Comment # 2
on bug 67876
from jim.cromie@gmail.com
thank you Alex, the firmware page helped some. Turns out I needed more than the CEDAR_smc.bin, (which fwiw was never warned about) [ 1.756212] radeon 0000:01:00.0: radeon_uvd: Can't load firmware "radeon/CYPRESS_uvd.bin" which went away only after fetching that FW too. So, having both FWs, I tested current master and it worked. (I'll assume that means my bisect-bad would too) $ uname -r 3.11.0-rc4-x2-00050-gb7bc9e7 [jimc@groucho bootlogs]$ dmesg| grep -E 'radeon|drm' [ 1.741557] [drm] Initialized drm 1.1.0 20060810 [ 1.773454] dynamic_debug:ddebug_add_module: 1 debug prints in module radeon [ 1.775402] [drm] radeon kernel modesetting enabled. [ 1.775714] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68E1 0x1787:0x3000). [ 1.775734] [drm] register mmio base: 0xFE9E0000 [ 1.775735] [drm] register mmio size: 131072 [ 1.776643] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 1.776645] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF [ 1.776647] [drm] Detected VRAM RAM=1024M, BAR=256M [ 1.776648] [drm] RAM width 64bits DDR [ 1.776755] [drm] radeon: 1024M of VRAM memory ready [ 1.776757] [drm] radeon: 512M of GTT memory ready. [ 1.777788] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 1.778782] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 1.778799] [drm] Loading CEDAR Microcode [ 1.788485] [drm] PCIE GART of 512M enabled (table at 0x000000000025D000). [ 1.788599] radeon 0000:01:00.0: WB enabled [ 1.788602] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88021e466c00 [ 1.788604] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88021e466c0c [ 1.788607] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9001101c418 [ 1.788609] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 1.788610] [drm] Driver supports precise vblank timestamp query. [ 1.788632] radeon 0000:01:00.0: irq 42 for MSI/MSI-X [ 1.788644] radeon 0000:01:00.0: radeon: using MSI. [ 1.788667] [drm] radeon: irq initialized. [ 1.804943] [drm] ring test on 0 succeeded in 1 usecs [ 1.805001] [drm] ring test on 3 succeeded in 1 usecs [ 2.992422] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 4.013574] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 5.034731] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 6.055874] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 7.077016] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 8.098157] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 9.119302] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 10.140429] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 11.161610] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 12.182794] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 12.202894] [drm:r600_uvd_init] *ERROR* UVD not responding, giving up!!! [ 12.202973] [drm:evergreen_startup] *ERROR* radeon: error initializing UVD (-1). Im a bit puzzled at the apparent need for 2 different CODENAME_ firmwares, an also why theres no warning for missing CEDAR_smc.bin
You are receiving this mail because:
- You are the assignee for the bug.
_______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel