Prefer using the struct drm_edid based functions. Cc: Adrien Grassein <adrien.grassein@xxxxxxxxx> Cc: Andrzej Hajda <andrzej.hajda@xxxxxxxxx> Cc: Neil Armstrong <neil.armstrong@xxxxxxxxxx> Cc: Robert Foss <rfoss@xxxxxxxxxx> Cc: Laurent Pinchart <Laurent.pinchart@xxxxxxxxxxxxxxxx> Cc: Jonas Karlman <jonas@xxxxxxxxx> Cc: Jernej Skrabec <jernej.skrabec@xxxxxxxxx> Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx> --- drivers/gpu/drm/bridge/lontium-lt8912b.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/bridge/lontium-lt8912b.c b/drivers/gpu/drm/bridge/lontium-lt8912b.c index 9c0ffc1c6fac..e7c4bef74aa4 100644 --- a/drivers/gpu/drm/bridge/lontium-lt8912b.c +++ b/drivers/gpu/drm/bridge/lontium-lt8912b.c @@ -620,8 +620,8 @@ lt8912_bridge_detect(struct drm_bridge *bridge) return lt8912_check_cable_status(lt); } -static struct edid *lt8912_bridge_get_edid(struct drm_bridge *bridge, - struct drm_connector *connector) +static const struct drm_edid *lt8912_bridge_edid_read(struct drm_bridge *bridge, + struct drm_connector *connector) { struct lt8912 *lt = bridge_to_lt8912(bridge); @@ -630,7 +630,7 @@ static struct edid *lt8912_bridge_get_edid(struct drm_bridge *bridge, * given to the hdmi connector node. */ if (lt->hdmi_port->ops & DRM_BRIDGE_OP_EDID) - return drm_bridge_get_edid(lt->hdmi_port, connector); + return drm_bridge_edid_read(lt->hdmi_port, connector); dev_warn(lt->dev, "The connected bridge does not supports DRM_BRIDGE_OP_EDID\n"); return NULL; @@ -642,7 +642,7 @@ static const struct drm_bridge_funcs lt8912_bridge_funcs = { .mode_set = lt8912_bridge_mode_set, .enable = lt8912_bridge_enable, .detect = lt8912_bridge_detect, - .get_edid = lt8912_bridge_get_edid, + .edid_read = lt8912_bridge_edid_read, }; static int lt8912_bridge_resume(struct device *dev) -- 2.39.2