On Mon, Jan 22, 2024 at 05:30:44PM +0100, Boris Brezillon wrote: > From: Liviu Dudau <liviu.dudau@xxxxxxx> > > Arm has introduced a new v10 GPU architecture that replaces the Job Manager > interface with a new Command Stream Frontend. It adds firmware driven > command stream queues that can be used by kernel and user space to submit > jobs to the GPU. > > Add the initial schema for the device tree that is based on support for > RK3588 SoC. The minimum number of clocks is one for the IP, but on Rockchip > platforms they will tend to expose the semi-independent clocks for better > power management. > > v4: > - Fix formatting issue > > v3: > - Cleanup commit message to remove redundant text > - Added opp-table property and re-ordered entries > - Clarified power-domains and power-domain-names requirements for RK3588. > - Cleaned up example > > Note: power-domains and power-domain-names requirements for other platforms > are still work in progress, hence the bindings are left incomplete here. > > v2: > - New commit > > Signed-off-by: Liviu Dudau <liviu.dudau@xxxxxxx> > Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx> > Cc: Rob Herring <robh+dt@xxxxxxxxxx> > Cc: Conor Dooley <conor+dt@xxxxxxxxxx> > Cc: devicetree@xxxxxxxxxxxxxxx > Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx> > --- > .../bindings/gpu/arm,mali-valhall-csf.yaml | 147 ++++++++++++++++++ > 1 file changed, 147 insertions(+) > create mode 100644 Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml > > diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml > new file mode 100644 > index 000000000000..be1f6bacc3f3 > --- /dev/null > +++ b/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml > @@ -0,0 +1,147 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/gpu/arm,mali-valhall-csf.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: ARM Mali Valhall GPU > + > +maintainers: > + - Liviu Dudau <liviu.dudau@xxxxxxx> > + - Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx> > + > +properties: > + $nodename: > + pattern: '^gpu@[a-f0-9]+$' > + > + compatible: > + oneOf: > + - items: > + - enum: > + - rockchip,rk3588-mali > + - const: arm,mali-valhall-csf # Mali Valhall GPU model/revision is fully discoverable > + > + reg: > + maxItems: 1 > + > + interrupts: > + items: > + - description: Job interrupt > + - description: MMU interrupt > + - description: GPU interrupt > + > + interrupt-names: > + items: > + - const: job > + - const: mmu > + - const: gpu > + > + clocks: > + minItems: 1 > + maxItems: 3 > + > + clock-names: > + minItems: 1 > + items: > + - const: core > + - const: coregroup > + - const: stacks > + > + mali-supply: true > + > + operating-points-v2: true > + opp-table: > + type: object > + > + power-domains: > + minItems: 1 > + maxItems: 5 > + > + power-domain-names: > + minItems: 1 > + maxItems: 5 > + > + sram-supply: true > + > + "#cooling-cells": > + const: 2 > + > + dynamic-power-coefficient: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + A u32 value that represents the running time dynamic > + power coefficient in units of uW/MHz/V^2. The > + coefficient can either be calculated from power > + measurements or derived by analysis. > + > + The dynamic power consumption of the GPU is > + proportional to the square of the Voltage (V) and > + the clock frequency (f). The coefficient is used to > + calculate the dynamic power as below - > + > + Pdyn = dynamic-power-coefficient * V^2 * f > + > + where voltage is in V, frequency is in MHz. > + > + dma-coherent: true > + > +required: > + - compatible > + - reg > + - interrupts > + - interrupt-names > + - clocks > + - mali-supply > + > +additionalProperties: false > + > +allOf: > + - if: > + properties: > + compatible: > + contains: > + const: rockchip,rk3588-mali > + then: > + properties: > + clocks: > + minItems: 3 > + power-domains: > + maxItems: 1 > + power-domain-names: false > + > +examples: > + - | > + #include <dt-bindings/clock/rockchip,rk3588-cru.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/power/rk3588-power.h> > + > + gpu: gpu@fb000000 { > + compatible = "rockchip,rk3588-mali", "arm,mali-valhall-csf"; > + reg = <0xfb000000 0x200000>; > + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH 0>, > + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH 0>, > + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH 0>; > + interrupt-names = "job", "mmu", "gpu"; > + clock-names = "core", "coregroup", "stacks"; > + clocks = <&cru CLK_GPU>, <&cru CLK_GPU_COREGROUP>, > + <&cru CLK_GPU_STACKS>; > + power-domains = <&power RK3588_PD_GPU>; > + operating-points-v2 = <&gpu_opp_table>; > + mali-supply = <&vdd_gpu_s0>; > + sram-supply = <&vdd_gpu_mem_s0>; > + }; > + > + gpu_opp_table: opp-table { Move this into the gpu node. With that, Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > + compatible = "operating-points-v2"; > + opp-300000000 { > + opp-hz = /bits/ 64 <300000000>; > + opp-microvolt = <675000 675000 850000>; > + }; > + opp-400000000 { > + opp-hz = /bits/ 64 <400000000>; > + opp-microvolt = <675000 675000 850000>; > + }; > + }; > + > +... > -- > 2.43.0 >
