On Fri, Feb 09, 2024 at 05:53:07PM +0100, Xaver Hugl wrote: > Signed-off-by: Xaver Hugl <xaver.hugl@xxxxxxx> > --- > drivers/gpu/drm/drm_connector.c | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c > index b0516505f7ae..01e13984629b 100644 > --- a/drivers/gpu/drm/drm_connector.c > +++ b/drivers/gpu/drm/drm_connector.c > @@ -2158,6 +2158,14 @@ EXPORT_SYMBOL(drm_mode_create_aspect_ratio_property); > * one supported. Sink supported colorspaces should be retrieved by > * userspace from EDID and driver will not explicitly expose them. > * > + * As userspace can't currently know whether or not the output is using > + * RGB or YCC signalling, the driver must translate properties to their > + * relevant RGB or YCC counterparts, depending on the actually used > + * signalling. Property values that are only valid for either YCC or RGB > + * and have no equivalent for the other signalling type must not be > + * exposed as supported, unless the driver can guarantee it never uses > + * the signalling that doesn't match the property. > + * > * Basically the expectation from userspace is: > * - Set up CRTC DEGAMMA/CTM/GAMMA to convert to some sink > * colorspace > -- > 2.43.0 > Thank you! Reviewed-by: Sebastian Wick <sebastian.wick@xxxxxxxxxx>
