[PATCH v2 4/9] accel/ivpu: Add diagnostic messages when VPU fails to boot or suspend

[Jacek Lawrynowicz <jacek.lawrynowicz@xxxxxxxxxxxxxxx>]

From: "Wachowski, Karol" <karol.wachowski@xxxxxxxxx>

Make boot/suspend failure debugging easier by dumping FW logs and error
registers.

Signed-off-by: Wachowski, Karol <karol.wachowski@xxxxxxxxx>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@xxxxxxxxxxxxxxx>
Reviewed-by: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
---
 drivers/accel/ivpu/ivpu_drv.c | 5 +++--
 drivers/accel/ivpu/ivpu_pm.c  | 4 +++-
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/accel/ivpu/ivpu_drv.c b/drivers/accel/ivpu/ivpu_drv.c
index 0c3180411b0e..ec66c2c39877 100644
--- a/drivers/accel/ivpu/ivpu_drv.c
+++ b/drivers/accel/ivpu/ivpu_drv.c
@@ -17,6 +17,7 @@
 #include "ivpu_debugfs.h"
 #include "ivpu_drv.h"
 #include "ivpu_fw.h"
+#include "ivpu_fw_log.h"
 #include "ivpu_gem.h"
 #include "ivpu_hw.h"
 #include "ivpu_ipc.h"
@@ -340,8 +341,6 @@ static int ivpu_wait_for_ready(struct ivpu_device *vdev)
 
 	if (!ret)
 		ivpu_dbg(vdev, PM, "VPU ready message received successfully\n");
-	else
-		ivpu_hw_diagnose_failure(vdev);
 
 	return ret;
 }
@@ -369,7 +368,9 @@ int ivpu_boot(struct ivpu_device *vdev)
 	ret = ivpu_wait_for_ready(vdev);
 	if (ret) {
 		ivpu_err(vdev, "Failed to boot the firmware: %d\n", ret);
+		ivpu_hw_diagnose_failure(vdev);
 		ivpu_mmu_evtq_dump(vdev);
+		ivpu_fw_log_dump(vdev);
 		return ret;
 	}
 
diff --git a/drivers/accel/ivpu/ivpu_pm.c b/drivers/accel/ivpu/ivpu_pm.c
index 0af8864cb3b5..8407f1d8c99c 100644
--- a/drivers/accel/ivpu/ivpu_pm.c
+++ b/drivers/accel/ivpu/ivpu_pm.c
@@ -13,6 +13,7 @@
 #include "ivpu_drv.h"
 #include "ivpu_hw.h"
 #include "ivpu_fw.h"
+#include "ivpu_fw_log.h"
 #include "ivpu_ipc.h"
 #include "ivpu_job.h"
 #include "ivpu_jsm_msg.h"
@@ -247,7 +248,8 @@ int ivpu_pm_runtime_suspend_cb(struct device *dev)
 		ivpu_err(vdev, "Failed to set suspend VPU: %d\n", ret);
 
 	if (!hw_is_idle) {
-		ivpu_warn(vdev, "VPU failed to enter idle, force suspended.\n");
+		ivpu_err(vdev, "VPU failed to enter idle, force suspended.\n");
+		ivpu_fw_log_dump(vdev);
 		ivpu_pm_prepare_cold_boot(vdev);
 	} else {
 		ivpu_pm_prepare_warm_boot(vdev);
-- 
2.43.0