the Powkiddy RGB10MAX3. The Powkiddy RGB10MAX3 is a
handheld gaming device with a 720p 5.0 inch screen powered by the
Rockchip RK3566 SoC. It includes a Realtek 8723ds WiFi/BT module, 2 ADC
joysticks powered by a 4-way muxed ADC channel, and several GPIO
face buttons. There are 2 SDMMC slots (sdmmc1 and sdmmc3), 3 pwm
controlled LEDs, and the device includes 1GB of RAM.
Signed-off-by: Chris Morgan <macromorgan@xxxxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../rockchip/rk3566-powkiddy-rgb10max3.dts | 87 +++++++++++++++++++
2 files changed, 88 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb10max3.dts
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index a7b30e11beaf..3c4f87e4db61 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -78,6 +78,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353vs.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg503.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rgb10max3.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rgb30.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rk2023.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-x55.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb10max3.dts b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb10max3.dts
new file mode 100644
index 000000000000..fd1a01744a25
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb10max3.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566-powkiddy-rk2023.dtsi"
+
+/ {
+ model = "Powkiddy RGB10MAX3";
+ compatible = "powkiddy,rgb10max3", "rockchip,rk3566";
+};
+
+&bluetooth {
+ compatible = "realtek,rtl8723ds-bt";
+};
+
+&cru {
+ assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
+ <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
+ assigned-clock-rates = <32768>, <1200000000>,
+ <200000000>, <126400000>;
+};
+
+&dsi0 {
+ panel: panel@0 {
+ compatible = "powkiddy,rgb10max3-panel";
+ reg = <0>;
+ backlight = <&backlight>;
+ iovcc-supply = <&vcc3v3_lcd0_n>;
+ pinctrl-0 = <&lcd_rst>;
+ pinctrl-names = "default";
+ reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
+ rotation = <270>;
+ vcc-supply = <&vcc3v3_lcd0_n>;
+
+ port {
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
+ };
+ };
+ };
+};
+
+&green_led {
+ default-state = "on";
+ function = LED_FUNCTION_POWER;
+};
+
+&i2c0 {
+ vdd_cpu: regulator@40 {
+ compatible = "fcs,fan53555";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1390000>;
+ regulator-name = "vdd_cpu";
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc_sys>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&leds {
+ amber_led: led-2 {
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_CHARGING;
+ max-brightness = <255>;
+ pwms = <&pwm0 0 25000 0>;
+ };
+};
+
+&pwm0 {
+ pinctrl-0 = <&pwm0m1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&red_led {
+ default-state = "off";
+ function = LED_FUNCTION_STATUS;
+};
--
2.34.1
