Re: [PATCH v2 10/10] drm/vboxvideo: fix mapping leaks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Philipp,

On 1/23/24 10:43, Philipp Stanner wrote:
> When the PCI devres API was introduced to this driver, it was wrongly
> assumed that initializing the device with pcim_enable_device() instead
> of pci_enable_device() will make all PCI functions managed.
> 
> This is wrong and was caused by the quite confusing devres API for PCI
> in which some, but not all, functions become managed that way.
> 
> The function pci_iomap_range() is never managed.
> 
> Replace pci_iomap_range() with the actually managed function
> pcim_iomap_range().
> 
> Additionally, add a call to pcim_request_region() to ensure exclusive
> access to BAR 0.

I'm a bit worried about this last change. There might be
issues where the pcim_request_region() fails due to
e.g. a conflict with the simplefb / simpledrm code.

There is a drm_aperture_remove_conflicting_pci_framebuffers()
call done before hw_init() gets called, but still this
has been known to cause issues in the past.

Can you split out the adding of the pcim_request_region()
into a separate patch and *not* mark that separate patch
for stable ?

Regards,

Hans





> 
> CC: <stable@xxxxxxxxxxxxxxx> # v5.10+
> Fixes: 8558de401b5f ("drm/vboxvideo: use managed pci functions")
> Signed-off-by: Philipp Stanner <pstanner@xxxxxxxxxx>
> ---
>  drivers/gpu/drm/vboxvideo/vbox_main.c | 24 +++++++++++++-----------
>  1 file changed, 13 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/gpu/drm/vboxvideo/vbox_main.c b/drivers/gpu/drm/vboxvideo/vbox_main.c
> index 42c2d8a99509..7f686a0190e6 100644
> --- a/drivers/gpu/drm/vboxvideo/vbox_main.c
> +++ b/drivers/gpu/drm/vboxvideo/vbox_main.c
> @@ -42,12 +42,11 @@ static int vbox_accel_init(struct vbox_private *vbox)
>  	/* Take a command buffer for each screen from the end of usable VRAM. */
>  	vbox->available_vram_size -= vbox->num_crtcs * VBVA_MIN_BUFFER_SIZE;
>  
> -	vbox->vbva_buffers = pci_iomap_range(pdev, 0,
> -					     vbox->available_vram_size,
> -					     vbox->num_crtcs *
> -					     VBVA_MIN_BUFFER_SIZE);
> -	if (!vbox->vbva_buffers)
> -		return -ENOMEM;
> +	vbox->vbva_buffers = pcim_iomap_range(
> +			pdev, 0, vbox->available_vram_size,
> +			vbox->num_crtcs * VBVA_MIN_BUFFER_SIZE);
> +	if (IS_ERR(vbox->vbva_buffers))
> +		return PTR_ERR(vbox->vbva_buffers);
>  
>  	for (i = 0; i < vbox->num_crtcs; ++i) {
>  		vbva_setup_buffer_context(&vbox->vbva_info[i],
> @@ -115,12 +114,15 @@ int vbox_hw_init(struct vbox_private *vbox)
>  
>  	DRM_INFO("VRAM %08x\n", vbox->full_vram_size);
>  
> +	ret = pcim_request_region(pdev, 0, "vboxvideo");
> +	if (ret)
> +		return ret;
> +
>  	/* Map guest-heap at end of vram */
> -	vbox->guest_heap =
> -	    pci_iomap_range(pdev, 0, GUEST_HEAP_OFFSET(vbox),
> -			    GUEST_HEAP_SIZE);
> -	if (!vbox->guest_heap)
> -		return -ENOMEM;
> +	vbox->guest_heap = pcim_iomap_range(pdev, 0,
> +			GUEST_HEAP_OFFSET(vbox), GUEST_HEAP_SIZE);
> +	if (IS_ERR(vbox->guest_heap))
> +		return PTR_ERR(vbox->guest_heap);
>  
>  	/* Create guest-heap mem-pool use 2^4 = 16 byte chunks */
>  	vbox->guest_pool = devm_gen_pool_create(vbox->ddev.dev, 4, -1,




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux