Re: [PATCH v2 15/19] drm/msm/dp: enable SDP and SDE periph flush update

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 10 Feb 2024 at 23:49, Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx> wrote:
>
>
>
> On 2/10/2024 2:16 AM, Dmitry Baryshkov wrote:
> > On Sat, 10 Feb 2024 at 03:52, Paloma Arellano <quic_parellan@xxxxxxxxxxx> wrote:
> >>
> >> DP controller can be setup to operate in either SDP update flush mode or
> >> peripheral flush mode based on the DP controller hardware version.
> >>
> >> Starting in DP v1.2, the hardware documents require the use of
> >> peripheral flush mode for SDP packets such as PPS OR VSC SDP packets.
> >>
> >> In-line with this guidance, lets program the DP controller to use
> >> peripheral flush mode starting DP v1.2
> >>
> >> Changes in v2:
> >>          - Use the original dp_catalog_hw_revision() function to
> >>            correctly check the DP HW version
> >>
> >> Signed-off-by: Paloma Arellano <quic_parellan@xxxxxxxxxxx>
> >> ---
> >>   drivers/gpu/drm/msm/dp/dp_catalog.c | 17 +++++++++++++++++
> >>   drivers/gpu/drm/msm/dp/dp_catalog.h |  1 +
> >>   drivers/gpu/drm/msm/dp/dp_ctrl.c    |  1 +
> >>   drivers/gpu/drm/msm/dp/dp_reg.h     |  2 ++
> >>   4 files changed, 21 insertions(+)
> >>
>
> <Snip>
>
> >>
> >> diff --git a/drivers/gpu/drm/msm/dp/dp_reg.h b/drivers/gpu/drm/msm/dp/dp_reg.h
> >> index 2983756c125cd..6ac66532b47a4 100644
> >> --- a/drivers/gpu/drm/msm/dp/dp_reg.h
> >> +++ b/drivers/gpu/drm/msm/dp/dp_reg.h
> >> @@ -102,6 +102,8 @@
> >>   #define DP_MAINLINK_CTRL_ENABLE                        (0x00000001)
> >>   #define DP_MAINLINK_CTRL_RESET                 (0x00000002)
> >>   #define DP_MAINLINK_CTRL_SW_BYPASS_SCRAMBLER   (0x00000010)
> >> +#define DP_MAINLINK_FLUSH_MODE_UPDATE_SDP      (0x00800000)
> >> +#define DP_MAINLINK_FLUSH_MODE_SDE_PERIPH_UPDATE       (0x01800000)
> >
> > Just one bit here, please.
> >
>
> hmm .... so the periph flush bits are 24:23 and we need a value of 3 to
> select peripheral flush which translates to 0x01800000.
>
> How do you suggest to break this up?

Then FIELD_PREP(something_mask, 3). Otherwise it is too easy to
consider it to be DP_MAINLINK_FLUSH_MODE_UPDATE_SDP | BIT(24)

>
> >>   #define DP_MAINLINK_FB_BOUNDARY_SEL            (0x02000000)
> >>
> >>   #define REG_DP_STATE_CTRL                      (0x00000004)
> >> --
> >> 2.39.2
> >>
> >
> >



-- 
With best wishes
Dmitry



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux